scholarly journals Effect of peroxide treatment on the structure and transparency of bacterial cellulose film

2018 ◽  
Vol 204 ◽  
pp. 05015 ◽  
Author(s):  
Heru Suryanto ◽  
Tito Arif Sutrisno ◽  
M. Muhajir ◽  
Neena Zakia ◽  
Uun Yanuhar
Keyword(s):  
Bacterial Cellulose ◽  
Diffraction Peak ◽  
Cellulose Film ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Pineapple Peel ◽  
Diffraction Angle ◽  
Structure Observation ◽  
Peel Extract

The cellulose extracts from plants are need of energy and have potential in damaging the environment so that an alternative cellulose source with more efficient results is by using bacteria to produce the cellulose fibers. This study aims to determine the effect of hydrogen peroxide (H2O2) treatment on the structure and transparency of biopolymer bacterial cellulose film (BCF). The method used is the making of BCF by utilizing pineapple peel extract and then cooking at 80°C for 120 min. with H2O2 concentration of 0%, 2.5%, 5%, and 7,5%. Drying is done in the electric oven and then observed the structure and morphology using X-ray diffraction and transparency test, respectively. The result of structure observation shows that the intensity of the highest diffraction peak lies at a diffraction angle of 22° achieved at 5% peroxide treatment with crystallinity and crystal index of 85.1% and 82.4%, respectively. Transparency testing shows that the higher the concentration of peroxide used, the better the transparency.

scholarly journals The study of rod-shaped TiO2 composite material in the protection of stone cultural relics

2020 ◽  
Vol 9 (1) ◽  
pp. 359-365
Author(s):  
Hui Shu ◽  
Yujian Song ◽  
Qiang Liu ◽  
Maobin Luo
Keyword(s):  
Photocatalytic Performance ◽  
Acid Resistance ◽  
Uv Resistance ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Excellent Photocatalytic Activity ◽  
Stone Culture ◽  
Weather Resistance ◽  
Cultural Relics

AbstractTiO2 has many advantages, such as UV resistance, thermal stability, and antibacterial; the attention toward TiO2 composite materials (TCMs) is rapidly increasing in the protection of stone culture relics. An innovative rod-shaped TCM was synthesized in this study. The structure and morphology of TCM were studied by X-ray diffraction and scanning electron microscopy. The acid resistance, weather resistance, hydrophilicity, and photocatalytic performance of TCM had been investigated. The experimental results indicated that TCM has good protection effects. The stone sample treated with TCM has stronger acid resistance and weather resistance, better hydrophilicity, and more excellent photocatalytic activity compared with the untreated stone. More importantly, the stone treated with TCM has better acid resistance and weather resistance than that treated with normal shaped TiO2 materials of the previous study. This work describes an effective way to protect stone cultural relics.

Problems Associated with Kα Doublet in Residual Stress Measurements

1979 ◽  
Vol 23 ◽  
pp. 333-339
Author(s):  
S. K. Gupta ◽  
B. D. Cullity
Keyword(s):  
Residual Stress ◽  
Silicon Powder ◽  
Lattice Parameter ◽  
Diffraction Peak ◽  
Parameter Determination ◽  
X Ray Diffraction ◽  
X Ray ◽  
Analysis Techniques ◽  
The Difference ◽  
Similar Accuracy

Since the measurement of residual stress by X-ray diffraction techniques is dependent on the difference in angle of a diffraction peak maximum when the sample is examined consecutively with its surface at two different angles to the diffracting planes, it is important that these diffraction angles be obtained precisely, preferably with an accuracy of ± 0.01 deg. 2θ. Similar accuracy is desired in precise lattice parameter determination. In such measurements, it is imperative that the diffractometer be well-aligned. It is in the context of diffractometer alignment with the aid of a silicon powder standard free of residual stress that the diffraction peak analysis techniques described here have been developed, preparatory to residual stress determinations.

Synthesis and Characterization of Multiferroic NiFe2O4/BiFeO3 Nanocomposites by Modified Pechini Method

2011 ◽  
Vol 197-198 ◽  
pp. 456-459
Author(s):  
Xian Ming Liu ◽  
Wen Liang Gao
Keyword(s):  
Pechini Method ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Magnetic Bias ◽  
Field Frequency ◽  
Magnetic Field Frequency ◽  
X Ray ◽  
Structure And Morphology ◽  
Modified Pechini Method

Spinel-perovskite multiferroics of NiFe2O4/BiFeO3 nanoparticles were prepared by modified Pechini method. The structure and morphology of the composites were examined by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the composites consisted of spinel NiFe2O4 and perovskite BiFeO3 after annealed at 700°C for 2h, and the particle size ranges from 40 to 100nm. VSM and ME results indicated that the nanocomposites exhibited both tuning magnetic properties and a ME effect. The ME effect of the nanocomposites strongly depended on the magnetic bias and magnetic field frequency.

Template Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation Method

2011 ◽  
Vol 311-313 ◽  
pp. 1713-1716 ◽  
Author(s):  
Yan Rong Sun ◽  
Tao Fan ◽  
Chang An Wang ◽  
Li Guo Ma ◽  
Feng Liu
Keyword(s):  
Electron Microscope ◽  
Chondroitin Sulfate ◽  
Aspartic Acid ◽  
Transmission Electron Microscope ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Transmission Electron ◽  
Co Precipitation

Nano-hydroxyapatite with different morphology was synthesized by the co-precipitation method coupled with biomineralization using Ca(NO3)2•4H2O and (NH4)2HPO4 as reagents, adding chondroitin sulfate, agarose and aspartic acid as template. The structure and morphology of the prepared powders were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM).

Transparent Conductive Cu-In-O Thin Films Deposited by Reactive DC Magnetron Sputtering with Different Targets

2011 ◽  
Vol 239-242 ◽  
pp. 2752-2755
Author(s):  
Fan Ye ◽  
Xing Min Cai ◽  
Fu Ping Dai ◽  
Dong Ping Zhang ◽  
Ping Fan ◽  
...  
Keyword(s):  
Thin Films ◽  
Magnetron Sputtering ◽  
Optical Band Gap ◽  
Diffraction Peak ◽  
X Ray Diffraction ◽  
Dc Magnetron Sputtering ◽  
Flow Rates ◽  
X Ray ◽  
Equal Distance ◽  
Transmittance Curve

Transparent conductive Cu-In-O thin films were deposited by reactive DC magnetron sputtering. Two types of targets were used. The first was In target covered with a fan-shaped Cu plate of the same radius and the second was Cu target on which six In grains of 1.5mm was placed with equal distance between each other. The samples were characterized with scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), UV/VIS spectrophotometer, four-probe measurement etc. SEM shows that the surfaces of all the samples are very smooth. EDX shows that the samples contain Cu, In as well as O, and different targets result in different atomic ratios of Cu to In. A diffraction peak related to rhombohedra-centered In2O3(012) is observed in the XRD spectra of all the samples. For both the two targets, the transmittance decreases with the increase of O2flow rates. The direct optical band gap of all the samples is also estimated according to the transmittance curve. For both the two targets, different O2flow rates result in different sheet resistances and conductivities. The target of Cu on In shows more controllability in the composition and properties of Cu-In-O films.

Characteristic of a Novel Composite Inorganic Polymer Coagulant-PAZF Prepared from Industrial Wastes

2014 ◽  
Vol 977 ◽  
pp. 82-85
Author(s):  
Ming Li ◽  
Yan Zhen Yu ◽  
Juan Ting Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Complex Compounds ◽  
Industrial Wastes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Coagulation Performance ◽  
Composite Coagulant ◽  
Scanning Electron

A new composite coagulant polymeric aluminum zinc ferric (PAZF) was synthesized from industrial wastes. The structure and morphology of the coagulant was characterized by X-ray Diffraction (XRD), Infrared Spectroscopy (IR) and Scanning Electron Microscopy (SEM) and the coagulation performances were evaluated by dyeing-printing wastewater treatment. The results show that new complex compounds are formed in PAZF. Compared with poly aluminum chloride (PAC), the contents of ionic polymerized bonds and the cross-copolymerization among Fe (III), Al (III) and Zn (II) hydroxyl polymerized bonds are increase obviously, and the surface morphology of PAZF presents a net-like structure with the longer molecular chain. Coagulation experiments indicate that PAZF exhibits better coagulation performance in removing turbidity, COD and chromaticity.

scholarly journals Structure and Morphology Properties of Nanoparticle Hematite Pigment from Lathe Waste

2021 ◽  
Vol 13 (1) ◽  
pp. 21
Author(s):  
Lilik Miftahul Khoiroh ◽  
Asmaul Dwi Ayu Sholekah ◽  
Eny Yulianti
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Diffraction Data ◽  
X Ray Diffraction ◽  
Crystallinity Degree ◽  
X Ray ◽  
Structure And Morphology ◽  
Calcination Method ◽  
Scanning Electron ◽  
Color Reader

Hematite coated PEG was synthesized by the sonication-calcination method. A variation of Na2CO3 is investigated to know the effect on structure and morphology. Characterization of samples are using X-ray fluorescence, X-ray diffraction, Scanning electron microscopy, and color reader techniques. XRF data showed that iron is the highest element in the precursor. The X-ray diffraction data confirm that Fe(OH)3, α-FeOOH, and Fe3O4 established at the sonication stage are then transformed into the α-Fe2O3 phase after calcination. The X-ray diffraction data also was found that α-Fe2O3 at 0.5 M formed with the highest crystallinity degree. The scanning electron microscopy showed that the particle's shape is spherical, bar-shaped, and aggregate. However, the distribution of particles is not uniform and still displays agglomeration. The Color reader shows the highest degree of lightness obtained is at 1 M variation.

Sign in / Sign up

Export Citation Format

Share Document