Translational and rotational dynamics of water in mesoporous silica materials: MCM-41-S and MCM-48-S

2003 ◽  
Vol 119 (7) ◽  
pp. 3963-3971 ◽  
Author(s):  
Antonio Faraone ◽  
Li Liu ◽  
Chung-Yuan Mou ◽  
Pei-Chun Shih ◽  
John R. D. Copley ◽  
...  
Keyword(s):  
Mesoporous Silica ◽  
Rotational Dynamics ◽  
Silica Materials ◽  
Mesoporous Silica Materials ◽  
Mcm 41

Synthesis of Mesoporous Silica and its Adsorption Properties for Chloride Ions

2019 ◽  
Vol 956 ◽  
pp. 282-293
Author(s):  
Guo Jun Ke ◽  
Tian Shi Liu ◽  
Peng Fei Yang ◽  
Xiao Lin Tang
Keyword(s):  
Mesoporous Silica ◽  
Specific Surface ◽  
Adsorption Capacity ◽  
Chloride Ion ◽  
Chloride Ions ◽  
Adsorption Properties ◽  
Adsorption Effect ◽  
Silica Materials ◽  
Mesoporous Silica Materials ◽  
Mcm 41

A series of mesoporous silica materials (SBA-15, MCM-41, KIT-6) with different pore structures and properties were synthesized and characterized by means of small angle X-ray scattering, transmission electron microscopy, infrared spectroscopy and nitrogen adsorption-desorption. The adsorption properties of three mesoporous silica materials for chlorine ions in aqueous solution were investigated. The results show that SBA-15, MCM-41 with two-dimensional hexagonal structure has a better adsorption effect on chloride ion than KIT-6 With cubic core structure, and MCM-41 with larger specific surface area and smaller pore size has better adsorption effect on chloride ion than on SBA-15. The specific surface area of MCM-41 is 1036 m2/g, and the The adsorption kinetics accords with the pseudo-second-order kinetic model, and the adsorption isotherm is more consistent with the Langmuir isotherm model. The optimum operating conditions for MCM-41 to adsorb chloride ions are as follows: temperature 55 °C, pH 6, adsorption time 2 h, Cl- concentration 0.01 mol/L (584 mg/L) and adsorbent concentration 1.0 g/L. Under these conditions, the adsorption capacity of MCM-41 to chloride ions is greatly enhanced, and the maximum adsorption capacity is 188.18 mg/g.

scholarly journals Ordered Mesoporous Silica Materials for Protein Adsorption

2010 ◽  
Vol 636-637 ◽  
pp. 54-59 ◽  
Author(s):  
F. Sezões ◽  
Manuela M.L. Ribeiro Carrott ◽  
Paulo A.M. Mourão ◽  
P.A. Russo ◽  
Peter J.M. Carrott
Keyword(s):  
Mesoporous Silica ◽  
Protein Adsorption ◽  
Structural Characteristics ◽  
Structural Features ◽  
Ordered Mesoporous Silica ◽  
Ordered Mesoporous ◽  
Pore Size Distributions ◽  
Silica Materials ◽  
Mesoporous Silica Materials ◽  
Mcm 41

Lysozyme and BSA were used, as model proteins of considerably different dimensions, in order to evaluate the influence of the distinct pore structural characteristics of three types of ordered mesoporous silica materials (MCF, SBA-15 and MCM-41) on protein adsorption. Characterisation by X ray diffraction and nitrogen adsorption at 77K revealed the typical pore structural features of each type of material. The maximum of the pore size distributions indicated that the width of the windows of MCF (2) (mesitylene/P123 of 2) was larger than the pore diameter of the unidirectional tubular pores of SBA-15. All the materials presented similar small external surface areas but high pore volumes, with that of MCF (2) being the highest. The adsorption of lysozyme at pH=8 increased in the order MCM-41<< SBA-15< MCF (2), and the uptakes were well above those of BSA at pH=5. Although BSA is not completely excluded from the mesopores of SBA-15 and MCF (2), as happens with MCM-41, the adsorption occurs to a very limited extent. The overall behaviour of these SBA-15 and MCF (2) samples was not significantly different and both revealed potential for the separation of these proteins.

Processing of mesoporous silica materials (MCM-41) from coal fly ash

2007 ◽  
Vol 186 (1-3) ◽  
pp. 8-13 ◽  
Author(s):  
Halina Misran ◽  
Ramesh Singh ◽  
Shahida Begum ◽  
Mohd Ambar Yarmo
Keyword(s):  
Fly Ash ◽  
Mesoporous Silica ◽  
Coal Fly Ash ◽  
Silica Materials ◽  
Mesoporous Silica Materials ◽  
Mcm 41

Photometathesis activity and thermal stability of two types of mesoporous silica materials, FSM-16 and MCM-41

2000 ◽  
Vol 2 (22) ◽  
pp. 5293-5297 ◽  
Author(s):  
Yoshitaka Inaki ◽  
Hisao Yoshida ◽  
Koichi Kimura ◽  
Shinji Inagaki ◽  
Yoshiaki Fukushima ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Mesoporous Silica ◽  
Silica Materials ◽  
Mesoporous Silica Materials ◽  
Thermal Stability Of ◽  
Mcm 41

scholarly journals Simple Synthesis and Characterization of Hexagonal and Ordered Al–MCM–41 from Natural Perlite

Minerals ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 264 ◽  
Author(s):  
Hongyun Chen ◽  
Siyao Fu ◽  
Liangjie Fu ◽  
Huaming Yang ◽  
Deliang Chen
Keyword(s):  
Mesoporous Silica ◽  
Bet Surface Area ◽  
Ammonium Bromide ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemical Structures ◽  
Ordered Mesoporous ◽  
Silica Materials ◽  
Mesoporous Silica Materials ◽  
Mcm 41

Silica reagents are expensive and toxic for use in the synthesis of mesoporous silica materials. It is imperative to take an interest in green silicon sources. In this paper, we report the synthesis of hexagonal and ordered aluminum-containing mesoporous silica materials (Al–MCM–41) from natural perlite mineral without addition of silica or aluminum reagents. A pretreatment process involving acid leaching, alkali leaching, and strongly acidic cation exchange resins treatment was critical to obtain silicon and aluminum sources from natural perlite mineral. The Al–MCM–41 material was synthesized via a hydrothermal reaction with hexadecyl trimethyl ammonium bromide (CTAB) as the template and subsequent calcination. The resulting mesophase had a hexagonal and ordered mesoporous structure, confirmed by small-angle X-ray diffraction (SAXRD) and transmission electron microscopy (TEM). Al–MCM–41 material had a high Brunauer–Emmet–Teller (BET) surface area of 1024 m2/g, pore volume of 0.72 cm3/g and an average pore diameter of 2.8 nm with a pore size distribution centered at 2.5 nm. The thermal behavior of the as-synthesized samples during calcination was investigated by thermogravimetry (TG) and differential thermogravimetry (DTG) analysis. The Al–MCM–41 material showed a negative surface charge in aqueous solution with the pH value ranging from 2 to 13. The variations of chemical structures from natural perlite to Al–MCM–41 were traced by wide-angle X-ray diffraction (WAXRD) and Fourier-transform infrared spectroscopy (FTIR). A proposed mechanism for the synthesis of hexagonal and ordered mesoporous silica materials from natural perlite is discussed.

Mesosilica materials and organic pollutant adsorption: part A removal from air

2014 ◽  
Vol 43 (15) ◽  
pp. 5163-5172 ◽  
Author(s):  
L. T. Gibson
Keyword(s):  
Mesoporous Silica ◽  
Organic Pollutants ◽  
Organic Pollutant ◽  
Vapour Phase ◽  
Silica Materials ◽  
Mesoporous Silica Materials ◽  
Mcm 41

This tutorial review focuses on the application of mesoporous silica materials, primarily MCM-41 and SBA-15, for the removal of organic pollutants in the vapour phase.

Sign in / Sign up

Export Citation Format

Share Document