Investigation of structural stability, physical and mechanical properties of nitrogen-free and nitrogen-containing austenitic alloys of the Fe-Cr-Mn system at low temperatures

2003 ◽  
Vol 112 ◽  
pp. 279-282
Author(s):  
G. Grikurov ◽  
I. Baratashvili ◽  
L. Skibina ◽  
M. Chernik ◽  
N. Antropov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Structural Stability ◽  
Low Temperatures ◽  
Physical And Mechanical Properties ◽  
Austenitic Alloys

scholarly journals Effect of TiO2 Nanoparticles on Physical and Mechanical Properties of Cement at Low Temperatures

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Li Wang ◽  
Hongliang Zhang ◽  
Yang Gao
Keyword(s):  
Mechanical Properties ◽  
Low Temperatures ◽  
Cement Hydration ◽  
Setting Time ◽  
Physical And Mechanical Properties ◽  
Xrd Analysis ◽  
Cementitious Materials ◽  
Strength Test ◽  
Hydration Degree ◽  
Time Test

Low temperature negatively affects the engineering performance of cementitious materials and hinders the construction productivity. Previous studies have already demonstrated that TiO2 nanoparticles can accelerate cement hydration and enhance the strength development of cementitious materials at room temperature. However, the performance of cementitious materials containing TiO2 nanoparticles at low temperatures is still unknown. In this study, specimens were prepared through the replacement of cement with 1 wt.%, 2 wt.%, 3 wt.%, 4 wt.%, and 5 wt.% TiO2 nanoparticles and cured under temperatures of 0°C, 5°C, 10°C, and 20°C for specific ages. Physical and mechanical properties of the specimens were evaluated through the setting time test, compressive strength test, flexural strength test, hydration degree test, mercury intrusion porosimetry (MIP), X-ray diffraction (XRD) analysis, thermal gravimetric analysis (TGA), and scanning electron microscopy (SEM) in order to examine the performance of cementitious materials with and without TiO2 nanoparticles at various curing temperatures. It was found that low temperature delayed the process of cement hydration while TiO2 nanoparticles had a positive effect on accelerating the cement hydration and reducing the setting time in terms of the results of the setting time test, hydration degree test, and strength test, and the specimen with the addition of 2 wt.% TiO2 nanoparticles showed the superior performance. Refined pore structure in the MIP tests, more mass loss of CH in TGA, intense peak appearance associated with the hydration products in XRD analysis, and denser microstructure in SEM demonstrated that the specimen with 2 wt.% TiO2 nanoparticles exhibited preferable physical and mechanical properties compared with that without TiO2 nanoparticles under various curing temperatures.

scholarly journals Efecto del dióxido de titanio en las propiedades mecánicas y autolimpiantes del mortero

2021 ◽  
Vol 25 (109) ◽  
pp. 88-97
Author(s):  
Carlos Magno Chavarry Vallejos ◽  
Liliana Janet Chavarría Reyes ◽  
Xavier Antonio Laos Laura ◽  
Andrés Avelino Valencia Gutiérrez ◽  
Enriqueta Pereyra Salardi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tio2 Nanoparticles ◽  
Low Temperatures ◽  
Mechanical Performance ◽  
Cement Mortar ◽  
Physical And Mechanical Properties ◽  
Cementitious Composites ◽  
Palabras Clave ◽  
Self Cleaning

El presente artículo tiene como objetivo determinar la influencia de la adición del dióxido de titanio (TiO2) en el mortero de cemento Pórtland Tipo I. La investigación es descriptiva, correlacional, explicativo, con diseño experimental, longitudinal, prospectivo y estudio de cohorte. Se elaboró una mezcla patrón y tres mezclas de mortero con 5%, 7.5% y 10% de contenido de TiO2 como reemplazo del volumen de cemento para las propiedades autolimpiantes se realizó el ensayo de rodamina e intemperismo. La incorporación de dióxido de titanio disminuyó la resistencia a la compresión, incrementó la fluidez y tasa de absorción de agua; la prueba de rodamina dio que el mortero sin actividad fotocatalítico no contenía TiO2 porque no cumple con los factores de fotodegradación R4 y R26. Mediante la exposición de paneles al intemperismo favoreciendo la propiedad autolimpiante de los morteros con adición de TiO2 (5%). Palabras Clave: Actividad foto catalítico, dióxido de titanio, factores de fotodegradación, propiedades mecánicas y autolimpiante. Referencias [1]E. Medina and H. Pérez, “Influencia del fotocatalizador dióxido de titanio en las propiedades autolimpiables y mecánicas del mortero de cemento - arena 1:4 - Cajamarca,” Universidad Nacional de Cajamarca, 2017. [2]G. Abella, “Mejora de las propiedades de materiales a base de cemento que contienen TiO 2 : propiedades autolimpiantes,” Universidad Politécnica de Madrid, 2015. [3]J. Gonzalez, “El Dióxido de titanio como material fotocatalitico y su influencia en la resistencia a la compresión en Morteros,” Universidad de San Buenaaventura Seccional Bello, 2015. [4]D. Jimenez and J. Moreno, “Efecto del reemplazo de cemento portland por el dioido de titanio en las propiedades mecanicas del mortero,” Pontificia Universidad Javeriana, 2016. [5]L. Wang, H. Zhang, and Y. Gao, “Effect of TiO2 nanoparticles on physical and mechanical properties of cement at low temperatures,” Adv. Mater. Sci. Eng., 2018, doi: 10.1155/2018/8934689. [6]Comisión de Normalización y de Fiscalización de Barreras Comerciales no Arancelares, Norma Técnica Peruana. Perú, 2013, p. 29. [7]ASTM Internacional, “ASTM C150,” 2021. https://www.astm.org/Database.Cart/Historical/C150-07-SP.htm. [8]M. Issa, “( current astm c150 / aashto m85 ) with limestone and process addition ( ASTM C465 / AASHTO M327 ) on the performance of concrete for pavement and Prepared By,” 2014. [9]S. Zailan, N. Mahmed, M. Abdullah, A. Sandu, and N. Shahedan, “Review on characterization and mechanical performance of self-cleaning concrete,” MATEC Web Conf., vol. 97, pp. 1–7, 2017, doi: 10.1051/matecconf/20179701022. [10]C. Chavarry, L. Chavarría, A. Valencia, E. Pereyra, J. Arieta, and C. Rengifo, “Hormigón reforzado con vidrio molido para controlar grietas y fisuras por contracción plástica,” Pro Sci., vol. 4, no. 31, pp. 31–41, 2020, doi: 10.29018/issn.2588-1000vol4iss31.2020pp31-41. [11]D. Tobaldi, “Materiali ceramici per edilizia con funzionalità fotocatalitica,” Università di Bologna, 2009. [12]Norme UNI, “Norma Italiana UNI 11259,” 2016. http://store.uni.com/catalogo/uni-11259-2008?josso_back_to=http://store.uni.com/josso-security-check.php&josso_cmd=login_optional&josso_partnerapp_host=store.uni.com. [13]E. Grebenisan, H. Szilagyi, A. Hegyi, C. Mircea, and C. Baera, “Directory lines regarding the desing and production of self-cleaning cementitious composites,” Sect. Green Build. Technol. Mater., vol. 19, no. 6, 2019. [14]M. Kaszynska, “The influence of TIO2 nanoparticles on the properties of self-cleaning cement mortar,” Int. Multidiscip. Sci. GeoConference SGEM, pp. 333–341, 2018.

On the Methods for Assessing the Resistance of Steels to Brittle Fracture

2021 ◽  
pp. 59-64
Author(s):  
A.P. Korchagin ◽  
◽  
K.A. Kuznetsov ◽  
A.M. Kuznetsov ◽  
S.I. Kirillov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Brittle Fracture ◽  
Impact Strength ◽  
Low Temperatures ◽  
Physical And Mechanical Properties ◽  
Correct Choice ◽  
Temperature Dependences ◽  
And Control ◽  
The Impact ◽  
Resistance To Brittle Fracture

The problem of assessing steels durability, their resistance to brittle fracture in the structures used in various branches of industry, remains relevant at the development of the new equipment and control of the old equipment. Standard strength calculations do not give a complete picture of the ability of steels due to their physical and mechanical properties to resist the formation and further development of defects and cracks under the action of actual stresses. The correct choice of a structural material for technical devices operating at low temperatures, knowledge of its characteristics of resistance to brittle fracture, understanding of brittle fracture mechanism at low temperatures and research in this area are of great importance. Since 1980s, JSC IrkutskNIIkhimmash systematically conducts the research works related to impact strength characteristics. These works are carried out in connection with the need for assessing the resistance to brittle fracture of metal of the equipment for storing oil products, vessels and pipelines, drill pipes and tubing, etc. As a result of many years of research, the authors accumulated significant experimental material in the form of temperature dependences of impact strength - both for the material of various types of blanks (sheets, pipes, forgings) in the state of delivery, and for the metal of technical devices elements after their operation of various duration. The main objective of the article is to assist specialists in establishing the correct choice of steel for the new or old structures in terms of their resistance to brittle fracture without conducting special studies. Specialists can select the closest steel analogue (on chemical composition, mechanical properties, and the type of product without making cuts from the structure or blanks for additional research), and set the numerical value of the impact strength, critical temperature of brittleness and the stress intensity factor for any temperature in the range from –40 to 20° С in order to use them in further calculations.

STRUCTURAL STABILITY, PHYSICAL AND MECHANICAL PROPERTIES OF EUTECTIC Li-Pb ALLOYS

1991 ◽  
pp. 944-948 ◽  
Author(s):  
G.M. Kalinin ◽  
B.S. Rodchenkov ◽  
A.V. Sidorenkov ◽  
Yu.S. Strebkov ◽  
A.S. Tanklevsky ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Structural Stability ◽  
Physical And Mechanical Properties

scholarly journals Physical and Mechanical Properties of Thermally-Modified Beech Wood Impregnated with Silver Nano-Suspension and Their Relationship with the Crystallinity of Cellulose

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1538 ◽  
Author(s):  
Siavash Bayani ◽  
Hamid R. Taghiyari ◽  
Antonios N. Papadopoulos
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Low Temperatures ◽  
Beech Wood ◽  
Treated Wood ◽  
Physical And Mechanical Properties ◽  
Thermal Modification ◽  
Crystalline Cellulose ◽  
Cross Linking ◽  
Amorphous Cellulose

The aim of this study was to investigate the physical and mechanical properties of thermally modified beech wood impregnated with silver nano-suspension and to examine their relationship with the crystallinity of cellulose. Specimens were impregnated with a 400 ppm nanosilver suspension (NS); at least, 90% of silver nano-particles ranged between 20 and 100 nano-meters. Heat treatment took place in a laboratory oven at three temperatures, namely 145, 165, and 185 °C. Physical properties and mechanical properties of treated wood demonstrated statistically insignificant fluctuations at low temperatures compared to control specimens. On the other hand, an increase of temperature to 185 °C had a significant effect on all properties. Physical properties (volumetric swelling and water absorption) and mechanical properties (MOR and MOE) of treated wood demonstrated statistically insignificant fluctuations at low temperatures compared to control specimens. This degradation ultimately resulted in significant decrease in MOR, impact strength, and physical properties. However, thermal modification at 185 °C did not seem to cause significant fluctuations in MOE and compression strength parallel to grain. As a consequence of the thermal modification, part of amorphous cellulose was changed to crystalline cellulose. At low temperatures an increased crystallinity caused some of the properties to be improved. Crystallinity also demonstrated a decrease in NS-HT185 in comparison to HT185 treatment. TCr indices in specimens thermally treated at 145 °C revealed a significant increase as a result of impregnation with nanosilver suspension. This improvement in TCr index resulted in a noticeable increase in MOR and MOE values. Other properties did not show significant fluctuations, suggesting that the effect of the increased crystallinity and cross-linking in lignin was more than the negative effect of the low cell-wall polymer degradation caused by thermal modification. Change of amorphous cellulose to crystalline cellulose, as well as cross-linking in lignin, partially ameliorated the negative effects of thermal degradation at higher temperatures and therefore, compression parallel to grain and modulus of elasticity did not decrease significantly. Overall, it can be concluded that increased crystallinity and cross-linking in lignin can compensate for some decreased properties caused by thermal modification, but it would be significantly dependent on the temperature under which modification is carried out. Impregnating specimens with silver nano-suspension prior to thermal modification enhanced the effects of thermal modification as a result of improved thermal conductivity.

The Influence of Iron on the Physical and Mechanical Properties of β-Nial

1994 ◽  
Vol 364 ◽  
Author(s):  
Y. J. Lim ◽  
K. T. Hong ◽  
V. Levit ◽  
M. J. Kaufmann
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Transmission Electron Microscopy ◽  
Electrical Resistivity ◽  
Magnetic Susceptibility ◽  
Low Temperatures ◽  
Physical And Mechanical Properties ◽  
The Other ◽  
Resistivity Data ◽  
Transmission Electron

AbstractThe influence of iron on the the microstructure and properties of B2 NiAl has been investigated using electrical resistivity, magnetic susceptibility, microhardness and transmission electron microscopy. The resistivity data suggest that quenched-in vacancies (1) enhance iron rearrangement at low temperatures (600–800 K) and (2) annihilate above 800 K. These effects depend strongly on Ni/Al ratio and are greatest for Ni/Al=1. It is also shown that these data correlate directly with the results obtained using the other experimental techniques.

Some physical and mechanical properties of uranium ? Zirconium alloys at low temperatures

1973 ◽  
Vol 34 (2) ◽  
pp. 111-114
Author(s):  
G. B. Fedorov ◽  
M. T. Zuev ◽  
E. A. Smirnov ◽  
A. E. Kissil'
Keyword(s):  
Mechanical Properties ◽  
Low Temperatures ◽  
Physical And Mechanical Properties ◽  
Zirconium Alloys

scholarly journals Research of the efficiency of the use of belite sludge for the device of monolithic layers of road clothes by the method of cold recycling

2020 ◽  
Vol 17 (6) ◽  
pp. 764-776
Author(s):  
A. A. Lytkin ◽  
G. В. Starkov ◽  
E. Ya. Wagner
Keyword(s):  
Mechanical Properties ◽  
Low Temperatures ◽  
Experimental Studies ◽  
Physical And Mechanical Properties ◽  
Laboratory Studies ◽  
Alumina Production ◽  
Cold Recycling

Introduction. The physical and mechanical properties of belite (nepheline) sludge, a large-tonnage waste of alumina production, are given. The scope of its application is shown in the construction, reconstruction and repair of roads and airfields.Materials and methods. The data of theoretical and laboratory studies on the use of ground nepheline sludge as a binder for strengthening asphalt granulate, including at low temperatures, without antifreeze additives. The optimal dosages of finely ground sludge for strengthening asphalt granulate 10–15℅ have been determined.Results. The results of the experimental studies were confirmed during the production check during the construction of the pilot section of the foundation made of sludge granulometric concrete. The direction of further research is determined.

Sign in / Sign up

Export Citation Format

Share Document