Analysis of the various processes downstream cathodic hydrogen charging, IV: detailed mechanism of sulfide stress cracking

2016 ◽  
Vol 104 (3) ◽  
pp. 303 ◽  
Author(s):  
Jean-Louis Crolet
Keyword(s):  
Detailed Mechanism ◽  
Hydrogen Charging ◽  
Stress Cracking ◽  
Sulfide Stress ◽  
Sulfide Stress Cracking

scholarly journals Comparison of 2507 Duplex and 28 % Cr- Austenitic Stainless Steel Corrosion Behavior for High Pressure and High Temperature (HPHT) in Sour Service Condition with C-ring Experiment

2021 ◽  
Author(s):  
Harris Prabowo ◽  
Badrul Munir ◽  
Yudha Pratesa ◽  
Johny W. Soedarsono
Keyword(s):  
High Pressure ◽  
Stainless Steel ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Corrosion Behavior ◽  
Material Selection ◽  
Stress Cracking ◽  
Sulfide Stress ◽  
Sulfide Stress Cracking ◽  
Sour Service

The scarcity of oil and gas resources made High Pressure and High Temperature (HPHT) reservoir attractive to be developed. The sour service environment gives an additional factor in material selection for HPHT reservoir. Austenitic 28 Cr and super duplex stainless steel 2507 (SS 2507) are proposed to be a potential materials candidate for such conditions. C-ring tests were performed to investigate their corrosion behavior, specifically sulfide stress cracking (SSC) and sulfide stress cracking susceptibility. The C-ring tests were done under 2.55 % H2S (31.48 psia) and 50 % CO2 (617.25 psia). The testing was done in static environment conditions. Regardless of good SSC resistance for both materials, different pitting resistance is seen in both materials. The pitting resistance did not follow the general Pitting Resistance Equivalent Number (PREN), since SS 2507 super duplex (PREN > 40) has more pitting density than 28 Cr austenitic stainless steel (PREN < 40). SS 2507 super duplex pit shape tends to be larger but shallower than 28 Cr austenitic stainless steel. 28 Cr austenitic stainless steel has a smaller pit density, yet deeper and isolated.

Fit For Service Qualification for Sour Service High Strength Production Casing For High Temperature

2021 ◽  
Author(s):  
Luciana I. L Lima ◽  
Christelle Gomes ◽  
Carine Landier ◽  
Marilia Lima ◽  
Kevin Schleiss ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Yield Strength ◽  
High Strength ◽  
Materials Selection ◽  
Well Production ◽  
Stress Cracking ◽  
Sulfide Stress ◽  
Sulfide Stress Cracking ◽  
Sour Service ◽  
Minimum Yield

Abstract In recent years the application of high strength carbon steel with 125ksi specified minimum yield strength as a production casing in deepwater and high-pressure reservoirs has increased. Sulfide stress cracking (SSC) can develop when high strength carbon steel is exposed to a sour environment. The H2S partial pressure in these sour reservoirs is above the 0.03 bar limit for this material at room temperature. Materials SSC performance evaluation requires an accurate simulation of field conditions in the laboratory. To evaluate the production casing SSC behavior, some fit for service (FFS) tests were carried out considering the well geothermic temperature profile for the materials selection. This paper presents a fit for service qualification carried out on Casing 125 ksi SMYS (Specified Minimum Yield Strength) materials. Two products with 125ksi SMYS were considered: one that has existed for several years and one developed more recently with a better SSC resistance – above the pH2S limit considered for the standard 125ksi SMYS material. The results obtained in this test program allowed casing 125 ksi SMYS materials selection for temperature above 65°C and environment more severe in terms of pH2S than the domain previously established for this grade. This allowed a new well production design, which saves one casing phase and avoids the necessity to use intermediate liners to prevent collapse.

Sign in / Sign up

Export Citation Format

Share Document