Characterization of Si p-i-n diode for scanning transmission ion microanalysis of biological samples

2006 ◽  
Vol 77 (5) ◽  
pp. 056102 ◽  
Author(s):  
G. Devès ◽  
S. Matsuyama ◽  
Y. Barbotteau ◽  
K. Ishii ◽  
R. Ortega
Keyword(s):  
Biological Samples ◽  
Scanning Transmission ◽  
Ion Microanalysis

Physical Failure Analysis Techniques for Front-End-of-Line Defect Analysis

2016 ◽  
Author(s):  
Dirk Doyle ◽  
Lawrence Benedict ◽  
Fritz Christian Awitan
Keyword(s):  
Cross Section ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Gate Oxide ◽  
Top Down ◽  
New Techniques ◽  
First Case ◽  
Transmission Electron ◽  
Scanning Transmission

Abstract Novel techniques to expose substrate-level defects are presented in this paper. New techniques such as inter-layer dielectric (ILD) thinning, high keV imaging, and XeF2 poly etch overflow are introduced. We describe these techniques as applied to two different defects types at FEOL. In the first case, by using ILD thinning and high keV imaging, coupled with focused ion beam (FIB) cross section and scanning transmission electron microscopy (STEM,) we were able to judge where to sample for TEM from a top down perspective while simultaneously providing the top down images giving both perspectives on the same sample. In the second case we show retention of the poly Si short after removal of CoSi2 formation on poly. Removal of the CoSi2 exposes the poly Si such that we can utilize XeF2 to remove poly without damaging gate oxide to reveal pinhole defects in the gate oxide. Overall, using these techniques have led to 1) increased chances of successfully finding the defects, 2) better characterization of the defects by having a planar view perspective and 3) reduced time in localizing defects compared to performing cross section alone.

Intergrowth of niobium tungsten oxides of the tetragonal tungsten bronze type

2020 ◽  
Vol 75 (11) ◽  
pp. 913-919
Author(s):  
Frank Krumeich
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Tungsten Bronze ◽  
Structural Complexity ◽  
Dark Field ◽  
Tetragonal Tungsten Bronze ◽  
Tungsten Oxides ◽  
Transmission Electron ◽  
Scanning Transmission

AbstractSince the 1970s, high-resolution transmission electron microscopy (HRTEM) is well established as the most appropriate method to explore the structural complexity of niobium tungsten oxides. Today, scanning transmission electron microscopy (STEM) represents an important alternative for performing the structural characterization of such oxides. STEM images recorded with a high-angle annular dark field (HAADF) detector provide not only information about the cation positions but also about the distribution of niobium and tungsten as the intensity is directly correlated to the local scattering potential. The applicability of this method is demonstrated here for the characterization of the real structure of Nb7W10O47.5. This sample contains well-ordered domains of Nb8W9O47 and Nb4W7O31 besides little ordered areas according to HRTEM results. Structural models for Nb4W7O31 and twinning occurring in this phase have been derived from the interpretation of HAADF-STEM images. A remarkable grain boundary between well-ordered domains of Nb4W7O31 and Nb8W9O47 has been found that contains one-dimensionally periodic features. Furthermore, short-range order observed in less ordered areas could be attributed to an intimate intergrowth of small sections of different tetragonal tungsten bronze (TTB) based structures.

scholarly journals Ion Mobility–Mass Spectrometry for Bioanalysis

Separations ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 33
Author(s):  
Xavier Garcia ◽  
Maria del Mar Sabaté ◽  
Jorge Aubets ◽  
Josep Maria Jansat ◽  
Sonia Sentellas
Keyword(s):  
Mass Spectrometry ◽  
Liquid Chromatography ◽  
Ion Mobility Spectrometry ◽  
Ion Mobility ◽  
Biological Samples ◽  
Ion Mobility Mass Spectrometry ◽  
Exogenous Compounds ◽  
Analytical Separation

This paper aims to cover the main strategies based on ion mobility spectrometry (IMS) for the analysis of biological samples. The determination of endogenous and exogenous compounds in such samples is important for the understanding of the health status of individuals. For this reason, the development of new approaches that can be complementary to the ones already established (mainly based on liquid chromatography coupled to mass spectrometry) is welcomed. In this regard, ion mobility spectrometry has appeared in the analytical scenario as a powerful technique for the separation and characterization of compounds based on their mobility. IMS has been used in several areas taking advantage of its orthogonality with other analytical separation techniques, such as liquid chromatography, gas chromatography, capillary electrophoresis, or supercritical fluid chromatography. Bioanalysis is not one of the areas where IMS has been more extensively applied. However, over the last years, the interest in using this approach for the analysis of biological samples has clearly increased. This paper introduces the reader to the principles controlling the separation in IMS and reviews recent applications using this technique in the field of bioanalysis.

Construction and characterization of GCE/MWCNT/Au-NP as a new impedimetric and voltammetric sensor for determination of gemfibrozil in pharmaceutical and biological samples

2019 ◽  
Vol 5 (2) ◽  
pp. 025029
Author(s):  
Mansour Arab Chamjangali ◽  
Atiye Ahmadi Reskety ◽  
Nasser Goudarzi ◽  
Ghadamali Bagherian ◽  
Amir Hossein Momeni
Keyword(s):  
Biological Samples ◽  
Voltammetric Sensor

scholarly journals Spatially Resolved Characterization of Biogenic Manganese Oxide Production within a Bacterial Biofilm

2005 ◽  
Vol 71 (3) ◽  
pp. 1300-1310 ◽  
Author(s):  
Brandy Toner ◽  
Sirine Fakra ◽  
Mario Villalobos ◽  
Tony Warwick ◽  
Garrison Sposito
Keyword(s):  
Careful Consideration ◽  
Bacterial Biofilm ◽  
Bacterial Cells ◽  
X Ray ◽  
Spatially Resolved ◽  
Nexafs Spectroscopy ◽  
Promising Tool ◽  
Scanning Transmission ◽  
X Ray Absorption

ABSTRACT Pseudomonas putida strain MnB1, a biofilm-forming bacterial culture, was used as a model for the study of bacterial Mn oxidation in freshwater and soil environments. The oxidation of aqueous Mn+2 [Mn+2 (aq)] by P. putida was characterized by spatially and temporally resolving the oxidation state of Mn in the presence of a bacterial biofilm, using scanning transmission X-ray microscopy (STXM) combined with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy at the Mn L2,3 absorption edges. Subsamples were collected from growth flasks containing 0.1 and 1 mM total Mn at 16, 24, 36, and 48 h after inoculation. Immediately after collection, the unprocessed hydrated subsamples were imaged at a 40-nm resolution. Manganese NEXAFS spectra were extracted from X-ray energy sequences of STXM images (stacks) and fit with linear combinations of well-characterized reference spectra to obtain quantitative relative abundances of Mn(II), Mn(III), and Mn(IV). Careful consideration was given to uncertainty in the normalization of the reference spectra, choice of reference compounds, and chemical changes due to radiation damage. The STXM results confirm that Mn+2 (aq) was removed from solution by P. putida and was concentrated as Mn(III) and Mn(IV) immediately adjacent to the bacterial cells. The Mn precipitates were completely enveloped by bacterial biofilm material. The distribution of Mn oxidation states was spatially heterogeneous within and between the clusters of bacterial cells. Scanning transmission X-ray microscopy is a promising tool for advancing the study of hydrated interfaces between minerals and bacteria, particularly in cases where the structure of bacterial biofilms needs to be maintained.

Synthesis and Structural Characterization of Ferromagnetic Au/Co Nanoparticles

2014 ◽  
Vol 1708 ◽  
Author(s):  
Nabraj Bhattarai ◽  
Subarna Khanal ◽  
Daniel Bahena ◽  
Robert L. Whetten ◽  
Miguel Jose-Yacaman
Keyword(s):  
Quantum Interference ◽  
Magnetic Measurements ◽  
Ferromagnetic Behavior ◽  
Contrast Imaging ◽  
Uniform Size ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Co Nanoparticles ◽  
Z Contrast

ABSTRACTThe synthesis of bimetallic magnetic nanoparticles is very challenging because of the agglomeration and non-uniform size. In this paper, we present the synthesis of monodispersed 3-5 nm sized thiolated bimetallic alloyed Au/Co nanoparticles with decahedral and icosahedral shape, their characterization using Cs-corrected scanning transmission electron microscopy (STEM) and magnetic measurements using superconducting quantum interference device (SQUID) magnetometer. The Z-contrast imaging and energy dispersive X-ray spectroscopy (EDS) mapping showed an inhomogeneous alloying with minor segregation between Au and Co at nanoscale and the SQUID measurement exhibited the ferromagnetic behavior.

Sign in / Sign up

Export Citation Format

Share Document