Statistical phase-screen model for second-harmonic beam distortion by body wall tissue in tissue harmonic imaging

2006 ◽  
Author(s):  
X. Yan
Keyword(s):  
Body Wall ◽  
Second Harmonic ◽  
Harmonic Imaging ◽  
Phase Screen ◽  
Tissue Harmonic Imaging ◽  
Screen Model ◽  
Harmonic Beam

Adaptive Ultrasound Tissue Harmonic Imaging Based on an Improved Ensemble Empirical Mode Decomposition Algorithm

2020 ◽  
Vol 42 (2) ◽  
pp. 57-73
Author(s):  
Suya Han ◽  
Yufeng Zhang ◽  
Keyan Wu ◽  
Bingbing He ◽  
Kexin Zhang ◽  
...  
Keyword(s):  
Empirical Mode Decomposition ◽  
Second Harmonic ◽  
Ensemble Empirical Mode Decomposition ◽  
Harmonic Imaging ◽  
Motion Artifacts ◽  
Intrinsic Mode Functions ◽  
Tissue Harmonic Imaging ◽  
Mode Decomposition ◽  
Adaptive Noise ◽  
Harmonic Components

Complete and accurate separation of harmonic components from the ultrasonic radio frequency (RF) echo signals is essential to improve the quality of harmonic imaging. There are limitations in the existing two commonly used separation methods, that is, the subjectivity for the high-pass filtering (S_HPF) method and motion artifacts for the pulse inversion (S_PI) method. A novel separation method called S_CEEMDAN, based on the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) algorithm, is proposed to adaptively separate the second harmonic components for ultrasound tissue harmonic imaging. First, the ensemble size of the CEEMDAN algorithm is calculated adaptively according to the standard deviation of the added white noise. A set of intrinsic mode functions (IMFs) is then obtained by the CEEMDAN algorithm from the ultrasonic RF echo signals. According to the IMF spectra, the IMFs that contain both fundamental and harmonic components are further decomposed. The separation process is performed until all the obtained IMFs have been divided into either fundamental or harmonic categories. Finally, the fundamental and harmonic RF echo signals are obtained from the accumulations of signals from these two categories, respectively. In simulation experiments based on CREANUIS, the S_CEEMDAN-based results are similar to the S_HPF-based results, but better than the S_PI-based results. For the dynamic carotid artery measurements, the contrasts, contrast-to-noise ratios (CNRs), and tissue-to-clutter ratios (TCRs) of the harmonic images based on the S_CEEMDAN are averagely increased by 31.43% and 50.82%, 18.96% and 10.83%, as well as 34.23% and 44.18%, respectively, compared with those based on the S_HPF and S_PI methods. In conclusion, the S_CEEMDAN method provides improved harmonic images owing to its good adaptivity and lower motion artifacts, and is thus a potential alternative to the current methods for ultrasonic harmonic imaging.

scholarly journals Interleaved Array Transducer with Polarization Inversion Technique to Implement Ultrasound Tissue Harmonic Imaging

Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 3915
Author(s):  
Chan Yuk Park ◽  
Jin Ho Sung ◽  
Eun Young Jeong ◽  
Hee Su Lee ◽  
Jong Seob Jeong
Keyword(s):  
Resonant Frequency ◽  
Second Harmonic ◽  
Piezoelectric Materials ◽  
Harmonic Imaging ◽  
Tissue Harmonic Imaging ◽  
Element Analysis ◽  
Broad Bandwidth ◽  
Array Transducer ◽  
Novel Structure ◽  
Piezoelectric Elements

In ultrasound tissue harmonic imaging (THI), it is preferred that the bandwidth of the array transducer covers at least the fundamental frequency f0 for transmission and the second harmonic frequency 2f0 for reception. However, it is challenging to develop an array transducer with a broad bandwidth due to the single resonance characteristics of piezoelectric materials. In this study, we present an improved interleaved array transducer suitable for THI and a dedicated transducer fabrication scheme. The proposed array transducer has a novel structure in which conventional elements exhibiting f0 resonant frequency and polarization-inverted elements exhibiting 2f0 resonant frequency are alternately located, and the thicknesses of all piezoelectric elements are identical. The performance of the proposed method was demonstrated by finite element analysis (FEA) simulations and experiments using a fabricated prototype array transducer. Using the proposed technique, f0 and 2f0 frequency ultrasounds can be efficiently transmitted and received, respectively, resulting in a 90% broad bandwidth feature of the transducer. Thus, the proposed technique can be one of the potential ways to implement high resolution THI.

Sign in / Sign up

Export Citation Format

Share Document