Three-dimensional numerical solution of eddy currents in thin plates

1975 ◽  
Vol 122 (6) ◽  
pp. 681 ◽  
Author(s):  
C.J. Carpenter ◽  
M. Djurović
Keyword(s):  
Numerical Solution ◽  
Eddy Currents ◽  
Three Dimensional ◽  
Thin Plates

Fracture Mechanics of Thin Plates and Shells Under Combined Membrane, Bending, and Twisting Loads

2005 ◽  
Vol 58 (1) ◽  
pp. 37-48 ◽  
Author(s):  
Alan T. Zehnder ◽  
Mark J. Viz
Keyword(s):  
Fracture Mechanics ◽  
Plate Theory ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Crack Tip ◽  
Thin Plates ◽  
Element Analysis ◽  
Crack Tip Fields ◽  
Plates And Shells ◽  
Membrane Bending

The fracture mechanics of plates and shells under membrane, bending, twisting, and shearing loads are reviewed, starting with the crack tip fields for plane stress, Kirchhoff, and Reissner theories. The energy release rate for each of these theories is calculated and is used to determine the relation between the Kirchhoff and Reissner theories for thin plates. For thicker plates, this relationship is explored using three-dimensional finite element analysis. The validity of the application of two-dimensional (plate theory) solutions to actual three-dimensional objects is analyzed and discussed. Crack tip fields in plates undergoing large deflection are analyzed using von Ka´rma´n theory. Solutions for cracked shells are discussed as well. A number of computational methods for determining stress intensity factors in plates and shells are discussed. Applications of these computational approaches to aircraft structures are examined. The relatively few experimental studies of fracture in plates under bending and twisting loads are also reviewed. There are 101 references cited in this article.

Split Vibration Modes in Acoustically-Coupled Disk Stacks

1995 ◽  
Author(s):  
Jung-Ge Tseng ◽  
Jonathan Wickert
Keyword(s):  
Natural Frequencies ◽  
Three Dimensional ◽  
System Level ◽  
Thin Plates ◽  
Mode Shapes ◽  
Design Parameters ◽  
Phase System ◽  
Acoustic Coupling ◽  
Annular Plates ◽  
Vibration Model

Abstract Vibration of an array of stacked annular plates, in which adjacent plates couple weakly through an acoustic layer, is investigated through experimental and theoretical methods. Such acoustic coupling manifests itself through split natural frequencies, beating in the time responses of adjacent or separated plates, and system-level modes in which plates in the array vibrate in- or out-of-phase at closely-spaced frequencies. Laboratory measurements, including a technique in which the frequency response function of all in-phase modes but no out-of-phase modes, or visa versa, is measured, demonstrate the contribution of coupling to the natural frequency spectrum, and identify the combinations of design parameters for which it is important. For the lower modes of primary interest here, the natural frequencies of the out-of-phase system modes decrease as the air layer becomes thinner, while those of the in-phase mode remain sensibly constant at the in vacuo values. A vibration model comprising N classical thin plates that couple through the three-dimensional acoustic fields established in the annular cavities between plates is developed, and its results are compared with measurements of the natural frequencies and mode shapes.

Sign in / Sign up

Export Citation Format

Share Document