Simulation of Reinforced Concrete Slab Behavior under Impact Loading

AEI 2008 ◽  
2008 ◽  
Author(s):  
M. Zineddin
Keyword(s):  
Reinforced Concrete ◽  
Impact Loading ◽  
Concrete Slab ◽  
Reinforced Concrete Slab

THE EFFECT OF IMPACT LOADS ON PRESTRESSED CONCRETE SLABS

2018 ◽  
Vol 5 (1) ◽  
Author(s):  
Youmn Al Rawi ◽  
Yehya Temsah ◽  
Hassan Ghanem ◽  
Ali Jahami ◽  
Mohamad Elani
Keyword(s):  
Reinforced Concrete ◽  
Prestressed Concrete ◽  
Impact Loading ◽  
Concrete Slab ◽  
Concrete Slabs ◽  
Shear Mode ◽  
Reinforced Concrete Slab ◽  
Finite Element Program ◽  
Reinforced Concrete Slabs ◽  
The Impact

Many research studies have been conducted on the effect of impact loading on structures, and design procedures were proposed for reinforced concrete (RC) slabs; however the availability of these studies and procedures are limited for prestressed slabs. The proposed research will examine, using numerical analysis, the impact of rock fall on prestressed concrete slabs with equivalent moment capacity reinforced concrete slabs. It is expected that prestressed concrete slabs will have different behavior to resist impact loading compared with traditional reinforced concrete slabs. The thickness of the prestressed concrete slab will be 25cm whereas that of the reinforced concrete slab will be 30cm. The impact loading consists of 500Kg drop weight. The drop height will be 10m, 15m and 20m.The structural analysis is performed using a Finite Element program "ABAQUS". A comparison will be done between both slab types in terms of failure mode, damage, and deflection. It has been found that both slabs failed in punching. However, the RC slab performed better than the prestressed concrete slab with respect to the value of the deflection at mid-span, while both showed punching shear mode of failure.

BEHAVIOR OF REINFORCED CONCRETE SLABS UNDER ACCIDENTAL IMPACTS

2018 ◽  
Vol 5 (2) ◽  
Author(s):  
Shamsoon Fareed
Keyword(s):  
Reinforced Concrete ◽  
Impact Loading ◽  
Concrete Slab ◽  
High Mass ◽  
Concrete Slabs ◽  
Reinforced Concrete Slab ◽  
Reinforced Concrete Slabs ◽  
Numerical Predictions ◽  
Operational Life ◽  
The Impact

Loads resulting from activities such as rock fall, heavy drop weights (for e.g. equipment's, heavy machines during installation), missile and aircraft interaction with slabs may results in loading intensity which have higher magnitude as compared to static loading. Based on the velocity of the impacting object at the time of contact, these activities may result in impact loading. Therefore, slabs designed should provide resistance to these accidental loading during their entire operational life. In this study, a dynamic non-linear finite element analyses were conducted to investigate the behavior of the reinforced concrete slabs subjected to high-mass low-velocity impacts. For this purpose, initially an already published impact test results were used to validate the numerical predictions. Following validation, a study was conducted to investigate the influence of the impact velocity on the behavior of the reinforced concrete slab. Based on the numerical investigation, it was found that the velocity of the impacting object has a significant influence on the behavior exhibited by slab under impact loading. Furthermore, it was also found that the behavior of slab under impact is both local and global. Local behavior is associated with the damage caused at the contact area of the slab and the impactor, whereas global behavior refers to the overall deformation of the slab when stress waves move away from the impact zone and travel towards the supports.

Dimension and Frequency Profiles of Concrete Highway Bridges in New Madrid Region of Southeastern Missouri

1997 ◽  
Vol 1594 (1) ◽  
pp. 84-93 ◽  
Author(s):  
Ralph Alan Dusseau
Keyword(s):  
Reinforced Concrete ◽  
Concrete Slab ◽  
Highway Bridges ◽  
Ambient Vibration ◽  
Earthquake Hazards ◽  
Empirical Formulas ◽  
Reinforced Concrete Slab ◽  
Box Girder ◽  
Bridge Spans ◽  
New Madrid

The results of a study funded by the U.S. Geological Survey as part of the National Earthquake Hazards Reduction Program are presented. The first objective of this study was the development of a database for all 211 highway bridges along I-55 in the New Madrid region of southeastern Missouri. Profiles for five key dimension parameters (which are stored in the database) were developed, and the results for concrete highway bridges are presented. The second objective was to perform field ambient vibration analyses on 25 typical highway bridge spans along the I-55 corridor to determine the fundamental vertical and lateral frequencies of the bridge spans measured. These 25 spans included six reinforced concrete slab spans and two reinforced concrete box-girder spans. The third objective was to use these bridge frequency results in conjunction with the dimension parameters stored in the database to develop empirical formulas for estimating bridge fundamental natural frequencies. These formulas were applied to all 211 Interstate highway bridges in southeastern Missouri. Profiles for both fundamental vertical and lateral frequencies were then developed, and the results for concrete highway bridges are presented.

Sign in / Sign up

Export Citation Format

Share Document