TEST RESULTS OF 60-cm BORE Nb3Sn TEST MODULE COIL (TMC-I) IN THE CLUSTER TEST FACILITY

1984 ◽  
Vol 45 (C1) ◽  
pp. C1-101-C1-104 ◽  
Author(s):  
T. Ando ◽  
S. Shimamoto ◽  
T. Hiyama ◽  
H. Tsuji ◽  
Y. Takahashi ◽  
...  
Keyword(s):  
Test Facility ◽  
Test Results ◽  
Test Module

TEST RESULTS OF 60-cm BORE Nb3Sn TEST MODULE COIL (TMC-I) IN THE CLUSTER TEST FACILITY

1984 ◽  
Vol 45 (C1) ◽  
pp. C1-101-C1-104
Author(s):  
T. Ando ◽  
S. Shimamoto ◽  
T. Hiyama ◽  
H. Tsuji ◽  
Y. Takahashi ◽  
...  
Keyword(s):  
Time Constant ◽  
Decay Time ◽  
Superconducting State ◽  
Heat Input ◽  
Test Facility ◽  
Test Results ◽  
Normal Zone ◽  
Out Of Plane ◽  
Force Mode ◽  
Test Module

An extended test of a 60-cm-bore Nb3Sn coil (TMC-I), constructed as a development of superconducting toroidal coil in tokamak machine, has been carried out in the cluster test facility. A 192-cm-length (one turn) normal zone, nucleated by a heat-input in the innermost turn, is recovered to superconducting state at 6 kA and 10 T. For the manual dump with a decay time constant of 6.6 sec (B = 1.0 T/sec), no damage is found on the TMC-I. In addition, a out-of-plane force mode operation, using one of the cluster test coils, is done with no trouble. With these good results, the first stage in TMC-I test was completed. And as the next stage, up-grading the cluster test facility for further TMC-I test in 11 T is now going ahead.

Status Report—Advanced Heat Exchanger Technology for a CCGT Power Generation System

1983 ◽  
Vol 105 (2) ◽  
pp. 348-353 ◽  
Author(s):  
D. E. Wright ◽  
L. L. Tignac
Keyword(s):  
Power Generation ◽  
Heat Exchanger ◽  
Fluidized Bed ◽  
Ceramic Materials ◽  
Department Of Energy ◽  
Test Facility ◽  
Status Report ◽  
Test Results ◽  
Generation System ◽  
Power Generation System

Rocketdyne is under contract to the Department of Energy for the development of heat exchanger technology that will allow coal to be burned for power generation and cogeneration applications. This effort involves both atmospheric fluidized bed and pulverized coal combustion systems. In addition, the heat exchanger designs cover both metallic and ceramic materials for high-temperature operations. This paper reports on the laboratory and small AFB test results completed to date. It also covers the design and installation of a 6×6 ft atmospheric fluidized bed test facility being used to correlate and expand the knowledge gained from the initial tests. The paper concludes by showing the direction this technology is taking and outlining the steps to follow in subsequent programs.

An Improved Test Facility for Studying Deposit Fouling on Steam Turbine Blades

2016 ◽  
Author(s):  
Alan R. May Estebaranz ◽  
Richard J. Williams ◽  
Simon I. Hogg ◽  
Philip W. Dyer
Keyword(s):  
Turbine Blades ◽  
Steam Pressure ◽  
Reactor Vessel ◽  
Test Facility ◽  
Test Results ◽  
Steam Turbines ◽  
Steam Power ◽  
Scale Test ◽  
Steam Turbine Blades ◽  
Asme Paper

A laboratory scale test facility has been developed to investigate deposition in steam turbines under conditions that are representative of those in steam power generation cycles. The facility is an advanced two-reactor vessel test arrangement, which is a more flexible and more accurately controllable refinement to the single reactor vessel test arrangement described previously in ASME Paper No. GT2014-25517 [1]. The commissioning of the new test facility is described in this paper, together with the results from a series of tests over a range of steam conditions, which show the effect of steam conditions (particularly steam pressure) on the amount and type of deposits obtained. Comparisons are made between the test results and feedback/experience of copper fouling in real machines.

scholarly journals Control of Fan Blade Vibrations Using Piezoelectrics and Bi-Directional Telemetry

2011 ◽  
Author(s):  
Andrew J. Provenza ◽  
Carlos R. Morrison
Keyword(s):  
Low Voltage ◽  
Radio Telemetry ◽  
Magnetic Bearing ◽  
Test Facility ◽  
Test Results ◽  
Novel Device ◽  
Ac Power ◽  
Dynamic Spin ◽  
Wireless Device ◽  
Fan Blade

A novel wireless device which transfers supply power through induction to rotating operational amplifiers and transmits low voltage AC signals to and from a rotating body by way of radio telemetry has been successfully demonstrated in the NASA Glenn Research Center (GRC) Dynamic Spin Test Facility. In the demonstration described herein, a rotating operational amplifier provides controllable AC power to a piezoelectric patch epoxied to the surface of a rotating Ti plate. The amplitude and phase of the sinusoidal voltage command signal, transmitted wirelessly to the amplifier, was tuned to completely suppress the 3rd bending resonant vibration of the plate. The plate’s 3rd bending resonance was excited using rotating magnetic bearing excitation while it spun at slow speed in a vacuum chamber. A second patch on the opposite side of the plate was used as a sensor. This paper discusses the characteristics of this novel device, the details of a spin test, results from a preliminary demonstration, and future plans.

Test results of the FER/ITER conductors in the FENIX test facility

1994 ◽  
Vol 30 (4) ◽  
pp. 2042-2045 ◽  
Author(s):  
M. Sugimoto ◽  
T. Isono ◽  
K. Koizuni ◽  
Y. Takahashi ◽  
M. Nishi ◽  
...  
Keyword(s):  
Test Facility ◽  
Test Results

scholarly journals Pengembangan Modul Statistika sebagai Media Penunjang Mata Kuliah Institusi di IKIP Budi Utomo Malang

2016 ◽  
Vol 22 (1) ◽  
pp. 13-20
Author(s):  
Rina Wijayanti ◽  
Siti Napfiah
Keyword(s):  
Data Collection ◽  
Evaluation Methods ◽  
Research Development ◽  
Test Results ◽  
Design Development ◽  
Development Method ◽  
Implementation Evaluation ◽  
Analysis Design ◽  
Cover Design ◽  
Test Module

This research aims to produce products such as module, which supporter statistics courses in IKIP Budi Utomo Malang institutions. It can be used to enhance the students' ability to solve problems. This research development method using ADDIE models which include analysis, design, development, implementation, evaluation. Methods of data collection in this study include legibility test. Results of this study we concluded the step wrote statistics module that determining competency standards, specify the title of the module, arrange the contents of the module, cover design, legibility test, revision and production. Based on the conclusion that thelegibility test for aspects of language, presentation, and graphic declared valid while the worthiness aspect of the module is very valid. So based on student legibility test module does not need to be revised. 

Application of the Rotating Water Table to Nozzle Wake Excitation in Low Pressure Turbines

1985 ◽  
Author(s):  
Shun Chen
Keyword(s):  
Water Table ◽  
Low Pressure ◽  
Test Facility ◽  
Test Results ◽  
Unsteady Forces ◽  
Low Pressure Turbine ◽  
Rotating Blade ◽  
Stator Vane ◽  
Two Dimensional Flow ◽  
Hydraulic Analogy

The hydraulic analogy was employed in a rotating water table for simulating the compressible two dimensional flow in a low pressure turbine stage. Both steady and unsteady forces were measured directly on a rotating blade in a blade row rotating concentrically with a row of stator vanes. With proper modeling of the simulation, it is shown that the rotating water table can yield results that agree favorably with the analytical predictions and turbine test results. Using this test facility, the effects of axial spacing between rotor and stator rows on the nozzle wake excitation have been investigated for two different stator vane profiles. The water table test results correlate qualitatively with the turbine test data. The cancellation of nozzle passing frequency excitation by off-setting nozzle pitch was demonstrated in the water table and the results compared with both the analytical predictions and the laboratory turbine test results.

Introduction and Commissioning of the New Darmstadt Transonic Compressor Test Facility

2019 ◽  
Author(s):  
Christian Kunkel ◽  
Jan Werner ◽  
Daniel Franke ◽  
Heinz-Peter Schiffer ◽  
Fabian Wartzek ◽  
...  
Keyword(s):  
Control Systems ◽  
Gas Turbines ◽  
State Of The Art ◽  
Test Facility ◽  
Test Results ◽  
Test Rig ◽  
Vast Number ◽  
Transonic Compressor ◽  
Profound Knowledge ◽  
And Control

Abstract With the well-known Transonic Compressor Darmstadt (TCD) in operation since 1994, profound knowledge in designing and operating a sophisticated test-rig is available at the Institute of Gas Turbines and Aerospace Propulsion of TU Darmstadt. During this period, TCD has been subject to a vast number of redesigns within different measurement campaigns (see [1], [2], [3], [4], [5], [6], [7], [8]). To expand the capabilities and ensure a sustainable process of compressor research, a new test facility was designed and built by the institute. The new test rig Transonic Compressor Darmstadt 2 (TCD2) features increased power for higher pressure ratios and higher mass-flow, a state of the art control system, increased flexibility towards different compressor geometries and modern data acquisition hardware and software. Following the successful commissioning of the test-rig in March 2018, a first measurement campaign has been conducted. Early test results regarding aerodynamic performance and aeroelastic effects of the test compressor are presented together with a detailed overview of test-rig infrastructure and control systems as well as the test compressor and the measurement hardware.

Pressure Testing of New 8” Pipeline Lateral With Air

2006 ◽  
Author(s):  
K. K. Botros ◽  
J. Geerligs ◽  
A. Glover ◽  
G. Nahas
Keyword(s):  
Air Temperature ◽  
Small Volume ◽  
Small Diameter ◽  
Area Ratio ◽  
Test Facility ◽  
Pilot Test ◽  
Test Results ◽  
Pressure Testing ◽  
Upper Limit ◽  
Simulated Test

A procedure for pressure testing of small diameter pipelines (up to NPS 12) using air has been developed based on pilot test results conducted on a controlled simulated test section of a small volume = 18.5 m3. This paper describes the simulated test facility and presents results of five simulated tests with different size pinhole leaks. A model describing leaks and effects of variation in air temperature has been developed, and together with the test results, a criteria for the upper limit of pipe volume to leak area ratio for implementation of air testing for various pipe sizes, has been arrived at. The procedure was then developed and utilized on a project approved by the Alberta Energy Utility Board. Results of this test on a new 12.2 km NPS 8 pipeline lateral in Alberta are also presented.

The Design and Testing of a Molten Salt Steam Generator for Solar Application

1988 ◽  
Vol 110 (1) ◽  
pp. 38-44 ◽  
Author(s):  
W. A. Allman ◽  
D. C. Smith ◽  
C. R. Kakarala
Keyword(s):  
Molten Salt ◽  
Steam Generator ◽  
Test Facility ◽  
Process Conditions ◽  
Test Results ◽  
Overall Design ◽  
Central Receiver ◽  
And Performance ◽  
Design And Testing ◽  
Solar Application

This paper describes the design and testing of the Steam Generator Subsystem (SGS) for the Molten Salt Electric Experiment at Sandia Laboratories in Albuquerque, New Mexico. The Molten Salt Electric Experiment (MSEE) has been established at the Department of Energy’s five megawatt thermal Solar Central Receiver Test Facility, to demonstrate the feasibility of the molten salt central receiver concept. The experiment is capable of generating 0.75 megawatts of electric power from solar energy, with the capability of storing seven megawatt-hours of thermal energy. The steam generator subsystem transfers sensible heat from the solar-heated molten nitrate salt to produce steam to drive a conventional turbine. This paper discusses the design requirements dictated by the steam generator application and also reviews the process conditions. Details of each of the SGS components are given, featuring the aspects of the design and performance unique to the solar application. The paper concludes with a summary of the test results confirming the overall design of the subsystem.

Sign in / Sign up

Export Citation Format

Share Document