scholarly journals Nanostructural and mechanical properties of nanocomposite nc-TiC/a-C:H films deposited by reactive unbalanced magnetron sputtering

2004 ◽  
Vol 95 (8) ◽  
pp. 4327-4334 ◽  
Author(s):  
T. Zehnder ◽  
P. Schwaller ◽  
F. Munnik ◽  
S. Mikhailov ◽  
J. Patscheider
Keyword(s):  
Mechanical Properties ◽  
Magnetron Sputtering ◽  
Unbalanced Magnetron Sputtering ◽  
Unbalanced Magnetron

Mechanical and Tribological Properties of W(100-x)%Cx% Coatings Deposited by DC Magnetron Sputtering

2015 ◽  
Vol 642 ◽  
pp. 184-189
Author(s):  
Yan Liang Su ◽  
Yueh Feng Lin
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Magnetron Sputtering ◽  
X Ray Diffraction ◽  
Mechanical And Tribological Properties ◽  
Unbalanced Magnetron Sputtering ◽  
Unbalanced Magnetron ◽  
Pin On Disc ◽  
Dry Conditions ◽  
Coating Microstructure

W(100-x)%Cx% coatings with different tungsten and carbon contents were deposited by unbalanced magnetron sputtering. The microstructures and mechanical properties of the W(100-x)%C x% coatings was characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), nanoindentation and adhesion testing techniques. The tribological performance of the coatings was investigated using a pin-on-disc trobometer under dry conditions. Experimental results indicated that coating microstructure, mechanical properties and wear resistance varied according to the tungsten and carbon contents of the coatings. The W72%C28% coating had the highest hardness/elastic modulus (H/E) ratio. In the ball-on-disc wear tests, it was found that the W72%C28% coating exhibited the best wear resistance.

The Structure and Mechanical Properties of Ti-Si-B Coatings Deposited by DC and Pulsed-DC Unbalanced Magnetron Sputtering

2007 ◽  
Vol 4 (S1) ◽  
pp. S687-S692 ◽  
Author(s):  
Martynas Audronis ◽  
Adrian Leyland ◽  
Allan Matthews ◽  
Fillip V. Kiryukhantsev-Korneev ◽  
Dmitry V. Shtansky ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Magnetron Sputtering ◽  
Unbalanced Magnetron Sputtering ◽  
Pulsed Dc ◽  
Unbalanced Magnetron

Effect of Temperature on Structure and Mechanical Properties of CrN Coatings Deposited by Closed Field Unbalanced Magnetron Sputtering

2013 ◽  
Vol 591 ◽  
pp. 190-193
Author(s):  
Hao Zhang ◽  
Shu Wang Duo ◽  
Xiang Min Xu ◽  
Ting Zhi Liu
Keyword(s):  
Mechanical Properties ◽  
Magnetron Sputtering ◽  
Grain Shape ◽  
Effect Of Temperature ◽  
Closed Field ◽  
Columnar Crystal ◽  
Crn Coating ◽  
Unbalanced Magnetron Sputtering ◽  
Unbalanced Magnetron ◽  
Crn Coatings

CrN coatings were fabricated by Closed Filed Unbalanced Magnetron Sputtering (CFUMS). The effect of substrate temperature (TS) on phase components, morphologies and mechanical properties of CrN coatings were studied. The results show that the phase in coatings, which has little to do with TS, was the coexistence of Cr, Cr2N and CrN. The grain shape of the columnar crystal CrN coating was the coexistence of pyramidal and plane topography. The hardness and adhension of CrN coating first increased with the rise of temperature, then decreased when the values of both them were constant ones. It has the highest hardness and bonding strength simultaneously at 300°C.

Sign in / Sign up

Export Citation Format

Share Document