Ultrashort laser pulses and ultrashort electron bunches generated in relativistic laser-plasma interaction

2006 ◽  
Vol 13 (5) ◽  
pp. 056706 ◽  
Author(s):  
J. Faure ◽  
Y. Glinec ◽  
G. Gallot ◽  
V. Malka
2012 ◽  
Vol 78 (4) ◽  
pp. 355-361 ◽  
Author(s):  
S. M. WIGGINS ◽  
M. P. REIJNDERS ◽  
S. ABUAZOUM ◽  
K. HART ◽  
G. VIEUX ◽  
...  

AbstractGas-filled capillary discharge waveguides are a commonly employed medium in laser–plasma interaction applications, such as the laser wakefield accelerator, because they can simultaneously guide high-power laser pulses while acting as the medium for acceleration. In this paper, the production of both straight and linearly tapered capillaries using a femtosecond laser micromachining technique is presented. A tapered capillary is shown to possess a smooth variation in diameter (from 305 μm to 183 μm) along its entire 40 mm length, which would lead to a longitudinal plasma density gradient, thereby dramatically improving the laser–plasma interaction efficiency in applications. Efficient guiding with up to 82% energy transmission of the fundamental Gaussian mode of a low intensity, 50 fs duration laser pulse is shown for both types of capillary waveguide.


1990 ◽  
Vol 8 (1-2) ◽  
pp. 153-171 ◽  
Author(s):  
A. A. Offenberger ◽  
J. Santiago ◽  
M. Fujita ◽  
R. Fedosejevs ◽  
W. Rozmus

Stimulated Brillouin and Raman scattering are of considerable interest because of their importance to basic nonlinear plasma physics phenomena and to laser-driven inertial confinement fusion. Induced scattering can be substantial for high intensity (I), long wavelength (λ) lasers because the instability growth rates depend exponentially on Jλ2, and also for short wavelength, long scalelength (L) laser/plasma interaction because of nearly homogeneous or large convective gain conditions. Experimental results from both KrF and CO2 laser/plasma interaction studies are presented to illustrate important wavelength dependent features of induced scattering such as the nature of the instability (absolute, convective), threshold, spectra, reflectivity and saturation effects. Backscattering characteristics have been measured for solid target plasmas (aluminum, gold) produced by KrF laser pulses focused to intensities <1014 W/cm2 and gas targets (hydrogen, oxygen) by CO2 laser pulses at intensities <1013 W/cm2. Collisional absorption dominates the KrF laser experiments, whereas particle heating and increased Landau damping dominate the CO2 laser experiments. Current theoretical work concerned with nonlinear effects in Langmuir wave localization, wave collapse and particle heating (generating characteristic high temperature electrons) is also presented.


2010 ◽  
Author(s):  
C. A. Cecchetti ◽  
S. Betti ◽  
A. Gamucci ◽  
A. Giulietti ◽  
D. Giulietti ◽  
...  

2006 ◽  
Vol 24 (3) ◽  
pp. 455-463 ◽  
Author(s):  
HEINRICH HORA

Stochastic pulsation of laser-plasma interaction in the range of a few to dozens of picoseconds, due to standing wave produced density ripples, needs more attention than in the past, in view of the recent developments. This is important if nanosecond laser pulses produce a pre-compression that is a thousand times the solid state density of DT for fast ignition as well as for treatment of ps laser interaction. The following is an updated summary of these properties where the laser beam smoothing is essential. The use of smoothing is not only an empirical game with experiments for improving the interaction, but it is necessary to be aware of the mechanisms involved for understanding how the pulsation is overcome, and conclusions can be derived systematically for further improvements and control of the phenomena.


Author(s):  
L. Martín ◽  
J. Benlliure ◽  
D. Cortina-Gil ◽  
J. Peñas ◽  
C. Ruiz

We report the development of a stable high-average power X-ray source generated by the interaction of ultrashort laser pulses (35 fs, 1 mJ, 1 kHz) with a solid target in air. The achieved source stability, which is essential for the applications foreseen for these laser-driven plasma accelerators, is due to the combination of precise positioning of the target on focus and the development of a fast rotating target system able to ensure the refreshment of the material at every shot while minimizing positioning errors with respect to the focal spot. This vacuum-free laser-plasma X-ray source provides an average dose rate of 1.5 Sv/h at 30 cm and a repeatability better than 93% during more than 36 min of continuous operation per target.


Sign in / Sign up

Export Citation Format

Share Document