scholarly journals Improvement reliability of cutting ceramic through use of damping system and nanostructured multilayered composite coatings

2018 ◽  
Vol 19 (6) ◽  
pp. 606
Author(s):  
Alexey Vereschaka ◽  
Boris Mokritskii ◽  
Alexey Krapostin ◽  
Nikolay Sitnikov ◽  
Gaik Oganyan
Keyword(s):  
Composite Coatings ◽  
Cutting Tools ◽  
Ceramic Tool ◽  
Tool Failure ◽  
Hardened Steels ◽  
Ion Flow ◽  
Automated Production ◽  
Ceramic Tools ◽  
Multilayered Composite ◽  
Cutting Ceramic

This paper considers new avenues of improving the efficiency of machining hardened steels using damping devices and nanostructured multilayered composite coatings deposited on ceramic cutting tools with innovative arc-PVD processes with filtration of vapor-ion flow. A developed technology allows reducing peak stresses arising during cutting-in and providing improved reliability of ceramic tools. It is observed that the formation of modifying coatings on an edge ceramic tool in machining of hardened steels with HRC > 50 under the conditions of damping can reduce the coefficient of tool failure variation down to 0.3, and that improves the ability to predict failure of ceramic tools and allows recommending ceramic tools for the use in automated production.

scholarly journals Improvement of structure and quality of nanoscale multilayered composite coatings, deposited by filtered cathodic vacuum arc deposition method

2016 ◽  
Vol 7 ◽  
pp. 184798041668080 ◽  
Author(s):  
Alexey A Vereschaka ◽  
Anatoly S Vereschaka ◽  
Andre DL Batako ◽  
Boris J Mokritskii ◽  
Anatoliy Y Aksenenko ◽  
...  
Keyword(s):  
Composite Coating ◽  
Surface Defects ◽  
Composite Coatings ◽  
Cutting Tools ◽  
Vacuum Arc ◽  
Multilayered Composite ◽  
Vacuum Arc Deposition ◽  
Filtered Cathodic Vacuum Arc ◽  
Longitudinal Turning ◽  
Arc Deposition

This article studies the specific features of cathode vacuum arc deposition of coatings used in the production of cutting tools. The detailed analysis of the major drawbacks of arc-Physical Vapour Deposition (PVD) methods has contributed to the development of the processes of filtered cathodic vacuum arc deposition to form nanoscale multilayered composite coatings of increased efficiency. This is achieved through the formation of nanostructure, increase in strength of adhesion of coating to substrate up to 20%, and reduction of such dangerous coating surface defects as macro- and microdroplets up to 80%. This article presents the results of the studies of various properties of developed nanoscale multilayered composite coating. The certification tests of carbide tool equipped with cutting inserts with developed nanoscale multilayered composite coating compositions in longitudinal turning (continuous cutting) and end symmetric milling, and intermittent cutting of steel C45 and hard-to-cut nickel alloy of NiCr20TiAl showed advantages of tool with nanoscale multilayered composite coating as compared to the tool without coating. The lifetime of the carbide inserts with developed NMCC based on the system of Ti–TiN–(NbZrTiCr)N (filtered cathodic vacuum arc deposition) was increased up to 5–6 times in comparison with the control tools without coatings and up to 1.5–2.0 times in comparison with nanoscale multilayered composite coating based on the system of Ti–TiN–(NbZrTiCr)N (standard arc-PVD technology).

Experimental Study on the Cutting Performance of TiC-Based Nanocomposite Ceramic Tools in Turning 40Cr Steel

2011 ◽  
Vol 325 ◽  
pp. 309-314
Author(s):  
Han Lian Liu ◽  
Ming Hong ◽  
Chuan Zhen Huang ◽  
Bin Zou
Keyword(s):  
Flank Wear ◽  
Adhesive Wear ◽  
Cutting Tools ◽  
Cutting Performance ◽  
Rake Face ◽  
Ceramic Tool ◽  
Tool Materials ◽  
Ceramic Tools ◽  
Multi Scale ◽  
40Cr Steel

TiC-based ceramic cutting tools with three different particle size levels of Al2O3 additives were fabricated and tested. Theses tool materials were identified as TA, TA10A5 and TA30A5 respectively in this study. Another commercial cutting material identified as LT55 was used in this study as baseline to investigate cutting performance by comparing the flank wear size. The experimental results showed that multi-scale nanocomposite ceramic tool TA10A5 had much better wear resistance than the other tools when turning at a lower speed. The wear mechanisms were mainly adhesive wear in the rake face. While cutting at a higher speed, the breakage failure occurred for the tools TA10A5 and TA30A5.

scholarly journals Nanostructured Multilayer Composite Coatings for Cutting Tools

2020 ◽  
Author(s):  
Sergey Grigoriev ◽  
Alexey Vereschaka ◽  
Marina Volosova ◽  
Caterina Sotova ◽  
Nikolay Sitnikov ◽  
...  
Keyword(s):  
Composite Coatings ◽  
Cutting Tools ◽  
Theoretical Background ◽  
Multilayer Composite ◽  
Wear Resistant ◽  
Wear Resistant Coatings ◽  
Ceramic Tools ◽  
Operation Conditions ◽  
Resistant Layer ◽  
Nanostructured Multilayer Composite Coatings

The chapter deals with the specific features concerning the application of wear-resistant coatings to improve the performance properties of ceramic cutting tools. The paper discusses the theoretical background associated with the specific operation conditions and wear of ceramic cutting tools and influencing the choice of the compositions and structures of wear-resistant coatings. The studies were focused on the application of the Ti-(Ti,Al)N-(Zr,Nb,Ti,Al)N multilayer composite coating with a nanostructured wear-resistant layer, as well as the (Cr,Al,Si)N–(DLC–Si)–DLC–(DLC–Si) and (Cr,Al,Si)N–DLC composite coatings in order to improve the cutting properties of ceramic tools. The chapter presents the results of the comparative cutting tests for the tools with the coatings under study, uncoated tools, and tools with the Ti-(Ti,Al)N commercial coating. The wear mechanisms typical for ceramic cutting tools with coatings of various compositions have been investigated.

scholarly journals Nano-scale Multilayered Composite Coatings for Cutting Tools Operating under Heavy Cutting Conditions

Procedia CIRP ◽  
2014 ◽  
Vol 14 ◽  
pp. 239-244 ◽  
Author(s):  
A.A. Vereschaka ◽  
S.N. Grigoriev ◽  
A.S. Vereschaka ◽  
A.Yu. Popov ◽  
A.D. Batako
Keyword(s):  
Composite Coatings ◽  
Cutting Tools ◽  
Cutting Conditions ◽  
Nano Scale ◽  
Multilayered Composite ◽  
Coatings For Cutting Tools

Failure analysis of ceramic tool in intermittent turning of hardened steel

2017 ◽  
Vol 232 (12) ◽  
pp. 2140-2153 ◽  
Author(s):  
Xiuying Ni ◽  
Jun Zhao ◽  
Fuzeng Wang ◽  
Feng Gong ◽  
Xin Zhong ◽  
...  
Keyword(s):  
Cutting Forces ◽  
Failure Modes ◽  
Failure Mechanisms ◽  
Cutting Tools ◽  
Transient Temperature ◽  
Ceramic Tool ◽  
Tool Failure ◽  
Fracture Modes ◽  
Intermittent Turning ◽  
Cutting Speeds

The aim of this investigation is to identify the Al2O3-(W, Ti)C ceramic fracture modes and failure mechanisms under different cutting speeds and feed rates during intermittent turning of hardened 20CrMnTi steel. The failure surfaces of the cutting tools were examined by digital optical microscope and scanning electron microscope. The cutting forces and transient temperature in the intermittent turning process were measured during the entire life cycle. The experimental results showed that the cutting forces exhibited an increasing trend with the tool failure progression, which in turn accelerated the tool failure progression. The main failure modes of ceramic tools were wear and micro-chipping in the initial stage and final fractures, resulting from mechanical damage and thermal damage in intermittent turning processes. And the cutting temperature increased with the increase in cutting speed. The cutting speeds and feed rates were closely correlated with ceramic tool fracture modes and failure mechanisms. Furthermore, the combination of cutting parameters was divided into four regions with different fracture modes and failure mechanisms of cutting tools according to the fracture morphology of cutting tools. This partitioning analysis can provide a basis for the design and development of different ceramic cutting tools with the desired properties for different applications.

Nano-scale multilayered-composite coatings for the cutting tools

2014 ◽  
Vol 72 (1-4) ◽  
pp. 303-317 ◽  
Author(s):  
A. A. Vereshchaka ◽  
A. S. Vereshchaka ◽  
O. Mgaloblishvili ◽  
M. N. Morgan ◽  
A. D. Batako
Keyword(s):  
Composite Coatings ◽  
Cutting Tools ◽  
Nano Scale ◽  
Multilayered Composite

Cutting Performance and Wear Mechanism of Si3N4-Based Nanocomposite Ceramic Tool

2010 ◽  
Vol 443 ◽  
pp. 324-329 ◽  
Author(s):  
Bin Zou ◽  
Chuan Zhen Huang ◽  
Han Lian Liu ◽  
Jin Peng Song
Keyword(s):  
Wear Resistance ◽  
Wear Mechanism ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Cutting Performance ◽  
Nano Particles ◽  
Ceramic Tool ◽  
Tool Materials ◽  
High Cutting Speed ◽  
The Matrix

Si3N4/TiN nanocomposite tool and Si3N4/Ti(C7N3) nanocomposite tool were prepared. The cutting performance and wear mechanism of Si3N4-based nanocomposite ceramic tool was investigated by comparison with a commercial sialon ceramic tool in machining of 45 steel. Si3N4-based nanocomposite ceramic tool exhibits the better wear resistance than sialon at the relatively high cutting speed. The increased cutting performance of Si3N4-based nanocomposite ceramic tool is ascribed to the higher mechanical properties. Nano-particles can refine the matrix grains and improve the bonding strength among the matrix grains of Si3N4-based nanocomposite ceramic tool materials. It contributes to an improved wear resistance of the cutting tools during machining.

scholarly journals Tribological properties of ion-modified composite coatings

2021 ◽  
Vol 2059 (1) ◽  
pp. 012015
Author(s):  
M Sh Migranov ◽  
A M Migranov ◽  
S R Shekhtman
Keyword(s):  
Wear Resistance ◽  
Tool Life ◽  
High Speed ◽  
Composite Coatings ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Hard Coating ◽  
Ion Nitriding ◽  
Additional Layer ◽  
Nitrided Surface

Abstract The paper presents the results of a study of one of the ways to increase the wear resistance of “duplex” coatings applied to cutting tools, which are due to preliminary diffusion saturation of the tool surface with nitrogen (known as ion nitriding) followed by physical deposition of a hard coating (Ti, Cr) N. The proposed coating also contains an additional layer with an impurity of ions, deposited on a preliminary nitrided surface of high speed steel before the deposition of a hard coating. Tests were carried out to evaluate the effect of these modified layers on the tool life of the HSS tool. The greatest wear resistance after "triplex" - treatment was achieved during ion implantation of titanium into a pre-nitrided surface. The coefficient of friction of the modified layer was studied at different contact temperatures. Ionic mixing contributes to the appearance of a thin surface layer with an amorphous-like structure, which prolongs the stage of normal wear, which significantly increases the tool life as a result of the self-organization process.

Cutting Performance and Wear Mechanisms of an Al2O3-Based Micro-Nano-Composite Ceramic Tool

2010 ◽  
Vol 443 ◽  
pp. 244-249 ◽  
Author(s):  
Yong Hui Zhou ◽  
Jun Zhao ◽  
Xing Ai
Keyword(s):  
Failure Modes ◽  
Cutting Tools ◽  
Tool Material ◽  
Composite Ceramic ◽  
Cutting Performance ◽  
Nano Particles ◽  
Ceramic Tool ◽  
Nano Composite ◽  
Micro Particles ◽  
1045 Steel

An Al2O3-based composite ceramic cutting tool material reinforced with (W, Ti)C micro-particles and Al2O3 micro-nano-particles was fabricated by using hot-pressing technique, the composite was denoted as AWT. The cutting performance, failure modes and mechanisms of the AWT micro-nano-composite ceramic tool were investigated via continuous turning of hardened AISI 1045 steel in comparison with those of an Al2O3/(W, Ti)C micro-composite ceramic tool SG-4 and a cemented carbide tool YS8. Worn and fractured surfaces of the cutting tools were characterized by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The results of continuous turning revealed that tool lifetime of the AWT ceramic tool was higher than that of the SG-4 and YS8 tools at all the tested cutting speeds. The longer tool life of the AWT composite ceramic tool was attributed to its synergistic strengthening/toughening mechanisms induced by the (W, Ti)C micro-particles and Al2O3 nano-particles.

Sign in / Sign up

Export Citation Format

Share Document