Noise due to extreme bubble deformation near inception of tip vortex cavitation

2004 ◽  
Vol 16 (7) ◽  
pp. 2411-2418 ◽  
Author(s):  
Jin-Keun Choi ◽  
Georges L. Chahine
Keyword(s):  
Tip Vortex ◽  
Tip Vortex Cavitation ◽  
Bubble Deformation

Noise Due to Extreme Bubble Deformation Near Inception of Tip Vortex Cavitation

2003 ◽  
Author(s):  
Jin-Keun Choi ◽  
Georges L. Chahine
Keyword(s):  
Flow Field ◽  
High Speed ◽  
Vortex Flow ◽  
Jet Noise ◽  
Video Camera ◽  
Tip Vortex ◽  
Bubble Behavior ◽  
Tip Vortex Cavitation ◽  
Cavitation Inception ◽  
Bubble Deformation

A study on the tip vortex cavitation inception based on extreme bubble deformation and jet noise is presented. First, two preliminary experiments are performed to provide a correlation between the numerically computed splitting/jet noise and the measured noise. The bubble behavior and pressure signal predicted by the axisymmetric method are compared with those recorded simultaneously by using a high-speed video camera and hydrophone. Then, numerical studies on the bubble behavior in the tip vortex flow field are conducted. The tip vortex flow near a hydrofoil is provided by a viscous flow computation, and the bubble behavior is simulated by an axisymmetric boundary element method based on the provided vortex flow field. The characteristics of the bubble behavior and jet noise over a range of cavitation numbers are investigated. The effect of initial bubble nucleus size and the Reynolds number effect of the tip vortex flow on the tip vortex cavitation inception, the bubble behavior including its splitting, and jet noise are also discussed.

Application of a Boundary Element Method in the Prediction of Unsteady Blade Sheet and Developed Tip Vortex Cavitation on Marine Propellers

2004 ◽  
Vol 48 (01) ◽  
pp. 15-30
Author(s):  
Hanseong Lee ◽  
Spyros A. Kinnas
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Pressure Fluctuations ◽  
Ship Hull ◽  
Tip Vortex ◽  
Tip Vortex Cavitation ◽  
Marine Propellers ◽  
Sheet Cavitation ◽  
Numerical Predictions ◽  
Element Method

Most marine propellers operate in nonaxisymmetric inflows, and thus their blades are often subject to an unsteady flow field. In recent years, due to increasing demands for faster and larger displacement ships, the presence of blade sheet and tip vortex cavitation has become very common. Developed tip vortex cavitation, which often appears together with blade sheet cavitation, is known to be one of the main sources of propeller-induced pressure fluctuations on the ship hull. The prediction of developed tip vortex cavity as well as blade sheet cavity is thus quite important in the assessment of the propeller performance and the corresponding pressure fluctuations on the ship hull. A boundary element method is employed to model the fully unsteady blade sheet (partial or supercavitating) and developed tip vortex cavitation on propeller blades. The extent and size of the cavity is determined by satisfying both the dynamic and the kinematic boundary conditions on the cavity surface. The numerical behavior of the method is investigated for a two-dimensional tip vortex cavity, a three-dimensional hydrofoil, and a marine propeller subjected to nonaxisymmetric inflow. Comparisons of numerical predictions with experimental measurements are presented.

Observation and Scaling of Tip Vortex Cavitation on Elliptical Hydrofoils

2011 ◽  
Author(s):  
Shigeki Nagaya ◽  
Risa Kimoto ◽  
Kenji Naganuma ◽  
Takayuki Mori
Keyword(s):  
Water Quality ◽  
Reynolds Number ◽  
High Speed ◽  
Tip Vortex ◽  
Video Observation ◽  
Tip Vortex Cavitation ◽  
Air Content ◽  
Sheet Cavitation ◽  
High Speed Video ◽  
Systems Research

Experimental study on tip vortex cavitation (TVC) was carried out for elliptical hydrofoils with various chord lengths. The purpose of the experiment was to clarify the influences of Reynolds number and water quality on tip vortex cavitation. Experiments were made in a large cavitation tunnel of the Naval Systems Research Center, TRDI/Ministry of Defense Japan. The elliptical hydrofoils tested were NACA 0012 cross section with chord lengths of 500mm, 250mm and 50mm. Reynolds number based on hydrofoil chord length was 2×105 < ReC < 7.4×106. Water quality of the tunnel was characterized by air content and nuclei distribution. Air content of the tunnel was varied between 30% and 80%. Nuclei distribution was measured by a cavitation susceptibility meter (CSM) with center-body venturi. Cavitation inception was determined from high speed video observation. A standard formula, (σL/σS) = (ReL/ReS)n, was applied for the scaling. In the present study, exponent of the scaling law n was found to be 0.2 < n < 0.4. High speed video observation showed that the process of the TVC inception strongly depends on water quality. In the experiments, unsteady behaviors of TVC were also investigated. Strong interactions between sheet cavitation and TVC were observed.

scholarly journals Numerical Investigation of Tip-Vortex Cavitation Noise of an Elliptic Wing Using Coupled Eulerian-Lagrangian Approaches

2020 ◽  
Vol 10 (17) ◽  
pp. 5897 ◽  
Author(s):  
Garam Ku ◽  
Cheolung Cheong ◽  
Hanshin Seol
Keyword(s):  
Flow Field ◽  
Numerical Method ◽  
Vortex Flow ◽  
Acoustic Pressure ◽  
Tip Vortex ◽  
Experimental Result ◽  
Cavitation Noise ◽  
Navier Stokes Equation ◽  
Tip Vortex Cavitation ◽  
Cavitation Inception

In this study, a numerical methodology is developed to investigate the tip-vortex cavitation of NACA16-020 wings and their flow noise. The numerical method consists of a sequential one-way coupled application of Eulerian and Lagrangian approaches. First, the Eulerian method based on Reynolds-averaged Navier–Stokes equation is applied to predict the single-phase flow field around the wing, with particular emphasis on capturing high-resolution tip-vortex flow structures. Subsequently, the tip-vortex flow field is regenerated by applying the Scully vortex model. Secondly, the Lagrangian approach is applied to predict the tip-vortex cavitation inception and noise of the wing. The initial nuclei are distributed upstream of the wing. The subsequent time-varying size and position of each nucleus are traced by solving spherically symmetric bubble dynamics equations for the nuclei in combination with the flow field predicted from the Eulerian approach. The acoustic pressure at the observer position is computed by modelling each bubble as a point source. The numerical results of the acoustic pressure spectrum are best matched to the measured results when the nuclei number density of freshwater is used. Finally, the current numerical method is applied to the flows of various cavitation numbers. The results reveal that the cavitation inception determined by the predicted acoustic pressure spectrum well matched the experimental result.

Block-sparse compressive localization for incipient tip vortex cavitation noise

2019 ◽  
Vol 145 (3) ◽  
pp. 1936-1936
Author(s):  
MinSeuk Park ◽  
Woojae Seong ◽  
Youngmin Choo ◽  
Yongsung Park
Keyword(s):  
Tip Vortex ◽  
Cavitation Noise ◽  
Tip Vortex Cavitation

Suppressing tip vortex cavitation by winglets

2019 ◽  
Vol 60 (11) ◽  
Author(s):  
Ali Amini ◽  
Martino Reclari ◽  
Takeshi Sano ◽  
Masamichi Iino ◽  
Mohamed Farhat
Keyword(s):  
Tip Vortex ◽  
Tip Vortex Cavitation
Sign in / Sign up

Export Citation Format

Share Document