Arc‐Image Stagnation‐Flow Reactor for Measuring Kinetics of Gas‐Solid Reactions from 2000 to 3000°K

1966 ◽  
Vol 37 (10) ◽  
pp. 1359-1363 ◽  
Author(s):  
Irwin R. Ladd ◽  
Harold W. Wilson
Keyword(s):  
Flow Reactor ◽  
Stagnation Flow ◽  
Kinetics Of

Kinetics of the catalytic hydrodesulphurization reaction system; hydrogenolysis of thiophene

1980 ◽  
Vol 45 (10) ◽  
pp. 2728-2741 ◽  
Author(s):  
Pavel Fott ◽  
Petr Schneider
Keyword(s):  
Atmospheric Pressure ◽  
Active Sites ◽  
Flow Reactor ◽  
Kinetic Equations ◽  
Reaction System ◽  
Reaction Products ◽  
Molybdenum Catalyst ◽  
Cobalt Molybdenum Catalyst ◽  
Kinetics Of ◽  
Reaction Schemes

Kinetics have been studied of the reaction system taking place during the reaction of thiophene on the cobalt-molybdenum catalyst in a gradientless circulation flow reactor at 360 °C and atmospheric pressure. Butane has been found present in a small amount in the reaction products even at very low conversion. In view of this, consecutive and parallel-consecutive (triangular) reaction schemes have been proposed. In the former scheme the appearance of butane is accounted for by rate of desorption of butene being comparable with the rate of its hydrogenation. According to the latter scheme part of the butane originates from thiophene via a different route than through hydrogenation of butene. Analysis of the kinetic data has revealed that the reaction of thiophene should be considered to take place on other active sites than that of butene. Kinetic equations derived on this assumption for the consecutive and the triangular reaction schemes correlate experimental data with acceptable accuracy.

Kinetics of CH2OO and syn-CH3CHOO Reaction with Acrolein

2021 ◽  
Author(s):  
Xiaohu Zhou ◽  
YANG CHEN ◽  
Yiqiang Liu ◽  
Xinyong Li ◽  
Wenrui Dong ◽  
...  
Keyword(s):  
Flash Photolysis ◽  
Flow Reactor ◽  
Unsaturated Aldehyde ◽  
Kinetics Of

The kinetics for the reactions of CH2OO and syn-CH3CHOO with acrolein, a typical unsaturated aldehyde in the atmosphere, were studied in a flash photolysis flow reactor by using the OH...

New Insights into the Kinetics of the Gas-Phase Oxidation of Hexafluoropropene

2016 ◽  
Vol 41 (4) ◽  
pp. 418-427 ◽  
Author(s):  
David Lokhat ◽  
Maciej Starzak ◽  
Deresh Ramjugernath
Keyword(s):  
Gas Phase ◽  
Oxidation Process ◽  
Flow Reactor ◽  
Packed Column ◽  
Phase Reaction ◽  
Analytical Technique ◽  
Tubular Flow Reactor ◽  
Gas Phase Oxidation ◽  
Tubular Flow ◽  
Kinetics Of

The gas-phase reaction of hexafluoropropene and molecular oxygen was investigated in a tubular flow reactor at 450 kPa and within a temperature range of 463–493 K using HFP/O2 mixtures containing 20–67% HFP on a molar basis. Capillary and packed column chromatography served as the main analytical technique. The reaction yielded HFPO, COF2, CF3COF, C2F4 and c-C3F6 as gas-phase products. High molecular weight oligomers were also formed. The oligomers were found to have a polyoxadifluoromethylene structure according to elemental and 19F NMR analysis. At 493 K HFP is proposed to undergo oxygen-mediated decomposition to difluorocarbene radicals, yielding greater quantities of difluorocarbene recombination products. Kinetic parameters for a revised model of the oxidation process were identified through least squares analysis of the experimental data.

scholarly journals Desorption and re-adsorption of PAHS on aircraft soot surface

2020 ◽  
Vol 42 (4) ◽  
Author(s):  
Nguyen Mai Lan
Keyword(s):  
High Performance ◽  
Flow Reactor ◽  
Activation Energies ◽  
Binding Energies ◽  
Desorption Kinetics ◽  
Chemical Transformations ◽  
Polycyclic Aromatic ◽  
Kinetics Of Degradation ◽  
Kinetics Of ◽  
Pyrex Tube

Polycyclic Aromatic Hydrocarbons (PAHs) in aircraft soot are capable to distribute in the gas phase and particulate phase in chemical transformations in the atmosphere. The desorption of PAHs from the soot surface is a preliminary step in the study of the reactivity of particulate PAHs. The desorption kinetics of PAHs are measured from soot samples to determine desorption rate constants for different PAHs as a function of temperature and the binding energies between PAHs and soot. The kinetics of degradation of particulate PAHs were studied in the flow reactor. The soot samples previously deposited on a Pyrex tube are introduced into the reactor along its axis and the concentrations of PAHs adsorbed on soot are determined by the High-Performance Liquid Chromatography (HPLC) as a function of the desorption time. The results show a correlation between the size of PAHs and the thermodynamics of desorption: with the PAHs have the same number of carbon atoms, their energies of desorption are very similar and increase with this number. The activation energies EA and the number of carbon atoms in PAHs have a linear correlation. It is consistent with the additivity of the laws Van der Waals. The similarity between the activation energies of desorption of PAHs and the corresponding sublimation enthalpies is consistent with the similarity between the graphitic structure of soot and the structure of PAHs.

Flow Structure and Heat Transfer in Stagnation Flow CVD Reactor

2010 ◽  
Author(s):  
Nasir Memon ◽  
Yogesh Jaluria
Keyword(s):  
Heat Transfer ◽  
Flow Structure ◽  
Atmospheric Pressure ◽  
Gas Flow ◽  
Flow Reactor ◽  
Chemical Vapor ◽  
Design Parameters ◽  
Stagnation Flow ◽  
Inlet Length ◽  
The Impact

An experimental study is undertaken to investigate the flow structure and heat transfer in a stagnation flow Chemical Vapor Deposition (CVD) reactor at atmospheric pressure. It is critical to develop models that predict flow patterns in such a reactor to achieve uniform deposition across the substrate. Free convection can negatively affect the gas flow as cold inlet gas impinges on the heated substrate, leading to vortices and disturbances in the normal flow path. This experimental research will be used to understand the buoyancy-induced and momentum-driven flow structure encountered in an impinging jet CVD reactor. Investigations are conducted for various operating and design parameters. A modified stagnation flow reactor is built where the height between the inlet and substrate is reduced when compared to a prototypical stagnation flow reactor. By operating such a reactor at certain Reynolds and Grashof numbers it is feasible to sustain smooth and vortex free flow at atmospheric pressure. The modified stagnation flow reactor is compared to other stagnation flow geometries with either a varied inlet length or varied heights between the inlet and substrate. Comparisons are made to understand the impact of such geometric changes on the flow structure and the thermal boundary layer. In addition, heat transfer correlations are obtained for the substrate temperature. Overall, the results obtained provide guidelines for curbing the effects of buoyancy and for improving the flow field to obtain greater film uniformity when operating a stagnation flow CVD reactor at atmospheric pressure.

Sign in / Sign up

Export Citation Format

Share Document