High efficiency and fast modulation of Er‐doped light emitting Si diodes

1996 ◽  
Vol 69 (14) ◽  
pp. 2077-2079 ◽  
Author(s):  
S. Coffa ◽  
G. Franzò ◽  
F. Priolo
Keyword(s):  
High Efficiency ◽  
Light Emitting ◽  
Er Doped

Impact Excitation And Auger Quenching Processes In Er Doped Light Emitting Si Devices

1997 ◽  
Vol 486 ◽  
Author(s):  
G. Franzo' ◽  
F. Priolo ◽  
S. Coffa
Keyword(s):  
High Efficiency ◽  
Depletion Region ◽  
Light Signal ◽  
Impact Excitation ◽  
Light Emitting ◽  
Free Carriers ◽  
Heavily Doped ◽  
Excitation Processes ◽  
Er Doped ◽  
Incorporation Method

AbstractA detailed investigation of the Auger non radiative de-excitation processes, which compete with the radiative emission of Er in Si, will be presented. This process, in which the energy released by the Er de-excitation is transferred to free carriers, is demonstrated to be extremely efficient and characterized by an Auger coefficient CA˜4.4×l0−13 cm3/s. This Auger process and an efficient incorporation method have been used to improve the performances of Er implanted light emitting diodes. It will be shown that by exciting Er within the depletion region of reverse biased p+-n+ Si diodes in the breakdown regime, it is possible to avoid Auger quenching and to achieve high efficiency. Moreover, at the switch off of the diode, when the depletion region shrinks, the excited Er ions become suddenly embedded within the neutral heavily doped region. In this region Auger de-excitation with free carriers sets in allowing to modulate the light signal at frequencies as high as a few MHz.

High-efficiency, long-lifetime deep-blue organic light-emitting diodes

2021 ◽  
Vol 15 (3) ◽  
pp. 208-215 ◽  
Author(s):  
Soon Ok Jeon ◽  
Kyung Hyung Lee ◽  
Jong Soo Kim ◽  
Soo-Ghang Ihn ◽  
Yeon Sook Chung ◽  
...  
Keyword(s):  
High Efficiency ◽  
Light Emitting Diodes ◽  
Organic Light Emitting Diodes ◽  
Light Emitting ◽  
Deep Blue ◽  
Organic Light ◽  
Long Lifetime

scholarly journals High efficiency blue organic light-emitting diodes with below-bandgap electroluminescence

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Maria Vasilopoulou ◽  
Abd. Rashid bin Mohd Yusoff ◽  
Matyas Daboczi ◽  
Julio Conforto ◽  
Anderson Emanuel Ximim Gavim ◽  
...  
Keyword(s):  
High Efficiency ◽  
Light Emitting Diodes ◽  
High Mobility ◽  
Organic Light Emitting Diodes ◽  
Triplet Energy ◽  
Material Interface ◽  
Light Emitting ◽  
Thermally Activated ◽  
Organic Light ◽  
Hole Transporting

AbstractBlue organic light-emitting diodes require high triplet interlayer materials, which induce large energetic barriers at the interfaces resulting in high device voltages and reduced efficiencies. Here, we alleviate this issue by designing a low triplet energy hole transporting interlayer with high mobility, combined with an interface exciplex that confines excitons at the emissive layer/electron transporting material interface. As a result, blue thermally activated delay fluorescent organic light-emitting diodes with a below-bandgap turn-on voltage of 2.5 V and an external quantum efficiency (EQE) of 41.2% were successfully fabricated. These devices also showed suppressed efficiency roll-off maintaining an EQE of 34.8% at 1000 cd m−2. Our approach paves the way for further progress through exploring alternative device engineering approaches instead of only focusing on the demanding synthesis of organic compounds with complex structures.

scholarly journals Effect of Optical and Morphological Control of Single-Structured LEC Device

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 843
Author(s):  
Woo Jin Jeong ◽  
Jong Ik Lee ◽  
Hee Jung Kwak ◽  
Jae Min Jeon ◽  
Dong Yeol Shin ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Surface Roughness ◽  
Surface Properties ◽  
High Efficiency ◽  
High Surface ◽  
Reduction Rate ◽  
Operating Characteristics ◽  
Emission Layer ◽  
Light Emitting ◽  
Stable Operating

We investigated the performance of single-structured light-emitting electrochemical cell (LEC) devices with Ru(bpy)3(PF6)2 polymer composite as an emission layer by controlling thickness and heat treatment. When the thickness was smaller than 120–150 nm, the device performance decreased because of the low optical properties and non-dense surface properties. On the other hand, when the thickness was over than 150 nm, the device had too high surface roughness, resulting in high-efficiency roll-off and poor device stability. With 150 nm thickness, the absorbance increased, and the surface roughness was low and dense, resulting in increased device characteristics and better stability. The heat treatment effect further improved the surface properties, thus improving the device characteristics. In particular, the external quantum efficiency (EQE) reduction rate was shallow at 100 °C, which indicates that the LEC device has stable operating characteristics. The LEC device exhibited a maximum luminance of 3532 cd/m2 and an EQE of 1.14% under 150 nm thickness and 100 °C heat treatment.

scholarly journals Efficient and large-area all vacuum-deposited perovskite light-emitting diodes via spatial confinement

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Peipei Du ◽  
Jinghui Li ◽  
Liang Wang ◽  
Liang Sun ◽  
Xi Wang ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
High Efficiency ◽  
Light Emitting Diodes ◽  
Scale Production ◽  
Nonradiative Recombination ◽  
Large Area ◽  
Spatial Confinement ◽  
Light Emitting ◽  
Large Scale Production

AbstractWith rapid advances of perovskite light-emitting diodes (PeLEDs), the large-scale fabrication of patterned PeLEDs towards display panels is of increasing importance. However, most state-of-the-art PeLEDs are fabricated by solution-processed techniques, which are difficult to simultaneously achieve high-resolution pixels and large-scale production. To this end, we construct efficient CsPbBr3 PeLEDs employing a vacuum deposition technique, which has been demonstrated as the most successful route for commercial organic LED displays. By carefully controlling the strength of the spatial confinement in CsPbBr3 film, its radiative recombination is greatly enhanced while the nonradiative recombination is suppressed. As a result, the external quantum efficiency (EQE) of thermally evaporated PeLED reaches 8.0%, a record for vacuum processed PeLEDs. Benefitting from the excellent uniformity and scalability of the thermal evaporation, we demonstrate PeLED with a functional area up to 40.2 cm2 and a peak EQE of 7.1%, representing one of the most efficient large-area PeLEDs. We further achieve high-resolution patterned perovskite film with 100 μm pixels using fine metal masks, laying the foundation for potential display applications. We believe the strategy of confinement strength regulation in thermally evaporated perovskites provides an effective way to process high-efficiency and large-area PeLEDs towards commercial display panels.

Electrostatic potential dispersing pyrimidine-5-carbonitrile acceptor for high efficiency and long lifetime thermally activated delayed fluorescence organic light-emitting diodes

2019 ◽  
Vol 7 (40) ◽  
pp. 12695-12703 ◽  
Author(s):  
Ji Seon Jang ◽  
Ha Lim Lee ◽  
Kyung Hyung Lee ◽  
Jun Yeob Lee
Keyword(s):  
Electrostatic Potential ◽  
High Efficiency ◽  
Delayed Fluorescence ◽  
Organic Light Emitting Diodes ◽  
Thermally Activated Delayed Fluorescence ◽  
Light Emitting ◽  
Thermally Activated ◽  
Organic Light ◽  
Long Lifetime ◽  
Acceptor Moiety

Pyrimidine-5-carbonitrile was developed as an electrostatic potential managing and strong acceptor moiety of thermally activated delayed fluorescent (TADF) emitters for high efficiency and long lifetime in devices.

Ultra-High Efficiency White Light Emitting Diodes

2006 ◽  
Vol 45 (No. 41) ◽  
pp. L1084-L1086 ◽  
Author(s):  
Yukio Narukawa ◽  
Junya Narita ◽  
Takahiko Sakamoto ◽  
Kouichiro Deguchi ◽  
Takao Yamada ◽  
...  
Keyword(s):  
White Light ◽  
High Efficiency ◽  
Light Emitting Diodes ◽  
Light Emitting ◽  
White Light Emitting Diodes
Sign in / Sign up

Export Citation Format

Share Document