scholarly journals Erratum: Electrical Response of Materials Containing Space Charge with Discharge at the Electrodes

1972 ◽  
Vol 56 (1) ◽  
pp. 681-681 ◽  
Author(s):  
J. Ross Macdonald
Keyword(s):  
Space Charge ◽  
Electrical Response

Electrical response of materials with recombining space charge

1977 ◽  
Vol 10 (9) ◽  
pp. 1459-1471 ◽  
Author(s):  
J R Macdonald ◽  
D R Franceschetti ◽  
R Meaudre
Keyword(s):  
Space Charge ◽  
Electrical Response

Use of fractals to describe microstructures of porous thick-film platinum electrodes

1992 ◽  
Vol 50 (1) ◽  
pp. 314-315
Author(s):  
Steven D. Toteda
Keyword(s):  
Fractal Dimension ◽  
Power Plants ◽  
Electrical Response ◽  
Cubic Phase ◽  
Platinum Electrodes ◽  
Fine Grained ◽  
Impedance Response ◽  
Platinum Particles ◽  
Energy Surfaces ◽  
Highly Porous

Zirconia oxygen sensors, in such applications as power plants and automobiles, generally utilize platinum electrodes for the catalytic reaction of dissociating O2 at the surface. The microstructure of the platinum electrode defines the resulting electrical response. The electrode must be porous enough to allow the oxygen to reach the zirconia surface while still remaining electrically continuous. At low sintering temperatures, the platinum is highly porous and fine grained. The platinum particles sinter together as the firing temperatures are increased. As the sintering temperatures are raised even further, the surface of the platinum begins to facet with lower energy surfaces. These microstructural changes can be seen in Figures 1 and 2, but the goal of the work is to characterize the microstructure by its fractal dimension and then relate the fractal dimension to the electrical response. The sensors were fabricated from zirconia powder stabilized in the cubic phase with 8 mol% percent yttria. Each substrate was sintered for 14 hours at 1200°C. The resulting zirconia pellets, 13mm in diameter and 2mm in thickness, were roughly 97 to 98 percent of theoretical density. The Engelhard #6082 platinum paste was applied to the zirconia disks after they were mechanically polished ( diamond). The electrodes were then sintered at temperatures ranging from 600°C to 1000°C. Each sensor was tested to determine the impedance response from 1Hz to 5,000Hz. These frequencies correspond to the electrode at the test temperature of 600°C.

Electron holography of interfaces in electroceramics

1993 ◽  
Vol 51 ◽  
pp. 1088-1089
Author(s):  
Vinayak P. Dravid ◽  
V. Ravikumar ◽  
Richard Plass
Keyword(s):  
Space Charge ◽  
Direct Evidence ◽  
Materials Science ◽  
Theoretical Work ◽  
Electron Holography ◽  
Resolution Limit ◽  
Interference Phenomenon ◽  
X Ray ◽  
Electron Sources ◽  
Science Community

With the advent of coherent electron sources with cold field emission guns (cFEGs), it has become possible to utilize the coherent interference phenomenon and perform “practical” electron holography. Historically, holography was envisioned to extent the resolution limit by compensating coherent aberrations. Indeed such work has been done with reasonable success in a few laboratories around the world. However, it is the ability of electron holography to map electrical and magnetic fields which has caught considerable attention of materials science community.There has been considerable theoretical work on formation of space charge on surfaces and internal interfaces. In particular, formation and nature of space charge have important implications for the performance of numerous electroceramics which derive their useful properties from electrically active grain boundaries. Bonnell and coworkers, in their elegant STM experiments provided the direct evidence for GB space charge and its sign, while Chiang et al. used the indirect but powerful technique of x-ray microchemical profiling across GBs to infer the nature of space charge.

Dynamic electrical response of YBaCuO thin films as a function of microstructure in view of applications to agile electronics

2001 ◽  
Vol 11 (PR11) ◽  
pp. Pr11-121-Pr11-125
Author(s):  
F. Abbott ◽  
A. F. Dégardin ◽  
A. De Luca ◽  
O. Schneegans ◽  
É. Caristan ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Response
Sign in / Sign up

Export Citation Format

Share Document