Performance investigation of organic Rankine-vapor compression refrigeration integrated system activated by renewable energy

2019 ◽  
Vol 20 (2) ◽  
pp. 206 ◽  
Author(s):  
B. Saleh ◽  
Ayman A. Aly ◽  
Ageel F. Alogla ◽  
Awad M. Aljuaid ◽  
Mosleh M. Alharthi ◽  
...  
Keyword(s):  
Renewable Energy ◽  
System Performance ◽  
Organic Rankine Cycle ◽  
Integrated System ◽  
Operating Conditions ◽  
Coefficient Of Performance ◽  
Working Fluid ◽  
Vapor Compression ◽  
Working Fluids ◽  
Vapor Compression Refrigeration

In this article, the performance and working fluid selection for an organic Rankine cycle-vapor compression refrigeration (ORC–VCR) integrated system activated by renewable energy is investigated. The performance of the system is described by the system coefficient of performance (COPS), and the refrigerant mass flow rate per kilowatt refrigeration capacity (m˙total). Twenty-three pure substances are proposed as working fluids for the integrated system. The basic integrated system performance is assessed and compared using the proposed working fluids. The basic VCR cycle works between 35 and 0 °C, while the basic ORC works between 35 and 100 °C. The impacts of different operating parameters such as the evaporator, the boiler, and the condenser temperatures on the ORC–VCR system performance are also examined. The results show that the cyclopentane accomplished the highest system performance under all investigated operating conditions. Accordingly, among the examined 23 working fluids, cyclopentane is the most appropriate working fluid for the integrated system from the viewpoints of environmental concerns and system performance. Nevertheless, due to its high flammability, further restrictions should be taken. The basic integrated system COPS, refrigeration effect, and the corresponding m˙total utilizing cyclopentane are 0.654, 361.3 kW, and 0.596 × 10−2 kg/(s kW), respectively.

An Experimental Investigation on Vapor Compression Refrigeration System Cascaded with Ejector Refrigeration System

2021 ◽  
pp. 2150028
Author(s):  
Vikas Kumar ◽  
Gulshan Sachdeva ◽  
Sandeep Tiwari ◽  
Parinam Anuradha ◽  
Vaibhav Jain
Keyword(s):  
Experimental Investigation ◽  
Thermal Equilibrium ◽  
Operating Conditions ◽  
Coefficient Of Performance ◽  
Vapor Compression ◽  
Refrigeration System ◽  
Compression System ◽  
Vapor Compression System ◽  
Vapor Compression Refrigeration ◽  
Cascaded System

A conventional vapor compression refrigeration system (VCRS) cascaded with a heat-assisted ejector refrigeration system (ERS) has been experimentally analyzed. Cascading allows the VCRS to operate at lower condenser temperatures and thus achieve a higher coefficient of performance. In this cascaded system, the condenser of the vapor compression system does not dissipate its heat directly to the evaporator of the ERS; instead, water circulates between the condenser of VCRS and the evaporator of ERS to exchange the heat. Seven ejectors of different geometries have been used in the ERS; however, all the ejectors could not maintain thermal equilibrium at the desired operating conditions. The compressor of the cascaded VCRS consumed 1.3 times less power than the noncascaded VCRS. Furthermore, the cascaded system provided a maximum 87.74% improvement in COP over the noncascaded system for the same operating conditions. The performance of the system remained constant until the critical condenser pressure of the ERS.

scholarly journals Parametric analysis of a combined ejector-vapor compression refrigeration cycle

2020 ◽  
Vol 15 (3) ◽  
pp. 398-408
Author(s):  
I Ouelhazi ◽  
Y Ezzaalouni ◽  
L Kairouani
Keyword(s):  
Current Model ◽  
Operating Conditions ◽  
Coefficient Of Performance ◽  
Refrigeration Cycle ◽  
Vapor Compression ◽  
Refrigeration System ◽  
Entrainment Ratio ◽  
Constant Area ◽  
Vapor Compression Refrigeration Cycle ◽  
Vapor Compression Refrigeration

Abstract From the last few years, the use of efficient ejector in refrigeration systems has been paid a lot of attention. In this article a description of a refrigeration system that combines a basic vapor compression refrigeration cycle with an ejector cooling cycle is presented. A one-dimensional mathematical model is developed using the flow governing thermodynamic equations based on a constant area ejector flow model. The model includes effects of friction at the constant-area mixing chamber. The current model is based on the NIST-REFPROP database for refrigerant property calculations. The model has basically been used to determine the effect of the ejector geometry and operating conditions on the performance of the whole refrigeration system. The results show that the proposed model predicts ejector performance, entrainment ratio and the coefficient of performance of the system and their sensitivity to evaporating and generating temperature of the cascade refrigeration cycle. The simulated performance has been then compared with the available experimental data from the literature for validation.

Thermodynamic Analysis and Working Fluid Optimization of a Combined ORC-VCC System Using Waste Heat From a Marine Diesel Engine

2014 ◽  
Author(s):  
Oumayma Bounefour ◽  
Ahmed Ouadha
Keyword(s):  
Thermodynamic Analysis ◽  
Waste Heat ◽  
Operating Conditions ◽  
Working Fluid ◽  
Vapor Compression ◽  
Marine Diesel ◽  
Vapor Compression Refrigeration ◽  
Propylene Yield ◽  
Fluid Optimization ◽  
Propane Butane

This paper examines through a thermodynamic analysis the feasibility of using waste heat from marine Diesel engines to drive a vapor compression refrigeration system. Several working fluids including propane, butane, isobutane and propylene are considered. Results showed that isobutane and Butane yield the highest performance, whereas propane and propylene yield negligible improvement compared to R134a for operating conditions considered.

scholarly journals Energy and Exergy Analysis of Combined Organic Rankine Cycle-Single and Dual Evaporator Vapor Compression Refrigeration Cycle

2019 ◽  
Vol 9 (23) ◽  
pp. 5028 ◽  
Author(s):  
Pektezel ◽  
Acar
Keyword(s):  
Exergy Analysis ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Working Fluid ◽  
Refrigeration Cycle ◽  
Vapor Compression ◽  
Exergy Destruction ◽  
Energy And Exergy ◽  
Energy And Exergy Analysis ◽  
Vapor Compression Refrigeration

This paper presents energy and exergy analysis of two vapor compression refrigeration cycles powered by organic Rankine cycle. Refrigeration cycle of combined system was designed with single and dual evaporators. R134a, R1234ze(E), R227ea, and R600a fluids were used as working fluids in combined systems. Influences of different parameters such as evaporator, condenser, boiler temperatures, and turbine and compressor isentropic efficiencies on COPsys and ƞex,sys were analyzed. Second law efficiency, degree of thermodynamic perfection, exergy destruction rate, and exergy destruction ratio were detected for each component in systems. R600a was determined as the most efficient working fluid for proposed systems. Both COPsys and ƞex,sys of combined ORC-single evaporator VCR cycle was detected to be higher than the system with dual evaporator.

scholarly journals Performance Analysis of Solar Combined Ejector-Vapor Compression Cycle Using Environmental Friendly Refrigerants

2013 ◽  
Vol 14 (1) ◽  
Author(s):  
A. B. Kasaeian ◽  
S. Daviran
Keyword(s):  
Internal Heat ◽  
Exergy Efficiency ◽  
Operating Conditions ◽  
Working Fluid ◽  
Vapor Compression ◽  
Refrigeration System ◽  
Environmental Friendly ◽  
Vapor Compression Cycle ◽  
Compression Cycle ◽  
Vapor Compression Refrigeration

In this study, a new model of a solar combined ejector-vapor compression refrigeration system has been considered. The system is equipped with an internal heat exchanger to enhance the performance of the cycle. The effects of working fluid and operating conditions on the system performance including COP, entrainment ratio (ω), compression ratio (rp) and exergy efficiency were investigated. Some working fluids suggested are: R114, R141b, R123, R245fa, R600a, R365mfc, R1234ze(e) and R1234ze(z). The results show that R114 and R1234ze(e) yield the highest COP and exergy efficiency followed by R123, R245fa, R365mfc, R141b, R152a and R600a. It is noticed that the COP value of the new solar ejector-vapor compression refrigeration cycle is higher than that of the conventional ejector cycle with R1234ze(e) for all operating conditions. This paper also demonstrates that R1234ze(e) will be a suitable refrigerant in the solar combined ejector-vapor compression refrigeration system, due to its environmental friendly properties and better performance. ABSTRAK: Kajian ini menganalisa model baru sistem penyejukan mampatan gabungan ejektor-wap solar.Sistem ini dilengkapi dengan penukar haba dalaman untuk meningkatkan prestasi kitaran.Kesan bendalir bekerja dan keadaan operasi pada prestasi sistem termasuk COP, nisbah pemerangkapan (ω), nisbah mampatan (rp) dan kecekapan eksergi telah disiasat.Beberapa bendalir bekerja yang dicadangkan adalah: R114, R141b, R123, R245fa, R600a, R365mfc, R1234ze(e) dan R1234ze(z).Hasil kajian menunjukkan R114 dan R1234ze(e) menghasilkan COP dan kecekapan eksergi tertinggi diikuti oleh R123, R245fa, R365mfc, R141b, R152a dan R600a.Didapati nilai COP kitaran penyejukan mampatan bagi ejektor-wap solar baru adalah lebih tinggi daripada kitaran ejektor konvensional dengan R1234ze(e) bagi semua keadaan operasi.Kertas kerja ini juga menunjukkan bahawa R1234ze(e) boleh menjadi penyejuk yang sesuai dalam sistem penyejukan mampatan gabungan ejektor -wap solar, kerana ianya mempunyai prestasi yang lebih baik serta sifatnya yang lebih mesra alam sekitar. KEYWORDS: environmental friendly refrigerants; solar combined ejector-vapor compression cycle; R1234ze(e)

Working Fluid Selection for Organic Rankine Cycles from a Molecular Structural Point of View

2013 ◽  
Vol 805-806 ◽  
pp. 649-653
Author(s):  
Bing Zhang ◽  
Shuang Yang ◽  
Jin Liang Xu ◽  
Guang Lin Liu
Keyword(s):  
Critical Temperature ◽  
Heat Source ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Point Of View ◽  
Operating Conditions ◽  
Working Fluid ◽  
Working Fluids ◽  
Organic Fluids ◽  
Cycle Efficiency

The optimum working conditions of 11 working fluids under different heat source temperatures for an organic Rankine cycle (ORC) were located in our previous work. In the current work, the system irreversibility of each candidate were calculated and compared at their optimal operating conditions. Obvious variation trends of both the cycle efficiency and irreversibility were found for different types of organic fluids. It is suggested, when selecting working fluid for our ORC system, the critical temperature should be as close as possible to the heat source temperature to achieve high cycle efficiency but avoid large irreversibility. The relationships between the structure of the molecules and the critical temperature of the working fluids are investigated qualitatively and potentially meaningful for the rational selection of proper organic fluids for certain ORCs.

scholarly journals Thermodynamic Analysis of a Rankine Cycle Powered Vapor Compression Ice Maker Using Solar Energy

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Bing Hu ◽  
Xianbiao Bu ◽  
Weibin Ma
Keyword(s):  
Solar Energy ◽  
System Performance ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Working Fluid ◽  
Cooling Power ◽  
Condensation Temperature ◽  
Vapor Compression ◽  
Maximum Value ◽  
Ice Production

To develop the organic Rankine-vapor compression ice maker driven by solar energy, a thermodynamic model was developed and the effects of generation temperature, condensation temperature, and working fluid types on the system performance were analyzed. The results show that the cooling power per square meter collector and ice production per square meter collector per day depend largely on generation temperature and condensation temperature and they increase firstly and then decrease with increasing generation temperature. For every working fluid there is an optimal generation temperature at which organic Rankine efficiency achieves the maximum value. The cooling power per square meter collector and ice production per square meter collector per day are, respectively, 126.44 W m−2and 7.61 kg m−2 day−1at the generation temperature of 140°C for working fluid of R245fa, which demonstrates the feasibility of organic Rankine cycle powered vapor compression ice maker.

Experimental Investigation of Vapor Compression Refrigeration System Performance Using Nano-Refrigerant

2014 ◽  
Vol 2 (2) ◽  
pp. 12-27
Author(s):  
Ahmed J. Hamad
Keyword(s):  
Experimental Investigation ◽  
System Performance ◽  
Cuo Nanoparticles ◽  
Working Fluid ◽  
Vapor Compression ◽  
Refrigeration System ◽  
Test Rig ◽  
Vapor Compression Refrigeration ◽  
R 134A ◽  
Thermo Physical Properties

     Experimental investigation of vapor compression refrigeration system performance using Nano-refrigerant is presented in this work. Nano-refrigerant was prepared in current work by mixing 50 nanometers diameter of copper oxide CuO nanoparticles with Polyolester lubrication oil and added to the compressor of the refrigeration system to be mixed with pure refrigerant R-134a during its circulation through refrigeration system. Three concentrations (0.1%, 0.25%, and 0.4%) of CuO-R134 a Nano-refrigerant are used to study the performance of the refrigeration system test rig and to investigate the effect of using Nano-refrigerant as a working fluid compared with pure refrigerant R-134a. The results showed that, the increasing in concentration of CuO nanoparticles in the Nano-refrigerant will significantly enhance the performance of the refrigeration system, as adding nanoparticles will increase the thermal conductivity, heat transfer and improve the thermo-physical properties of Nano-refrigerant. Investigation of performance parameters for refrigeration system using Nano-refrigerant with 0.4% concentration compared with that for pure refrigerant R-134a shows that, Nano-refrigerant has reflect higher performance in range of 10% and 1.5% increase in COP and refrigeration effect respectively and 7% reduction in power consumption for refrigeration system. It can be concluded that, Nano-refrigerants can be efficiently and economically feasible to be used in the vapor compression refrigeration systems.

A Comparative Study of Scroll Expander Performance Using CO2 and Zeotropic Mixtures As Working Fluids

2019 ◽  
Author(s):  
Arun Kumar Narasimhan ◽  
Diego Guillen Perez ◽  
D. Yogi Goswami
Keyword(s):  
Comparative Study ◽  
Organic Rankine Cycle ◽  
Volume Ratio ◽  
Rankine Cycle ◽  
Operating Conditions ◽  
Cycle Performance ◽  
Working Fluid ◽  
Brayton Cycle ◽  
Working Fluids ◽  
Scroll Expander

Abstract Scroll expanders are generally used for low temperature power generation applications due to their inherently small built-in volume ratio. The working fluid and operating conditions play an important role in the expander performance as well as its physical size and volume ratio. Hence, a comparative study of scroll expander performance was carried out between two different working fluids, R433C and supercritical (s-CO2). The s-CO2 Brayton cycle achieved a maximum cycle efficiency of 13.6% at an expander supply pressure of 11 MPa. Two separate scroll geometries were modeled for supercritical Organic Rankine Cycle (SORC) using R433C and s-CO2 Brayton cycle for the operating conditions that provided the maximum cycle performance. The s-CO2 scroll geometry achieved a maximum expander efficiency of 80% with a volume ratio of 2.5 and a diameter of 19 cm. The high inlet temperatures required a much higher volume ratio of 6.2 and scroll diameter of 30 cm for the R433C based SORC leading to greater leakages and lower expander efficiency of 62%. The comparative study shows that s-CO2 is better suited for scroll expander than R433C at such high expander supply temperatures.

scholarly journals Numerical Study of Multistage Transcritical Organic Rankine Cycle Axial Turbines

2014 ◽  
Vol 136 (8) ◽  
Author(s):  
L. Sciacovelli ◽  
P. Cinnella
Keyword(s):  
Numerical Study ◽  
Pressure Ratio ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Operating Conditions ◽  
Working Fluid ◽  
Dense Gas ◽  
Working Fluids ◽  
Inlet Conditions ◽  
The Impact

Transonic flows through axial, multistage, transcritical organic rankine cycle (ORC) turbines are investigated by using a numerical solver including advanced multiparameter equations of state and a high-order discretization scheme. The working fluids in use are the refrigerants R134a and R245fa, classified as dense gases due to their complex molecules and relatively high molecular weight. Both inviscid and viscous numerical simulations are carried out to quantify the impact of dense gas effects and viscous effects on turbine performance. Both supercritical and subcritical inlet conditions are studied for the considered working fluids. In the former case, flow across the turbine is transcritical, since turbine output pressure is subcritical. Numerical results show that, due to dense gas effects characterizing the flow at supercritical inlet conditions, supercritical ORC turbines enable, for a given pressure ratio, a higher isentropic efficiency than subcritical turbines using the same working fluid. Moreover, for the selected operating conditions, R134a provides a better performance than R245fa.

Sign in / Sign up

Export Citation Format

Share Document