ARIES nondestructive assay system operation and performance

2000 ◽  
Author(s):  
Teresa L. Cremers
Keyword(s):  
Assay System ◽  
System Operation ◽  
Nondestructive Assay ◽  
And Performance

scholarly journals Influence of system operation on the design and performance of a direct ground-coupled cooling system

2020 ◽  
pp. 110709
Author(s):  
Taha Arghand ◽  
Saqib Javed ◽  
Anders Trüschel ◽  
Jan-Olof Dalenbäck
Keyword(s):  
Cooling System ◽  
System Operation ◽  
And Performance

A 252Cf based nondestructive assay system for fissile material

1978 ◽  
Vol 152 (2-3) ◽  
pp. 549-557 ◽  
Author(s):  
Howard O. Menlove ◽  
Thomas W. Crane
Keyword(s):  
Assay System ◽  
Fissile Material ◽  
Nondestructive Assay

Compared Thermal Modeling of Anode- and Electrolyte-Supported SOFC-Gas Turbine Hybrid Systems

2020 ◽  
Vol 18 (1) ◽  
Author(s):  
Abdulrazzak Akroot ◽  
Lutfu Namli ◽  
Hasan Ozcan
Keyword(s):  
Fuel Cell ◽  
Hybrid Systems ◽  
Hybrid System ◽  
Operating Temperature ◽  
Power Production ◽  
Solid Oxide ◽  
System Model ◽  
Oxide Fuel ◽  
System Operation ◽  
And Performance

Abstract In this study, two solid oxide fuel cell (SOFC) hybrid systems (anode-supported model (ASM) and electrolyte-supported model (ESM)) is developed in matlab® and compared. The hybrid system model is considered to investigate the impacts of various operating parameters such as SOFC operating temperature and steam/carbon ratio on power production and performance of the hybrid system where it is projected that results can be utilized as guidelines for optimal hybrid system operation. According to the findings, a maximum 695 kW power is produced at 750 °C operating temperature for the anode-supported model, whereas 627 kW power is produced at 1000 °C for the electrolyte-supported model. The highest electrical efficiencies for the anode-supported model and the electrolyte-supported model are 64.6% and 58.3%, respectively. Besides, the lower value of the steam to carbon ratio is favorable for increased power output from the fuel cell and consequently a high SOFC efficiency.

Quality Control, Quality Assurance, and Business Continuity Plan in PACS

2010 ◽  
pp. 123-138
Author(s):  
Carrison K.S. Tong ◽  
Eric T.T. Wong
Keyword(s):  
Quality Control ◽  
Quality Assurance ◽  
Real World ◽  
Business Continuity ◽  
System Operation ◽  
Critical Part ◽  
And Performance ◽  
The Impact ◽  
Avoidable Risk ◽  
Pacs System

As PACS gains widespread use, the importance of Quality Control (QC), Quality Assurance (QA), and Business Continuity Plan (BCP) in PACS is rising. The purpose of QC/QA is to measure the quality and performance of a PACS for minimizing the chance of getting any avoidable risk. However, in the real world, there is still some risk in any complicated system. Therefore, BCP is used to reduce the impact and downtime of hospital PACS system operation due to changes or failures in the company operation procedure. The purpose of BCP is to make sure that the critical part of PACS system operation is not affected by critical failure or disaster.

An Automated Nondestructive Assay System

1977 ◽  
Vol 24 (1) ◽  
pp. 621-623
Author(s):  
John F. Lemming ◽  
John H. Birden ◽  
Francis X. Haas ◽  
Allen R. Campbell ◽  
Walter W. Rodenburg
Keyword(s):  
Assay System ◽  
Nondestructive Assay
Sign in / Sign up

Export Citation Format

Share Document