scholarly journals Tuneable resonance frequency vibrational energy harvester with electret‐embedded variable capacitor

2021 ◽  
Author(s):  
Xingchen Ma ◽  
Xiaoya Yang ◽  
Heinz von Seggern ◽  
Ying Dai ◽  
Pengfei He ◽  
...  
Keyword(s):  
Resonance Frequency ◽  
Energy Harvester ◽  
Vibrational Energy ◽  
Variable Capacitor

scholarly journals Fluorinated Polyethylene Propylene Ferroelectrets with an Air-Filled Concentric Tunnel Structure: Preparation, Characterization, and Application in Energy Harvesting

Micromachines ◽  
2020 ◽  
Vol 11 (12) ◽  
pp. 1072
Author(s):  
Xi Zuo ◽  
Li Chen ◽  
Wenjun Pan ◽  
Xingchen Ma ◽  
Tongqing Yang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Resonance Frequency ◽  
Power Output ◽  
Energy Harvester ◽  
Vibrational Energy ◽  
Piezoelectric Response ◽  
Tunnel Structure ◽  
Energy Harvesters ◽  
The Earth ◽  
Seismic Mass

Fluorinated polyethylene propylene (FEP) bipolar ferroelectret films with a specifically designed concentric tunnel structure were prepared by means of rigid-template based thermoplastic molding and contact polarization. The properties of the fabricated films, including the piezoelectric response, mechanical property, and thermal stability, were characterized, and two kinds of energy harvesters based on such ferroelectret films, working in 33- and 31-modes respectively, were investigated. The results show that the FEP films exhibit significant longitudinal and radial piezoelectric activities, as well as superior thermal stability. A quasi-static piezoelectric d33 coefficient of up to 5300 pC/N was achieved for the FEP films, and a radial piezoelectric sensitivity of 40,000 pC/N was obtained in a circular film sample with a diameter of 30 mm. Such films were thermally stable at 120 °C after a reduction of 35%. Two types of vibrational energy harvesters working in 33-mode and 31-mode were subsequently designed. The results show that a power output of up to 1 mW was achieved in an energy harvester working in 33-mode at a resonance frequency of 210 Hz, referring to a seismic mass of 33.4 g and an acceleration of 1 g (g is the gravity of the earth). For a device working in 31-mode, a power output of 15 μW was obtained at a relatively low resonance frequency of 26 Hz and a light seismic mass of 1.9 g. Therefore, such concentric tunnel FEP ferroelectric films provide flexible options for designing vibrational energy harvesters working either in 33-mode or 31-mode to adapt to application environments.

scholarly journals Electromagnetic Vibration Energy Harvester with Tunable Resonance Frequency Based on Stress Modulation of Flexible Springs

Micromachines ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1130
Author(s):  
Yunjia Li ◽  
Chenyuan Zhou ◽  
Qi Cao ◽  
Xinyi Wang ◽  
Dayong Qiao ◽  
...  
Keyword(s):  
Resonance Frequency ◽  
Small Volume ◽  
Energy Harvester ◽  
Vibrational Energy ◽  
Frequency Tuning ◽  
Axial Stress ◽  
Compact Structure ◽  
Vibration Energy Harvester ◽  
Electromagnetic Vibration ◽  
Natural Resonance Frequency

This paper presents a compact electromagnetic vibrational energy harvester (EVEH) with tunable resonance frequency. The resonance frequency of the EVEH is tuned by adjusting the axial stress in the flexible polymeric springs, which is realized by physically pulling and pushing the springs. The stress tuning functionality is realized with a compact structure with small volume. The total frequency tuning range of the proposed EVEH is 56 Hz (74 Hz–130 Hz), which is 64% of the natural resonance frequency of the EVEH (88 Hz). It is found that the tensile stress increases the resonance frequency of the EVEH, while the compressive stress firstly reduces the resonance frequency and then increases the resonance frequency due to buckling.

Simply supported FPEDs connected by springs for broadband energy harvesting

2020 ◽  
Vol 64 (1-4) ◽  
pp. 201-210
Author(s):  
Yoshikazu Tanaka ◽  
Satoru Odake ◽  
Jun Miyake ◽  
Hidemi Mutsuda ◽  
Atanas A. Popov ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Evaluation Method ◽  
Energy Harvester ◽  
Vibrational Energy ◽  
Functional Materials ◽  
Vibration Energy ◽  
Theoretical Evaluation ◽  
Vibration Energy Harvester ◽  
Polyvinylidene Difluoride ◽  
Simply Supported

Energy harvesting methods that use functional materials have attracted interest because they can take advantage of an abundant but underutilized energy source. Most vibration energy harvester designs operate most effectively around their resonant frequency. However, in practice, the frequency band for ambient vibrational energy is typically broad. The development of technologies for broadband energy harvesting is therefore desirable. The authors previously proposed an energy harvester, called a flexible piezoelectric device (FPED), that consists of a piezoelectric film (polyvinylidene difluoride) and a soft material, such as silicon rubber or polyethylene terephthalate. The authors also proposed a system based on FPEDs for broadband energy harvesting. The system consisted of cantilevered FPEDs, with each FPED connected via a spring. Simply supported FPEDs also have potential for broadband energy harvesting, and here, a theoretical evaluation method is proposed for such a system. Experiments are conducted to validate the derived model.

A Fluidic Vibrational Energy Harvester for Implantable Medical Device Applications

2017 ◽  
Vol 137 (6) ◽  
pp. 152-158
Author(s):  
Satoshi Inoue ◽  
Takuya Takahashi ◽  
Momoko Kumemura ◽  
Kazunori Ishibashi ◽  
Hiroyuki Fujita ◽  
...  
Keyword(s):  
Medical Device ◽  
Energy Harvester ◽  
Vibrational Energy ◽  
Implantable Medical Device ◽  
Device Applications

Scavenging vibrational energy with a novel bistable electromagnetic energy harvester

2020 ◽  
Vol 29 (2) ◽  
pp. 025022 ◽  
Author(s):  
Bo Yan ◽  
Ning Yu ◽  
Lu Zhang ◽  
Hongye Ma ◽  
Chuanyu Wu ◽  
...  
Keyword(s):  
Energy Harvester ◽  
Vibrational Energy ◽  
Electromagnetic Energy

Development of a PMN-PT/PDMS vibrational energy harvester

2008 ◽  
Author(s):  
Kee S. Moon ◽  
Alex Mathers ◽  
Jingang Yi
Keyword(s):  
Energy Harvester ◽  
Vibrational Energy

scholarly journals Double-Deck Metal Solenoids 3D Integrated in Silicon Wafer for Kinetic Energy Harvester

Micromachines ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 74
Author(s):  
Nianying Wang ◽  
Ruofeng Han ◽  
Changnan Chen ◽  
Jiebin Gu ◽  
Xinxin Li
Keyword(s):  
Kinetic Energy ◽  
Power Density ◽  
Energy Harvester ◽  
High Efficiency ◽  
Vibrational Energy ◽  
Average Power ◽  
Wafer Level ◽  
Peak Voltage ◽  
Silicon Mold ◽  
Casting Technique

A silicon-chip based double-deck three-dimensional (3D) solenoidal electromagnetic (EM) kinetic energy harvester is developed to convert low-frequency (<100 Hz) vibrational energy into electricity with high efficiency. With wafer-level micro electro mechanical systems (MEMS) fabrication to form a metal casting mold and the following casting technique to rapidly (within minutes) fill molten ZnAl alloy into the pre-micromachined silicon mold, the 300-turn solenoid coils (150 turns for either inner solenoid or outer solenoid) are fabricated in silicon wafers for saw dicing into chips. A cylindrical permanent magnet is inserted into a pre-etched channel for sliding upon external vibration, which is surrounded by the solenoids. The size of the harvester chip is as small as 10.58 mm × 2.06 mm × 2.55 mm. The internal resistance of the solenoids is about 17.9 Ω. The maximum peak-to-peak voltage and average power output are measured as 120.4 mV and 43.7 μW. The EM energy harvester shows great improvement in power density, which is 786 μW/cm3 and the normalized power density is 98.3 μW/cm3/g. The EM energy harvester is verified by experiment to be able to generate electricity through various human body movements of walking, running and jumping. The wafer-level fabricated chip-style solenoidal EM harvesters are advantageous in uniform performance, small size and volume applications.

A Miniature Mechanical-Piezoelectric-Configured Three-Axis Vibrational Energy Harvester

2015 ◽  
Vol 15 (10) ◽  
pp. 5601-5615 ◽  
Author(s):  
Chiao-Fang Hung ◽  
Tien-Kan Chung ◽  
Po-Chen Yeh ◽  
Chin-Chung Chen ◽  
Chieh-Min Wang ◽  
...  
Keyword(s):  
Energy Harvester ◽  
Vibrational Energy

A Novel Broadband Vibration Energy Harvester

2014 ◽  
Vol 644-650 ◽  
pp. 3560-3563
Author(s):  
Yu Liu ◽  
Xiao Yan He ◽  
Shen Liu ◽  
Ying Wu ◽  
Yi Ou
Keyword(s):  
Resonance Frequency ◽  
Energy Harvester ◽  
Engineering Application ◽  
Low Frequency ◽  
Structure Design ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Collector Efficiency ◽  
Energy Acquisition ◽  
Mode Energy

A single resonance frequency is the main factor of limiting vibration energy collector efficiency. In this paper, the multi degree of freedom oscillation adjusting bandwidth scheme is reported, designing a kind of new broadband vibration energy harvester, which has multi-mode energy acquisition, multi freedom vibration and broadband characteristics. Firstly, Broadband energy collector structure design. Secondly, Combining with the main vibration form, using the ANSYS carried out a detailed analysis of its working model. Finally, designing the prototype and doing some experimental verification, the results show that the designed energy collector with low frequency and wideband energy acquisition performance, the frequency domain of energy collection is 57.6 to 69.45HZ ,which break through the bottleneck of traditional single resonance frequency of energy acquisition, has a high value of theory and engineering application.

Sign in / Sign up

Export Citation Format

Share Document