Analysis of continuous systems in the time domain

2016 ◽  
pp. 73-114
Keyword(s):  
Time Domain ◽  
Continuous Systems ◽  
The Time Domain

A non-linear model for elastic hysteresis in the time domain: Computational procedure

2020 ◽  
pp. 095440622098202
Author(s):  
MMS Dwaikat ◽  
C Spitas ◽  
V Spitas
Keyword(s):  
Time Domain ◽  
Mechanical Energy ◽  
Numerical Procedure ◽  
Time History ◽  
Computational Procedure ◽  
Continuous Systems ◽  
Full Time ◽  
Proposed Model ◽  
History Of ◽  
The Time Domain

Hysteretic damping of a material or structure loaded within its elastic region is the dissipation of mechanical energy at a rate independent of the frequency of vibration while at the same time directly proportional to the square of the displacement. Generally, reproducing this frequency-independent damping can be computationally complex and requires prior knowledge of the system’s natural frequencies or the full time history of the system’s response. In this paper, a new model and numerical procedure are proposed whereby hysteretic material damping is achieved in the time domain. The proposed procedure is developed based on modifying the viscous model through a correction factor calculated exclusively using the local response. The superiority of the proposed approach lies in its ability to capture material hysteresis without any knowledge of the eigen- or modal frequencies of the system and without knowledge of the past time history of the system’s response or the characteristics of any excitation forces. A numerical procedure is also presented for implementing the proposed model in vibration analysis. The simplicity of the approach enables its generalisation to continuous systems and to systems of multi-degrees of freedom as demonstrated herein. The proposed model is presented as a correction to the viscous damping model which makes it attractive to implement into commercial finite element package using user-defined element subroutines as demonstrated in this study.

Apodisation in the time domain

1992 ◽  
Vol 2 (4) ◽  
pp. 615-620
Author(s):  
G. W. Series
Keyword(s):  
Time Domain ◽  
The Time Domain

JOINT INTERPRETATION OF AIRBORNE ELECTROMAGNETIC DATA IN THE TIME DOMAIN AND FREQUENCY DOMAIN

2018 ◽  
Vol 12 (7-8) ◽  
pp. 76-83
Author(s):  
E. V. KARSHAKOV ◽  
J. MOILANEN
Keyword(s):  
Fourier Transform ◽  
Frequency Domain ◽  
Time Domain ◽  
Frequency Interval ◽  
Single Spectrum ◽  
Simultaneous Inversion ◽  
Homogeneous Half Space ◽  
Time Domain Data ◽  
The Time Domain

Тhe advantage of combine processing of frequency domain and time domain data provided by the EQUATOR system is discussed. The heliborne complex has a towed transmitter, and, raised above it on the same cable a towed receiver. The excitation signal contains both pulsed and harmonic components. In fact, there are two independent transmitters operate in the system: one of them is a normal pulsed domain transmitter, with a half-sinusoidal pulse and a small "cut" on the falling edge, and the other one is a classical frequency domain transmitter at several specially selected frequencies. The received signal is first processed to a direct Fourier transform with high Q-factor detection at all significant frequencies. After that, in the spectral region, operations of converting the spectra of two sounding signals to a single spectrum of an ideal transmitter are performed. Than we do an inverse Fourier transform and return to the time domain. The detection of spectral components is done at a frequency band of several Hz, the receiver has the ability to perfectly suppress all sorts of extra-band noise. The detection bandwidth is several dozen times less the frequency interval between the harmonics, it turns out thatto achieve the same measurement quality of ground response without using out-of-band suppression you need several dozen times higher moment of airborne transmitting system. The data obtained from the model of a homogeneous half-space, a two-layered model, and a model of a horizontally layered medium is considered. A time-domain data makes it easier to detect a conductor in a relative insulator at greater depths. The data in the frequency domain gives more detailed information about subsurface. These conclusions are illustrated by the example of processing the survey data of the Republic of Rwanda in 2017. The simultaneous inversion of data in frequency domain and time domain can significantly improve the quality of interpretation.

scholarly journals Broadband spectroscopy of astrophysical ice analogues

2019 ◽  
Vol 629 ◽  
pp. A112 ◽  
Author(s):  
B. M. Giuliano ◽  
A. A. Gavdush ◽  
B. Müller ◽  
K. I. Zaytsev ◽  
T. Grassi ◽  
...  
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Time Domain ◽  
Complex Refractive Index ◽  
Far Infrared ◽  
Infrared Region ◽  
Thz Radiation ◽  
The Real ◽  
Thz Range ◽  
The Time Domain

Context. Reliable, directly measured optical properties of astrophysical ice analogues in the infrared and terahertz (THz) range are missing from the literature. These parameters are of great importance to model the dust continuum radiative transfer in dense and cold regions, where thick ice mantles are present, and are necessary for the interpretation of future observations planned in the far-infrared region. Aims. Coherent THz radiation allows for direct measurement of the complex dielectric function (refractive index) of astrophysically relevant ice species in the THz range. Methods. We recorded the time-domain waveforms and the frequency-domain spectra of reference samples of CO ice, deposited at a temperature of 28.5 K and annealed to 33 K at different thicknesses. We developed a new algorithm to reconstruct the real and imaginary parts of the refractive index from the time-domain THz data. Results. The complex refractive index in the wavelength range 1 mm–150 μm (0.3–2.0 THz) was determined for the studied ice samples, and this index was compared with available data found in the literature. Conclusions. The developed algorithm of reconstructing the real and imaginary parts of the refractive index from the time-domain THz data enables us, for the first time, to determine the optical properties of astrophysical ice analogues without using the Kramers–Kronig relations. The obtained data provide a benchmark to interpret the observational data from current ground-based facilities as well as future space telescope missions, and we used these data to estimate the opacities of the dust grains in presence of CO ice mantles.

EPR light beams and non-Gaussian quantum distributions in the time domain

2009 ◽  
Vol 6 (7) ◽  
pp. 577-580
Author(s):  
N. H. Adamyan ◽  
H. H. Adamyan ◽  
G. Yu. Kryuchkyan
Keyword(s):  
Time Domain ◽  
Non Gaussian ◽  
The Time Domain ◽  
Light Beams ◽  
Quantum Distributions

Separating Multiple Moving Sources by Microphone Array Signals for Wayside Acoustic Fault Diagnosis

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Wei Xiong ◽  
Qingbo He ◽  
Zhike Peng
Keyword(s):  
Fault Diagnosis ◽  
Time Domain ◽  
Feature Matching ◽  
Matching Pursuit ◽  
Microphone Array ◽  
Time Frequency ◽  
Moving Sources ◽  
The Time Domain ◽  
Envelope Spectrum ◽  
Threshold Setting

Wayside acoustic defective bearing detector (ADBD) system is a potential technique in ensuring the safety of traveling vehicles. However, Doppler distortion and multiple moving sources aliasing in the acquired acoustic signals decrease the accuracy of defective bearing fault diagnosis. Currently, the method of constructing time-frequency (TF) masks for source separation was limited by an empirical threshold setting. To overcome this limitation, this study proposed a dynamic Doppler multisource separation model and constructed a time domain-separating matrix (TDSM) to realize multiple moving sources separation in the time domain. The TDSM was designed with two steps of (1) constructing separating curves and time domain remapping matrix (TDRM) and (2) remapping each element of separating curves to its corresponding time according to the TDRM. Both TDSM and TDRM were driven by geometrical and motion parameters, which would be estimated by Doppler feature matching pursuit (DFMP) algorithm. After gaining the source components from the observed signals, correlation operation was carried out to estimate source signals. Moreover, fault diagnosis could be carried out by envelope spectrum analysis. Compared with the method of constructing TF masks, the proposed strategy could avoid setting thresholds empirically. Finally, the effectiveness of the proposed technique was validated by simulation and experimental cases. Results indicated the potential of this method for improving the performance of the ADBD system.

scholarly journals Diagnostically Oriented Experiments and Modelling of Switched Reluctance Motor Dynamic Eccentricity

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3857
Author(s):  
Jakub Lorencki ◽  
Stanisław Radkowski ◽  
Szymon Gontarz
Keyword(s):  
Time Domain ◽  
Test Bench ◽  
Switched Reluctance Motor ◽  
Industrial Applications ◽  
Switched Reluctance ◽  
Static And Dynamic Analysis ◽  
Geometry Model ◽  
Reluctance Motor ◽  
Dynamic Eccentricity ◽  
The Time Domain

The article compares the results of experimental and modelling research of switched reluctance motor at two different operational states: one proper and one with mechanical fault, i.e., with dynamic eccentricity of the rotor. The experiments were carried out on a test bench and then the results were compared with mathematical modelling of quasi-static and dynamic analysis of 2D geometry model. Finally, it was examined how the operation with dynamic eccentricity fault of the motor affected its main physical parameter—the phase current. The analysis was presented in the frequency domain using the Fast Fourier Transform (FFT); however, individual current waveforms in the time domain are also shown for comparison. Applying results of the research could increase reliability of the maintenance of SRM and enhance its application in vehicles for special purposes as well as its military and industrial applications.

scholarly journals Time and Frequency Domain Dynamic Analysis of Offshore Mooring

2021 ◽  
Vol 9 (7) ◽  
pp. 781
Author(s):  
Shi He ◽  
Aijun Wang
Keyword(s):  
Dynamic Analysis ◽  
Frequency Domain ◽  
Time Domain ◽  
Linearization Method ◽  
Euler Method ◽  
Single Component ◽  
Hydrodynamic Drag ◽  
Lumped Mass ◽  
Mooring Lines ◽  
The Time Domain

The numerical procedures for dynamic analysis of mooring lines in the time domain and frequency domain were developed in this work. The lumped mass method was used to model the mooring lines. In the time domain dynamic analysis, the modified Euler method was used to solve the motion equation of mooring lines. The dynamic analyses of mooring lines under horizontal, vertical, and combined harmonic excitations were carried out. The cases of single-component and multicomponent mooring lines under these excitations were studied, respectively. The case considering the seabed contact was also included. The program was validated by comparing with the results from commercial software, Orcaflex. For the frequency domain dynamic analysis, an improved frame invariant stochastic linearization method was applied to the nonlinear hydrodynamic drag term. The cases of single-component and multicomponent mooring lines were studied. The comparison of results shows that frequency domain results agree well with nonlinear time domain results.

Sign in / Sign up

Export Citation Format

Share Document