Prestressed Composite Continuous Bridge Girder

1976 ◽  
Vol 102 (1) ◽  
pp. 313-318
Author(s):  
Subhash C. Anand ◽  
Clarence J. Fennell
Keyword(s):  
Bridge Girder

The Influence of Slab Concreting Sequence on a Continuous Composite Girder Bridge

2016 ◽  
Vol 691 ◽  
pp. 96-107
Author(s):  
Tomas J. Zivner ◽  
Rudolf B. Aroch ◽  
Michal M. Fabry
Keyword(s):  
Concrete Slab ◽  
Transverse Cross Section ◽  
Slab Thickness ◽  
Slab Width ◽  
Composite Girder ◽  
Steel Members ◽  
Composite Bridge ◽  
Bridge Girder ◽  
Girder Bridge ◽  
Main Girder

This paper deals with the slab concreting sequence and its influence on a composite steel and concrete continuous highway girder bridge. The bridge has a symmetrical composite two-girder structure with three spans of 60 m, 80 m, 60 m (i.e. a total length between abutments of 200.0 m). The horizontal alignment is straight. The top face of the deck is flat. The bridge is straight. The transverse cross-section of the slab is symmetrical with respect to the axis of the bridge. The total slab width is 12 m. The slab thickness varies from 0.4 m on main girders to 0.25 m at its free edges and 0.3075 m at its axis of symmetry. The center-to-center spacing between main girders is 7 m and the slab cantilever on either side is 2.5 m long. Every main girder has a constant depth of 2800 mm and the thicknesses of the upper and lower flanges are variable. The lower flange is 1200 mm wide whereas the upper flange is 1000 mm wide. The two main girders have transverse bracing at abutments and at internal supports and at regular intervals in every span. The material of concrete slab is C35/45 and of steel members S355. The on-site pouring of the concrete slab segments is performed by casting them in a selected order and is done after the launching of the steel two girder bridge. The paper presents several concreting sequences and their influence on the normal stresses and deflections of the composite bridge girder.

Design of floating bridge girders against accidental ship collision loads

2016 ◽  
Author(s):  
Yanyan Sha ◽  
Jørgen Amdahl
Keyword(s):  
Finite Element Models ◽  
Cruise Ship ◽  
Box Girder ◽  
Global Response ◽  
Ship Structure ◽  
Steel Box Girder ◽  
Floating Bridge ◽  
Bridge Girder ◽  
Ship Collision ◽  
The Impact

The Norwegian Public Roads Administration is running a project “Ferry free coastal route E39” which includes replacing ferry crossings by bridges or tunnels across fjords in Western Norway. A floating bridge concept was proposed in the fjord-crossing project for Bjørnefjorden. As there are regular cruise routes passing by the bridge, it raises the concern for the consequences of accidental ship collision with the bridge girder. During the collision, the interactions between the bridge girder and the ship structure can be significant. Thus, in the design of the proposed bridge it is vital to evaluate the safety of the ship and the bridge. In this paper, detailed finite element models of a cruise ship and a steel box girder are developed. The impact scenarios and structural damages are studied. The results show that the proposed bridge girder design is generally safe to resist normal accidental ship collision loads. Numerical model of the whole bridge is also developed for further study of bridge global response subjected to ship collision load.

scholarly journals A cost optimized steel bridge girder design for aashto - WSD and LFD

1989 ◽  
Vol 23 (1) ◽  
pp. 67-88
Author(s):  
D. R. Schelling ◽  
C. C. Fu ◽  
Y. T. Hsu
Keyword(s):  
Steel Bridge ◽  
Bridge Girder
Sign in / Sign up

Export Citation Format

Share Document