Improving microstrip patch antenna performance using EBG substrates

2006 ◽  
Vol 153 (6) ◽  
pp. 558 ◽  
Author(s):  
D. Qu ◽  
L. Shafai ◽  
A. Foroozesh
Keyword(s):  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Microstrip Patch ◽  
Antenna Performance

scholarly journals Microstrip patch antenna with metamaterial using superstrate technique for wireless communication

2021 ◽  
Vol 10 (4) ◽  
pp. 2055-2061
Author(s):  
Rasha Mahdi Salih ◽  
Ali Khalid Jassim
Keyword(s):  
Wireless Communications ◽  
Reflection Coefficient ◽  
Wireless Communication ◽  
Patch Antenna ◽  
Relative Permittivity ◽  
Microstrip Antenna ◽  
Microstrip Patch Antenna ◽  
Antenna Gain ◽  
Microstrip Patch ◽  
Antenna Performance

This work builds a metamaterial (MTM) superstrate loaded on a patch of microstrip antenna for wireless communications. The MTM superstrate is made up of four G-shaped resonators on FR-4 substrate with a relative permittivity of 4.4 and has a total area of (8×16) mm2, and is higher than the patch. The MTM superstrate increases antenna gain while also raising the input reflection coefficient. When it is 9 mm above the patch, the gain increased from 3.28 dB to 6.02 dB, and when it is 7 mm above the patch, the input reflection coefficient was enhanced from -31.217 dB to -45.8 dB. When the MTM superstrate loaded antenna was compared to the traditional unloaded antenna, it was discovered that metamaterials have a lot of potential for improving antenna performance.

Multidirectional Circular Microstrip Patch Antenna Strain Sensor

2011 ◽  
Author(s):  
Ali Daliri ◽  
Chun H. Wang ◽  
Sabu John ◽  
Amir Galehdar ◽  
Wayne S. T. Rowe ◽  
...  
Keyword(s):  
Patch Antenna ◽  
Strain Sensor ◽  
Microstrip Patch Antenna ◽  
Strain Sensors ◽  
Current Sensor ◽  
Patch Antennas ◽  
Microstrip Patch Antennas ◽  
Microstrip Patch ◽  
Antenna Performance ◽  
Software Packages

In this paper, a new design for microstrip patch antenna strain sensors is proposed. The new antenna sensor works based on the meandered microstrip patch antennas. It is threefold more sensitive than previously proposed circular microstrip patch antenna strain sensors. Also, the overall physical dimension of the new antenna sensor is reduced by the factor of five. The current sensor is able to detect strain in all directions. In order to design the antenna sensor, two available commercial FEM software packages ANSYS™ and HFSS™ are used. Both experimental and FEM results corroborate the multidirectional feature of the new antenna sensor. Also, the effect of the hole size in the structure (for coaxial connection to the antenna) on the antenna performance has been studied. Based on the results obtained, the antenna sensor can be recommended for use in structural health monitoring for strain-based damage detection in aerospace structures.

A Novel-Shaped Reduced Size FSS-Based Broadband High Gain Microstrip Patch Antenna for WiMAX/WLAN/ISM/X-Band Applications

2021 ◽  
pp. 2150290
Author(s):  
Kalyan Mondal
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Ground Plane ◽  
High Gain ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Antenna Structure ◽  
Microstrip Patch ◽  
Antenna Performance ◽  
Peak Gain

In this work, a broadband high gain frequency selective surface (FSS)-based microstrip patch antenna is proposed. The dimensions of the microstrip antenna and proposed FSS are [Formula: see text] and [Formula: see text]. A broadband high gain reference antenna has been selected to improve antenna performance. The reference antenna offers 1.2[Formula: see text]GHz bandwidth with 6.03[Formula: see text]dBi peak gain. Some modifications have been done on the patch and ground plane to enhance the bandwidth and gain. The impedance bandwidth of 7.70[Formula: see text]GHz (3.42–11.12[Formula: see text]GHz) with 4.9 dBi peak gain is achieved by the microstrip antenna without FSS. The antenna performance is improved by using FSS beneath the antenna structure. The maximum impedance bandwidth of 7.70[Formula: see text]GHz (3.32–11.02[Formula: see text]GHz) and peak gain of 8.6[Formula: see text]dBi are achieved by the proposed antenna with FSS. Maximum co- and cross-polarization differences are 21[Formula: see text]dB. The simulation and measurement have been done using Ansoft Designer software and vector network analyzer. The measured results are in good parity with the simulated one.

Microstrip patch antenna performance analysis with Defected Ground structures: A review

2020 ◽  
Vol 1 (1) ◽  
pp. 15-21
Author(s):  
Amandeep Kaur ◽  
Amandeep Kaur
Keyword(s):  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Extensive Literature ◽  
Operational Parameters ◽  
Microstrip Patch ◽  
Antenna Performance ◽  
Compact Size ◽  
Microelectronics Fabrication ◽  
Defected Ground Structures ◽  
Ground Structures

Over last few decades, wireless communication system has sought more attention and plays predominant role in different areas for human personal and commercial applications. Day by day, with advancements in technology, wireless gadgets got more compact due to microelectronics fabrication and integration techniques. So, such applications put great demand over new design specifications on antenna structures used in transmitter and receiver for radio wave communication. In wireless applications depending upon, frequency bands and bandwidth requirements numerous compact antenna structures are used with improved efficiency. Microstrip patch antennas are highly regarded due to its compact size, easy integration with microwave circuits. In study of patch antenna, Defected Ground structures gain popularity these days due to its various benefits to enhance antenna performance. This research article, provides extensive literature survey over use of Defected Ground Structures (DGS) in microstrip patch antenna with its design consequences. This article also explores the enhancement in antenna parameters with implementation of DGS’s. DGS concept is used in microstrip patch antenna and microwave engineering for performance improvement of these devices. DGS can be merged with other techniques to enhance antenna operational parameters like gain, bandwidth, VSWR and spurious radiations.

scholarly journals Simulation of Rectangular Microstrip Patch Antenna using ANSYS

2019 ◽  
Vol 8 (6) ◽  
pp. 5145-5149
Keyword(s):  
Patch Antenna ◽  
Communication Systems ◽  
Return Loss ◽  
Satellite Communication ◽  
Microstrip Patch Antenna ◽  
Head Model ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Antenna Performance ◽  
Rectangular Microstrip Patch Antenna

This paper presents the design and simulation of a rectangular microstrip patch antenna with enhanced results. Antennas are playing the most important key role in wireless communication systems and especially microstrip patch antenna is the simplest and best form for mobile communication systems. Therefore, the design of antenna for mobile satellite communication and space to earth communication is described in this proposed work. The working of rectangular micro strip patch antenna is studied and the effect of height of the substrate on antenna performance is analyzed and the results are plotted. It has been noticed that the height of substrate should be neither small nor large. The effect of inserting a slot in the patch is also observed in this paper. Return Loss results are plotted for the designed structure and it is noticed that return loss is almost doubled by inserting a slot. Further two symmetrical slots are inserted in the patch and the respective results are plotted. Insertion of two slots gave multiple operating frequencies to the antenna with a compromise of s11. The simulation of proposed structures of antennas is done using ANSYS HFSS (high-frequency structure simulator) which is commercially used as a finite element method solver for electromagnetic structures. A sphere with human brain characteristics is created and average SAR (specific absorption ratio) is plotted on the head model. The proposed antenna has enhanced return loss of -52dB and VSWR of 1.005 at 2.24GHz. This work also introduces multiple operating frequencies using two slots of same size.

scholarly journals A Circular Coplanar Waveguide Fed Microstrip Patch Antenna with Modified Triangular Ground for UWB Applications

2019 ◽  
Vol 8 (9S) ◽  
pp. 170-174
Keyword(s):  
Patch Antenna ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Stop Band ◽  
Microstrip Patch Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Antenna Structure ◽  
Microstrip Patch ◽  
Antenna Performance

This research article gives a detailed insight of the design, simulation of a compact circular shaped microstrip patch antenna that is fed using a coplanar waveguide feed (CPW for practical wireless communication applications). The antenna is typically designed for Ultra wideband (1.46-6GHz), Bluetooth (2.4GHz), ZIGBEE (2.4GHz), WLAN (5.15- 5.35 GHz and 5.725- 5.825), Wi-Fi (2.4-2.485GHz) and HIPERLAN-2(5.15 - 5.35 GHz and 5.470 -5.725GHz) wireless applications with stop band characteristics for the H (partial C band). The proposed antenna has an overall packaged structure dimensions of 78 x75 x1.605 mm3 and is fabricated on FR4 substrate as a circular patch antenna with a coplanar ground .The commercially available laminate FR4 substrate that is used has a dielectric constant of 4.4, height of 1.6mm and a loss tangent of 0.0024.The prospective antenna shows a simulated impedance bandwidth of 4.54 GHz. The coplanar waveguide feeding used with this antenna helps in improving antenna performance in terms of its impedance bandwidth as this geometry helps in creating multiple current loops at the antenna structure, thereby exciting nearby frequencies that merge to show a broadband of operation. The antenna’s operational bandwidth is also improved by the concept of modified ground, in which triangular and rectangular shapes are added symmetrically on both sides of ground plane that provide a better fringing effect and hence an improved bandwidth.

Sign in / Sign up

Export Citation Format

Share Document