Focusing properties of an anode‐controlled telefocus keV electron gun

1977 ◽  
Vol 48 (7) ◽  
pp. 893-896 ◽  
Author(s):  
B. Schiewe ◽  
H. Schmoranzer ◽  
P. Wollenweber
Keyword(s):  
Electron Gun ◽  
Focusing Properties

A High Performance Energy Analyzer for Use in Electron Scanning Microscopy

1969 ◽  
Vol 27 ◽  
pp. 14-15
Author(s):  
A. V. Crewe ◽  
M. Isaacson ◽  
D. Johnson
Keyword(s):  
High Performance ◽  
Vertical Plane ◽  
Median Plane ◽  
Electron Gun ◽  
Uniform Field ◽  
Loss Mechanism ◽  
Electron Scanning Microscopy ◽  
Sector Type ◽  
Double Focusing ◽  
Electron Energy Loss

A double focusing magnetic spectrometer has been constructed for use with a field emission electron gun scanning microscope in order to study the electron energy loss mechanism in thin specimens. It is of the uniform field sector type with curved pole pieces. The shape of the pole pieces is determined by requiring that all particles be focused to a point at the image slit (point 1). The resultant shape gives perfect focusing in the median plane (Fig. 1) and first order focusing in the vertical plane (Fig. 2).

Observation of Phase Contrast Images in STEM and CTEM Modes by Using 100 kV Field Emission Electron Gun

1974 ◽  
Vol 32 ◽  
pp. 390-391
Author(s):  
Y. Harada ◽  
T. Goto ◽  
H. Koike ◽  
T. Someya
Keyword(s):  
Field Emission ◽  
Phase Contrast ◽  
Image Formation ◽  
Fresnel Diffraction ◽  
Experimental Results ◽  
Electron Gun ◽  
Scanning Microscopy ◽  
Emission Electron ◽  
Lattice Images

Since phase contrasts of STEM images, that is, Fresnel diffraction fringes or lattice images, manifest themselves in field emission scanning microscopy, the mechanism for image formation in the STEM mode has been investigated and compared with that in CTEM mode, resulting in the theory of reciprocity. It reveals that contrast in STEM images exhibits the same properties as contrast in CTEM images. However, it appears that the validity of the reciprocity theory, especially on the details of phase contrast, has not yet been fully proven by the experiments. In this work, we shall investigate the phase contrast images obtained in both the STEM and CTEM modes of a field emission microscope (100kV), and evaluate the validity of the reciprocity theory by comparing the experimental results.

Structure and migration of planar defects in crystals observed in atomic scale

1978 ◽  
Vol 36 (1) ◽  
pp. 284-285 ◽  
Author(s):  
H. Hashimoto ◽  
Y. Sugimoto ◽  
Y. Takai ◽  
H. Endoh
Keyword(s):  
Electron Microscope ◽  
Rotation Angle ◽  
Crystal Surface ◽  
Electron Gun ◽  
Atomic Scale ◽  
Present Observation ◽  
Twist Boundary ◽  
Optical Magnification ◽  
Zinc Crystal ◽  
And Migration

As was demonstrated by the present authors that atomic structure of simple crystal can be photographed by the conventional 100 kV electron microscope adjusted at “aberration free focus (AFF)” condition. In order to operate the microscope at AFF condition effectively, highly stabilized electron beams with small energy spread and small beam divergence are necessary. In the present observation, a 120 kV electron microscope with LaB6 electron gun was used. The most of the images were taken with the direct electron optical magnification of 1.3 million times and then magnified photographically.1. Twist boundary of ZnSFig. 1 is the image of wurtzite single crystal with twist boundary grown on the surface of zinc crystal by the reaction of sulphur vapour of 1540 Torr at 500°C. Crystal surface is parallel to (00.1) plane and electron beam is incident along the axis normal to the crystal surface. In the twist boundary there is a dislocation net work between two perfect crystals with a certain rotation angle.

100 KV Scanning Microscope

1972 ◽  
Vol 30 ◽  
pp. 472-473 ◽  
Author(s):  
A. V. Crewe ◽  
M. W. Retsky
Keyword(s):  
High Voltage ◽  
Voltage Divider ◽  
Electron Gun ◽  
Objective Lens ◽  
Parallel Beam ◽  
Emission Point ◽  
Error Amplifier ◽  
External Reference ◽  
Scanning Transmission ◽  
Transmission Microscope

A 100 kv scanning transmission microscope has been built. Briefly, the design is as follows: The electron gun consists of a field emission point and a 3 cm Butler gun. The beam has a crossover outside the gun and is collimated by a condenser lens.The parallel beam passes through a defining aperture and is focused by the objective lens onto the specimen. The elastic electrons are detected by two annular detectors, each subtending a different angle, and the unscattered and inelastic electrons are collected by a third detector. The spectrometer that will separate the inelastic and unscattered electrons has not yet been built.The lens current supplies are stable to within one part per million per hour and have been described elsewhere.The high voltage is also stable to 1 ppm/hr. It consists of the raw supply from a 100 kv Spellman power supply controlled by an external reference voltage, high voltage divider, and error amplifier.

New type electron gun with electrostatic and electromagnetic lenses

1978 ◽  
Vol 36 (1) ◽  
pp. 62-63
Author(s):  
T. Ichinokawa ◽  
H. Maeda
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
Optimum Condition ◽  
Bias Voltage ◽  
Electron Gun ◽  
Charge Effect ◽  
Micro Fabrication ◽  
Maximum Brightness ◽  
New Type ◽  
The Ideal

I. IntroductionThermionic electron gun with the Wehnelt grid is popularly used in the electron microscopy and electron beam micro-fabrication. It is well known that this gun could get the ideal brightness caluculated from the Lengumier and Richardson equations under the optimum condition. However, the design and ajustment to the optimum condition is not so easy. The gun has following properties with respect to the Wehnelt bias; (1) The maximum brightness is got only in the optimum bias. (2) In the larger bias than the optimum, the brightness decreases with increasing the bias voltage on account of the space charge effect. (3) In the smaller bias than the optimum, the brightness decreases with bias voltage on account of spreading of the cross over spot due to the aberrations of the electrostatic immersion lens.In the present experiment, a new type electron gun with the electrostatic and electromagnetic lens is designed, and its properties are examined experimentally.

An improved magnetic prism design for a transmission electron microscope energy filter

1978 ◽  
Vol 36 (1) ◽  
pp. 40-41 ◽  
Author(s):  
John W. Andrew ◽  
F.P. Ottensmeyer ◽  
E. Martell
Keyword(s):  
Energy Resolution ◽  
Symmetry Plane ◽  
Fringe Field ◽  
Focal Distance ◽  
Electron Trajectories ◽  
Focusing Effect ◽  
Transmission Electron ◽  
Path Lengths ◽  
Electron Microscopes ◽  
Focusing Properties

Energy selecting electron microscopes of the Castaing-Henry prism-mirror-prism design suffer from a loss of image and energy resolution with increasing field of view. These effects can be qualitatively understood by examining the focusing properties of the prism shown in Fig. 1. A cone of electrons emerges from the entrance lens crossover A and impinges on the planar face of the prism. The task of the prism is to focus these electrons to a point B at a focal distance f2 from the side of the prism. Electrons traveling in the plane of the diagram (i.e., the symmetry plane of the prism) are focused toward point B due to the different path lengths of different electron trajectories in the triangularly shaped magnetic field. This is referred to as horizontal focusing; the better this focusing effect the better the energy resolution of the spectrometer. Electrons in a plane perpendicular to the diagram and containing the central ray of the incident cone are focused toward B by the curved fringe field of the prism.

Energy Distribution in Electron Beams

1972 ◽  
Vol 30 ◽  
pp. 568-569
Author(s):  
Tamotsu Ohno
Keyword(s):  
Electron Beam ◽  
Energy Distribution ◽  
Cross Section ◽  
Integral Curve ◽  
Electron Beams ◽  
Electron Gun ◽  
Angular Divergence ◽  
Apparent Increase ◽  
Integral Width ◽  
The Cross

The energy distribution in an electron; beam from an electron gun provided with a biased Wehnelt cylinder was measured by a retarding potential analyser. All the measurements were carried out with a beam of small angular divergence (<3xl0-4 rad) to eliminate the apparent increase of energy width as pointed out by Ichinokawa.The cross section of the beam from a gun with a tungsten hairpin cathode varies as shown in Fig.1a with the bias voltage Vg. The central part of the beam was analysed. An example of the integral curve as well as the energy spectrum is shown in Fig.2. The integral width of the spectrum ΔEi varies with Vg as shown in Fig.1b The width ΔEi is smaller than the Maxwellian width near the cut-off. As |Vg| is decreased, ΔEi increases beyond the Maxwellian width, reaches a maximum and then decreases. Note that the cross section of the beam enlarges with decreasing |Vg|.

A New High Intensity Grid Cap for RCA-EMU-3 Electron Microscopes

1968 ◽  
Vol 26 ◽  
pp. 316-317
Author(s):  
George Christov ◽  
Bolivar J. Lloyd
Keyword(s):  
Electron Beam ◽  
Electron Microscope ◽  
High Voltage ◽  
High Intensity ◽  
Electron Gun ◽  
Tungsten Filament ◽  
Fluorescent Screen ◽  
Electron Microscopes ◽  
Pass Through ◽  
Ground Potential

A new high intensity grid cap has been designed for the RCA-EMU-3 electron microscope. Various parameters of the new grid cap were investigated to determine its characteristics. The increase in illumination produced provides ease of focusing on the fluorescent screen at magnifications from 1500 to 50,000 times using an accelerating voltage of 50 KV.The EMU-3 type electron gun assembly consists of a V-shaped tungsten filament for a cathode with a thin metal threaded cathode shield and an anode with a central aperture to permit the beam to course the length of the column. The cathode shield is negatively biased at a potential of several hundred volts with respect to the filament. The electron beam is formed by electrons emitted from the tip of the filament which pass through an aperture of 0.1 inch diameter in the cap and then it is accelerated by the negative high voltage through a 0.625 inch diameter aperture in the anode which is at ground potential.

A correlation of CL emissions from Penrith sandstone with elemental distributions obtained by simultaneous SEM-CL and EDS analysis

1995 ◽  
Vol 53 ◽  
pp. 392-393
Author(s):  
Paul J. Wright
Keyword(s):  
Optical Microscope ◽  
Electron Gun ◽  
High Electron ◽  
Collection System ◽  
Electron Hole ◽  
Depositional Processes ◽  
Eds Analysis ◽  
Distribution Mapping ◽  
Backscattered Electron ◽  
Electron Imaging

Most industrial and academic geologists are familiar with the beautiful red and orange cathodoluminescence colours produced by carbonate minerals in an optical microscope with a cold cathode electron gun attached. The cement stratigraphies interpreted from colour photographs have been widely used to determine the post depositional processes which have modified sedimentary rock textures.However to study quartzose materials high electron densities and kV's are necessary to stimulate sufficient emission. A scanning electron microscope with an optical collection system and monochromator provides an adequate tool and gives the advantage of providing secondary and backscattered electron imaging as well as elemental analysis and distribution mapping via standard EDS/WDS facilities.It has been known that the incorporation of many elements modify the characteristics of the CL emissions from geological materials. They do this by taking up positions between the valence and conduction band thus providing sites to assist in the recombination of electron hole pairs.

Sign in / Sign up

Export Citation Format

Share Document