Exciton diffusion and dissociation in a poly(p‐phenylenevinylene)/C60 heterojunction photovoltaic cell

1996 ◽  
Vol 68 (22) ◽  
pp. 3120-3122 ◽  
Author(s):  
J. J. M. Halls ◽  
K. Pichler ◽  
R. H. Friend ◽  
S. C. Moratti ◽  
A. B. Holmes
2020 ◽  
Vol 124 (6) ◽  
pp. 3489-3495 ◽  
Author(s):  
Kaicheng Shi ◽  
Ian J. Curtin ◽  
Andrew T. Healy ◽  
Tao Zhang ◽  
Deepesh Rai ◽  
...  

2018 ◽  
Vol 1 (2) ◽  
pp. 45
Author(s):  
Arin Dutta ◽  
Md. Abu Zaman ◽  
Fathema Farjana

In this research work, the performance parameters , such as fill factor (FF), external offquantum efficiency (EQE) , maximum power density and photon absorption profile of a planar hetero-junction poly 3-hexyl thiophene (P3HT) / phenyl-C61-butyric acid methyl ester (PCBM) photovoltaic cell has been simulated for different values of exciton diffusion length and thickness of donor layer where the simulation has been performed under the consideration of incident solar radiation of 1 kW/m2 irradiance , Air mass of 1.5, ambient temperature of 300K and Indium Tin Oxide (ITO) and Aluminium (Al) has been considered as the anode and cathode of the P3HT/PCBM solar cell respectively. The performance parameters and photon absorption profile of the P3HT/PCBM organic solar cell has been simulated for donor and acceptor layer thickness of 50, 60 and 70 nm and exciton diffusion length of 10, 15 and 20 nm . Finally, highest External Quantum Efficiency of 2.41% and Maximum Power Density of 24.10 W/m2 has been obtained for exciton diffusion length of 20 nm and donor thickness of 50 nm .


2015 ◽  
Vol 23 ◽  
pp. 53-56 ◽  
Author(s):  
Guangwei Xu ◽  
Nianduan Lu ◽  
Wei Wang ◽  
Nan Gao ◽  
Zhuoyu Ji ◽  
...  

2020 ◽  
Vol 89 (3) ◽  
pp. 30201 ◽  
Author(s):  
Xi Guan ◽  
Shiyu Wang ◽  
Wenxing Liu ◽  
Dashan Qin ◽  
Dayan Ban

Organic solar cells based on planar copper phthalocyanine (CuPc)/C60 heterojunction have been characterized, in which a 2 nm-thick layer of bathocuproine (BCP) is inserted into the CuPc layer. The thin layer of BCP allows hole current to tunnel it through but blocks the exciton diffusion, thereby altering the steady-state exciton profile in the CuPc zone (zone 1) sandwiched between BCP and C60. The short-circuit current density (JSC) of device is limited by the hole-exciton scattering effect at the BCP/CuPc (zone 1) interface. Based on the variation of JSC with the width of zone 1, the exciton diffusion length of CuPc is deduced to be 12.5–15 nm. The current research provides an easy and helpful method to determine the exciton diffusion lengths of organic electron donors.


2021 ◽  
Vol 12 (3) ◽  
pp. 966-972
Author(s):  
Tao Zhang ◽  
Deepesh Rai ◽  
Russell J. Holmes

Sign in / Sign up

Export Citation Format

Share Document