scholarly journals A testing method with steep impact voltage inspecting the internal defects in EMU roof cable termination

Author(s):  
Jixing Sun ◽  
Yunlong Lv ◽  
Fan Ding ◽  
Jiyong Liu ◽  
Qingyun Zhi ◽  
...  
Author(s):  
Van Viet Thien An

In the present study, the uniformity and potential internal defects of concrete elements in situ were assessed by using Ultrasonic Pulse Velocity (UPV) testing method according to TCVN 9357:2012. Thirteen cross beams with dimension of 4.8 x 1.5 x 1.5 m3 were selected to measure the pulse velocity. Three cross beams were used to check potential internal defects in concrete and 10 cross beams were used to assess the uniformity of concrete in the elements. The results showed that there is no potential internal defect with size over 100 mm in three tested beams and concrete quality of all tested beams is good with the coefficient of variation (CV) of ultrasonic pulse velocity results of all tested points is lower than 2%. Keywords: concrete; homogeneity; internal defects; ultrasonic pulse velocity.


2009 ◽  
Vol 29 (03) ◽  
pp. 285-290 ◽  
Author(s):  
K. E. Guyer

SummaryAntiplatelet therapy has demonstrated significant clinical benefit in the treatment of acute coronary syndrome. However, as with any treatment strategy it has been unable to prevent all cardiovascular events. This is far from surprising when considering the complexity of arterial thrombosis and more specifically platelet physiology. This lack of treatment success has provoked the introduction of various diagnostic tests and testing platforms with the intent of guiding and optimizing clinical treatment. Such tests have resulted in the generation of clinical data that suggest suboptimal response to antiplatelet agents such as aspirin and clopidogrel.In the case of both aspirin and clopidogrel, this suboptimal response has been termed resistance. Drug resistance would imply a lack of pharmacological response that has not been specifically investigated in many of the clinical studies performed to date. Rather, the term resistance has been used to describe various facets of platelet activation and aggregation relative to the testing method. Many of these measured parameters are not addressed in the therapeutic intent of the antiplatelet drug in question.


2020 ◽  
Vol 5 (1) ◽  
pp. 61
Author(s):  
Vadlan Febrian ◽  
Muhamad Rizki Ramadhan ◽  
Muhammad Faisal ◽  
Aries Saifudin

In this employee payroll application, if there is an error program there will be a loss for employees and the company. Losses for employees, if this application program error occurs then the salary reduction will experience delays due to the difficulty in the process of calculating employee salaries and employees will be late in receiving salaries. Losses for the company, if there is an error program in this application, the company will suffer losses if the employee wants a salary reduction quickly but the company cannot calculate quickly and accurately. In solving this problem, the authors use the black box testing method. Black box testing method is a test that sees the results of execution through test data and ensures the function of the software. Black box testing method has several testing techniques, namely Sample Testing, Boundary Value Analysis, Equivalence Partitions and others. From the testing techniques that have been mentioned, we use the Equivalence Partitions testing technique. Equivalence Partitions are tests that refer to data entry on the employee payroll application form, input will be tested and then put together based on the test function, both valid and invalid values. The expected results of this test are a payroll system for employees who are computerized, have standard rules in the process of developing the program so that it is easy to develop and maintain, and can minimize errors in processing salary calculations for employees.


Author(s):  
Siti Soleha ◽  
Fansi Onita Santoso ◽  
Zaim Elmubarok

Penelitian ini bertujuan untuk mengetahui besar persentase kesalahan penggunaan (jìnyìcí), mengetahui kesalahan apa saja yang dilakukan mahasiswa, menentukan cara untuk membedakan penggunaan (jìnyìcí) dan merumuskan solusi yang dapat dilakukan untuk mengurangi kesalahan penggunaan (jìnyìcí) tersebut. Pendekatan penelitian yang dilakukan adalah deskriptif kuantitatif. Populasi dan sampel pada penelitian ini adalah mahasiswa semester VI angkatan 2014 Prodi Pendidikan Bahasa Mandarin Universitas Negeri Semarang sebanyak 25 mahasiswa. Teknik pengumpulan data dilakukan dengan metode dokumentasi dan metode tes. Berdasarkan hasil penelitian diketahui persentase kesalahan penggunaan (jìnyìcí) adalah sebesar 28,4%. Kesalahan tersebut tergolong pada tingkat rendah, namun ada beberapa kesalahan yang perlu lebih diperhatikan yaitu kesalahan dalam penggunaan fungsi tata bahasa dan kesalahan dalam memahami makna. Cara membedakan penggunaan (jìnyìcí) dapat dilakukan mahasiswa dengan mempelajari fungsi tata bahasa kosakata (jìnyìcí) dan memahami makna kosakata (jìnyìcí). Solusi yang dapat dilakukan adalah mempelajari fungsi tata bahasa kosakata (jìnyìcí) secara keseluruhan dengan benar, memahami makna kosakata (jìnyìcí) secara spesifik, dan memperbanyak latihan membuat kalimat menggunakan kosakata (jìnyìcí).This study aims to identify mistake percentage in using (jìnyìcí), identify what mistakes conducted by students, determine how to differentiate the usage of (jìnyìcí), and formulate solution to reduce mistake in using (jìnyìcí). This study uses descriptive-quantitative approach. There are 25 sixth students of Mandarin Language Education Department in Universitas Negeri Semarang as population and sample. In addition, data is collected by documentation and testing method. Based on the analysis, there is 28,4% of mistake in using (jìnyìcí). This finding is categorized as low. However, there are some mistakes that need to be noted. For instance, mistake in using grammar and interpreting meaning. Furthermore, (jìnyìcí) can be differentiate by studying grammar of (jìnyìcí) and understand the meaning of (jìnyìcí). Finally, it is recommended to study the grammar of (jìnyìcí), specifically understand the meaning of (jìnyìcí) and increase the exercise to make sentences using (jìnyìcí).


2015 ◽  
Vol 7 (2) ◽  
pp. 1428-1439
Author(s):  
Khurshed Alam ◽  
Md. Sayeedur Rahman ◽  
Md. Mostafizur Rahman ◽  
S. M. Azaharul Islam

A powerful non-destructive testing (NDT) technique is adopted to study the internal defects and elemental distribution/homogeneity and porosity of aerated brick and EPS aggregate poly brick samples. In the present study the internal defects like homogeneity, porosity, elemental distribution, EPS aggregate and aerator distributor in the test samples have been observed by the measurement of gray value/optical density of the neutron radiographic images of these samples. From this measurement it is found that the neutron intensity/optical density variation with the pixel distance of the AOI of the NR images in both expanded polystyrene (EPS) aggregate poly brick and aerated brick samples comply almost same in nature with respect to the whole AOI but individually each AOI shows different nature from one AOI to another and it confirms that the elemental distribution within a AOI is almost homogeneous. Finally it was concluded that homogeneity, elemental distribution in the EPS aggregate poly brick sample is better than that of the aerated brick sample. 


2014 ◽  
Vol 6 (1) ◽  
pp. 27-42
Author(s):  
Keshia Anjelica ◽  
Albertus Fani Prasetyawan

The objective of this research is to examine the effect of profitability, firm age, firm size, audit quality, and leverage both partially and simultaneously towards earnings quality. The testing method used in this research is multiple regressions. The objects of this study are property, real estate and construction companies which were listed at Kompas 100 for the period 2010-2012. The samples are 15 companies determined based on purposive sampling. The data used in this study are secondary data such as financial statements and historical stock prices. The results of this study are (1) firm age has a negative significant effect on earnings quality, meanwhile firm size has a positive significant effect on earnings quality (2) profitability, audit quality, and leverage partially have an insignificant effect towards earnings quality (3) profitability, firm age, firm size, audit quality, and leverage simultaneously have a significant effect towards voluntary auditor switching. Keywords: ERC, earnings quality, profitability, firm age, firm size, audit quality, leverage.


2019 ◽  
Vol 4 (2) ◽  
pp. 176-183
Author(s):  
Ponco Wali

Testing repeat electronic scales with non-automatic scales technical requirements so far is fairly long if not using a calculator or computer. The aim of this research is to compare the repeatability testing method of electronic scales using methods according to the technical requirements of non-automatic scales and the Australian NMI method, both of which refer to OIML R76 in determining the validity or cancellation of electronic scales repeatability testing. This research method is done through repeat testing on 3 samples of electronic scales, then on each electronic scale 2 test methods are performed. The conclusion is that the electronic scales repeatability testing uses the non-automatic scales technical requirements method and the Australian NMI method has some differences although both refer to OIML R76. These differences include several points, namely the charge used, the method of adding additions, the formula for determining electronic scales, and different test results. The Australian NMI method is deemed to make it easier and more time efficient compared to the non-automatic weighing technical requirements method.


2006 ◽  
Vol 16 (1) ◽  
pp. 21-33 ◽  
Author(s):  
Ying-Hung Chuang ◽  
Ying-Ji Chuang ◽  
Ching-Yuan Lin
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document