Manufacture of three‐dimensional microdevices using synchrotron radiation (invited)

1992 ◽  
Vol 63 (1) ◽  
pp. 713-721 ◽  
Author(s):  
D. Münchmeyer ◽  
J. Langen
Keyword(s):  
Synchrotron Radiation ◽  
Three Dimensional

High-resolution three-dimensional imaging of flat objects by synchrotron-radiation computed laminography

2005 ◽  
Vol 86 (7) ◽  
pp. 071915 ◽  
Author(s):  
L. Helfen ◽  
T. Baumbach ◽  
P. Mikulík ◽  
D. Kiel ◽  
P. Pernot ◽  
...  
Keyword(s):  
High Resolution ◽  
Synchrotron Radiation ◽  
Three Dimensional ◽  
Three Dimensional Imaging ◽  
Computed Laminography

scholarly journals Thermalization of synchrotron radiation from field-aligned currents

1988 ◽  
Vol 6 (3) ◽  
pp. 493-501 ◽  
Author(s):  
William Peter ◽  
Anthony L. Peratt
Keyword(s):  
Magnetic Field ◽  
Synchrotron Radiation ◽  
Energy Density ◽  
Radiation Spectrum ◽  
Axial Magnetic Field ◽  
Three Dimensional ◽  
Synchrotron Emission ◽  
Microwave Background ◽  
Strong Function ◽  
Current Filaments

Three-dimensional plasma simulations of interacting galactic-dimensioned current filaments show bursts of synchroton radiation of energy density 1·2 ×10−13 erg/cm3 which can be compared with the measured cosmic microwave background energy density of 1·5 × 10−13 erg/cm3. However, the synchrotron emission observed in the simulations is not blackbody. In this paper, we analyze the absorption of the synchrotron emission by the current filaments themselves (i.e., self-absorption) in order to investigate the thermalization of the emitted radiation. It is found that a large number of current filaments (>1031) are needed to make the radiation spectrum blackbody up to the observed measured frequency of 100 GHz. The radiation spectrum and the required number of current filaments is a strong function of the axial magnetic field in the filaments.

Nondestructive imaging of the internal microstructure of vessels and nerve fibers in rat spinal cord using phase-contrast synchrotron radiation microtomography

2017 ◽  
Vol 24 (2) ◽  
pp. 482-489 ◽  
Author(s):  
Jianzhong Hu ◽  
Ping Li ◽  
Xianzhen Yin ◽  
Tianding Wu ◽  
Yong Cao ◽  
...  
Keyword(s):  
Spinal Cord ◽  
Synchrotron Radiation ◽  
Phase Contrast ◽  
Three Dimensional ◽  
Nerve Fibers ◽  
The Body ◽  
Rat Spinal Cord ◽  
Nondestructive Imaging ◽  
Synchrotron Radiation Microtomography ◽  
The Brain

The spinal cord is the primary neurological link between the brain and other parts of the body, but unlike those of the brain, advances in spinal cord imaging have been challenged by the more complicated and inhomogeneous anatomy of the spine. Fortunately with the advancement of high technology, phase-contrast synchrotron radiation microtomography has become widespread in scientific research because of its ability to generate high-quality and high-resolution images. In this study, this method has been employed for nondestructive imaging of the internal microstructure of rat spinal cord. Furthermore, digital virtual slices based on phase-contrast synchrotron radiation were compared with conventional histological sections. The three-dimensional internal microstructure of the intramedullary arteries and nerve fibers was vividly detected within the same spinal cord specimen without the application of a stain or contrast agent or sectioning. With the aid of image post-processing, an optimization of vessel and nerve fiber images was obtained. The findings indicated that phase-contrast synchrotron radiation microtomography is unique in the field of three-dimensional imaging and sets novel standards for pathophysiological investigations in various neurovascular diseases.

scholarly journals Synchrotron radiation X-ray tomographic microscopy (SRXTM) of brachiopod shell interiors for taxonomy: Preliminary report

2010 ◽  
pp. 109-117 ◽  
Author(s):  
Neda Motchurova-Dekova ◽  
David Harper
Keyword(s):  
Synchrotron Radiation ◽  
Three Dimensional ◽  
X Rays ◽  
X Ray ◽  
Fine Grained ◽  
Internal Structures ◽  
Efficient Alternative ◽  
Micro Tomography ◽  
Light Beams ◽  
Non Destructive

Synchrotron radiation X-ray tomographic microscopy (SRXTM) is a non-destructive technique for the investigation and visualization of the internal features of solid opaque objects, which allows reconstruction of a complete three-dimensional image of internal structures by recording of the differences in the effects on the passage of waves of energy reacting with those structures. Contrary to X-rays, produced in a conventional X-ray tube, the intense synchrotron light beams are sharply focused like a laser beam. We report encouraging results from the use of SRXTM for purely taxonomic purposes in brachiopods: an attempt to find a non-destructive and more efficient alternative to serial sectioning and several other methods of dissection together with the non-destructive method of X-ray computerised micro-tomography. Two brachiopod samples were investigated using SRXTM. In ?Rhynchonella? flustracea it was possible to visualise the 3D shape of the crura and dental plates. In Terebratulina imbricata it was possible to reveal the form of the brachidium. It is encouraging that we have obtained such promising results using SRXTM with our very first two fortuitous samples, which had respectively fine-grained limestone and marl as infilling sediment, in contrast to the discouraging results communicated to us by some colleagues who have tested specimens with such infillings using X-ray micro-tomography. In future the holotypes, rare museum specimens or delicate Recent material may be preferentially subjected to this mode of analysis.

In Situ Testing Using Synchrotron Radiation Computed Tomography in Materials Research

MRS Advances ◽  
2019 ◽  
Vol 4 (51-52) ◽  
pp. 2831-2841
Author(s):  
Xinchen Ni ◽  
Nathan K. Fritz ◽  
Brian L. Wardle
Keyword(s):  
Computed Tomography ◽  
Synchrotron Radiation ◽  
Three Dimensional ◽  
Lithium Ion ◽  
Time Lapse ◽  
In Situ Testing ◽  
Temporal Dimension ◽  
Analysis Measurement ◽  
Materials Research

ABSTRACTHigh resolution (< 1 µm) computed tomography is an attractive tool in materials research due to its ability to non-destructively visualize the three-dimensional internal microstructures of the material. Recently, this technique has been further empowered by adding a fourth (temporal) dimension to study the time-lapse material response under load. Such studies are referred to as four-dimensional or in situ testing. In this snapshot review, we highlight three representative examples of in situ testing using synchrotron radiation computed tomography (SRCT) for composites failure analysis, measurement of local corrosion rate in alloys, and visualization and quantification of electrochemical reactions in lithium-ion batteries, as well as forward-looking integration of machine learning with in situ CT. Lastly, the future opportunities and challenges of in situ SRCT testing are discussed.

scholarly journals Development of an X-ray real-time stereo imaging technique using synchrotron radiation

2011 ◽  
Vol 18 (4) ◽  
pp. 569-574 ◽  
Author(s):  
Masato Hoshino ◽  
Kentaro Uesugi ◽  
James Pearson ◽  
Takashi Sonobe ◽  
Mikiyasu Shirai ◽  
...  
Keyword(s):  
Synchrotron Radiation ◽  
Real Time ◽  
Imaging System ◽  
Silicon Crystal ◽  
Three Dimensional ◽  
Stereo Image ◽  
Large Field ◽  
Depth Information ◽  
Stereo Imaging ◽  
X Ray

An X-ray stereo imaging system with synchrotron radiation was developed at BL20B2, SPring-8. A portion of a wide X-ray beam was Bragg-reflected by a silicon crystal to produce an X-ray beam which intersects with the direct X-ray beam. Samples were placed at the intersection point of the two beam paths. X-ray stereo images were recorded simultaneously by a detector with a large field of view placed close to the sample. A three-dimensional wire-frame model of a sample was created from the depth information that was obtained from the lateral positions in the stereo image. X-ray stereo angiography of a mouse femoral region was performed as a demonstration of real-time stereo imaging. Three-dimensional arrangements of the femur and blood vessels were obtained.

Nondestructive Observation of Thermal Fatigue Crack Propagation in FBGA and Die Attached Solder Joints by Synchrotron Radiation X-Ray Laminography

2015 ◽  
Author(s):  
Hiroyuki Tsuritani ◽  
Toshihiko Sayama ◽  
Yoshiyuki Okamoto ◽  
Takeshi Takayanagi ◽  
Masato Hoshino ◽  
...  
Keyword(s):  
Fatigue Crack ◽  
Synchrotron Radiation ◽  
Crack Propagation ◽  
Thermal Fatigue ◽  
Solder Joints ◽  
Fatigue Cracks ◽  
Three Dimensional ◽  
X Ray ◽  
Micro Cracks ◽  
Solder Bumps

The reliability of solder joints on printed circuit boards (PCBs) is significantly affected by thermal fatigue processes due to downsizing and high density packaging in electronic components. Accordingly, there is a strong desire in related industries for development of a new nondestructive inspection technology to detect fatigue cracks appearing in these joints. The authors have applied the SP-μCT, a synchrotron radiation X-ray microtomography system, to the nondestructive observation of such cracks. However, for planar objects such as PCB substrates, reconstruction of CT images is difficult due to insufficient X-ray transmission along the parallel axis of the substrate. In order to solve this problem, a synchrotron radiation X-ray laminography system was developed to overcome the size limits of such specimens. In this work, this system was applied to the three-dimensional, nondestructive observation of thermal fatigue cracks in solder joints, for which X-ray CT inspection has been extremely difficult. The observed specimens included two typical joint structures formed using Sn-3.0Ag-0.5Cu solder: (1) a fine pitch ball grid array (FBGA) joint specimen in which an LSI package is connected to a substrate by solder bumps 360 μm in diameter, and (2) a die-attached specimen in which a 3 mm square ceramic chip is mounted on a substrate. The optical system developed for use in X-ray laminography was constructed to provide a rotation axis with a 30° tilt from the right angle to the X-ray beam, and to obtain X-ray projection images via the beam monitor. The same solder joints were observed successively using the laminography system at beamline BL20XU at SPring-8, the largest synchrotron radiation facility in Japan. In the FBGA type specimen, fatigue cracks were clearly observed to appear at the periphery of the joint interface, and to propagate gradually to the inner regions of the solder bumps as thermal cycling proceeded. In contrast, in the die-attached joint specimen, micro-cracks were observed to appear and propagate through the thin solder layer. An important observation was that these micro-cracks become interconnected prior to propagation of the main fatigue crack. The fatigue crack propagation lifetime was also estimated in both specimens by measuring the crack surface area and calculating the average crack propagation rate through the three-dimensional images. Consequently, the sectional images obtained by the laminography system clearly show the process of crack propagation due to thermal cyclic loading.

scholarly journals 3D analysis of microvasculature in murine liver fibrosis models using synchrotron radiation-based microtomography

Angiogenesis ◽  
2020 ◽  
Author(s):  
Willi L. Wagner ◽  
Sonja Föhst ◽  
Jessica Hock ◽  
Yong Ook Kim ◽  
Yury Popov ◽  
...  
Keyword(s):  
Synchrotron Radiation ◽  
Liver Fibrosis ◽  
Vascular System ◽  
Fibrous Tissue ◽  
Three Dimensional ◽  
Organ Damage ◽  
Scar Tissue ◽  
3D Analysis ◽  
Electron Microscopic ◽  
Capillary Blood Vessel

Abstract Cirrhosis describes the development of excess fibrous tissue around regenerative nodules in response to chronic liver injury and usually leads to irreversible organ damage and end-stage liver disease. During the development of cirrhosis, the formation of collagenous scar tissue is paralleled by a reorganization and remodeling of the hepatic vascular system. To date, macrovascular remodeling in various cirrhosis models has been examined using three-dimensional (3D) imaging modalities, while microvascular changes have been studied mainly by two-dimensional (2D) light microscopic and electron microscopic imaging. Here, we report on the application of high-resolution 3D synchrotron radiation-based microtomography (SRμCT) for the study of the sinusoidal and capillary blood vessel system in three murine models of advanced parenchymal and biliary hepatic fibrosis. SRμCT facilitates the characterization of microvascular architecture and identifies features of intussusceptive angiogenesis in progressive liver fibrosis in a non-destructive 3D manner.

Sign in / Sign up

Export Citation Format

Share Document