Hybrid method of determining the transient stability margin of a power system

1996 ◽  
Vol 143 (1) ◽  
pp. 27 ◽  
Author(s):  
M.H. Haque
Keyword(s):  
Power System ◽  
Hybrid Method ◽  
Transient Stability ◽  
Stability Margin

scholarly journals Power System Transient Stability Assessment Based on Snapshot Ensemble LSTM Network

2021 ◽  
Vol 13 (12) ◽  
pp. 6953
Author(s):  
Yixing Du ◽  
Zhijian Hu
Keyword(s):  
Power Systems ◽  
Power System ◽  
Transient Stability ◽  
Short Term Memory ◽  
Risk Function ◽  
Stability Margin ◽  
Risk Level ◽  
Stability Assessment ◽  
Lstm Network ◽  
Hierarchical Assessment

Data-driven methods using synchrophasor measurements have a broad application prospect in Transient Stability Assessment (TSA). Most previous studies only focused on predicting whether the power system is stable or not after disturbance, which lacked a quantitative analysis of the risk of transient stability. Therefore, this paper proposes a two-stage power system TSA method based on snapshot ensemble long short-term memory (LSTM) network. This method can efficiently build an ensemble model through a single training process, and employ the disturbed trajectory measurements as the inputs, which can realize rapid end-to-end TSA. In the first stage, dynamic hierarchical assessment is carried out through the classifier, so as to screen out credible samples step by step. In the second stage, the regressor is used to predict the transient stability margin of the credible stable samples and the undetermined samples, and combined with the built risk function to realize the risk quantification of transient angle stability. Furthermore, by modifying the loss function of the model, it effectively overcomes sample imbalance and overlapping. The simulation results show that the proposed method can not only accurately predict binary information representing transient stability status of samples, but also reasonably reflect the transient safety risk level of power systems, providing reliable reference for the subsequent control.

scholarly journals Adaptive Armature Resistance Control of Virtual Synchronous Generators to Improve Power System Transient Stability

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2365
Author(s):  
Daniel Carletti ◽  
Arthur Eduardo Alves Amorim ◽  
Thiago Silva Amorim ◽  
Domingos Sávio Lyrio Simonetti ◽  
Jussara Farias Fardin ◽  
...  
Keyword(s):  
Adaptive Control ◽  
Power System ◽  
Transient Stability ◽  
Short Circuit ◽  
Stability Margin ◽  
Synchronous Generator ◽  
Synchronous Generators ◽  
Resistance Change ◽  
Clearing Time ◽  
Fault Current Limiters

The growing number of renewable energy plants connected to the power system through static converters have been pushing the development of new strategies to ensure transient stability of these systems. The virtual synchronous generator (VSG) emerged as a way to contribute to the system stabilization by emulating the behavior of traditional synchronous machines in the power converters operation. This paper proposes a modification in the VSG implementation to improve its contribution to the power system transient stability. The proposal is based on the virtualization of the resistive superconducting fault current limiters’ (SFCL) behavior through an adaptive control that performs the VSG armature resistance change in short-circuit situations. A theoretical analysis of the problem is done based on the equal-area criterion, simulation results are obtained using PSCAD, and experimental results are obtained in a Hardware-In-the-Loop (HIL) test bench to corroborate the proposal. Results show an increase in the system transient stability margin, with an increase in the fault critical clearing time (CCT) for all virtual resistance values added by the adaptive control to the VSG operation during the short-circuit.

scholarly journals Enhancement of Power System Transient Stability By Fractional Order Controlled STATCOM Tuned By PSO

2018 ◽  
Vol 7 (4.24) ◽  
pp. 163
Author(s):  
R.S. Srinivas ◽  
P.V.Ramana Rao
Keyword(s):  
Power System ◽  
Fractional Order ◽  
Transient Stability ◽  
Stability Margin ◽  
Computational Effort ◽  
Static Synchronous Compensator ◽  
Facts Controllers ◽  
Angle Stability ◽  
Rotor Angle Stability ◽  
The Stability

This paper discusses the application of Fractional order PI controlled Static synchronous compensator for improvement rotor angle stability of inter connected power system. FACTS Controllers plays important role in enhancing the power system stability.Besides improving the stability margin of the power system it also aids the damping of inter area power oscillations. In the present work STATCOM is connected in multimachine power system .The dynamic response of the STATCOM is controlled by using fractional order controllers.The controller gains of the fractional controller are tuned by using PSO algorithm.It gives acceptable solutions to continuous non-linear systems with less computational effort. The performance of the proposed controller has been compared with integer order PI controllers at different locations of fault. In this paper a 3 machine 9 bus WSSC test power system is considered and simulated in MATLAB/SIMULINK.

Power System Transient Stability Analysis via Second-Order Non-Uniform Kuramoto Model

2014 ◽  
Vol 960-961 ◽  
pp. 1054-1057
Author(s):  
Liu Yang ◽  
Yu Feng Guo ◽  
Ning Chen ◽  
Min Hui Qian ◽  
Xiao Ping Xue ◽  
...  
Keyword(s):  
Stability Analysis ◽  
Power System ◽  
Transient Stability ◽  
Stable Equilibrium ◽  
Stability Margin ◽  
Second Order ◽  
Kuramoto Model ◽  
Trapping Region ◽  
Novel Approach ◽  
Transient Stability Analysis

Based on frequency synchronization theory of the second-order non-uniform Kuramoto model, a novel approach for power system transient stability analysis is put forward by establishing the correspondence between the classic power system model and the second-order non-uniform Kuramoto model. This method relates network parameters with the region of attraction of the disturbed system’s stable equilibrium and thus the transient stability information of the disturbed system can be obtained by comparing the initial configuration with trapping region of the stable equilibrium of the disturbance-canceling system. The application of our approach to single machine infinite bus system shows that this method features a fast computation speed. It can determine the transient stability of the system when a certain perturbation acts on as well as offer the stability margin of the disturbed system, which is of great importance for practical use.

scholarly journals Transient stability enhancement using thyristor controlled series compensator

2019 ◽  
Vol 9 (2) ◽  
pp. 884 ◽  
Author(s):  
Surender Reddy Salkuti
Keyword(s):  
Power System ◽  
Transient Stability ◽  
Stability Margin ◽  
Stable Operation ◽  
Step Method ◽  
Network Reduction ◽  
Reduction Techniques ◽  
Linear Differential ◽  
Thyristor Controlled Series Compensator ◽  
Bus System

Stability is an important issue which determines the stable operation of power system. At present, the most practical available method of transient stability analysis is time domain simulation, in which the non-linear differential equations are solved by step by step method or network reduction techniques. In this paper, FACTS devices are used  in the existing system for effective utilization of existing transmission resources. In this paper, the studies have been carried out in order to improve the transient stability of 5 bus system, and Western System Coordinating Council (WSCC) 9 bus system with fixed compensation on various lines, and the optimal location has been investigated for better results. To improve the transient stability margin further, a Thyristor Controlled Series Compensator (TCSC) has been used, and the results shows the effectiveness of the application of TCSC in improving the transient stability of power system.

Automatic Gain Controller for Variable Speed Wind Turbines

2008 ◽  
Vol 9 (1) ◽  
Author(s):  
Mohamed S ElMoursi
Keyword(s):  
Power System ◽  
Transient Stability ◽  
Reactive Power ◽  
Stability Margin ◽  
Voltage Regulation ◽  
Primary Control ◽  
Voltage Reference ◽  
Voltage Profile ◽  
Frequency Model ◽  
Interconnected Power System

This paper presents a novel controller for DFIG based wind parks, designed to achieve more efficient voltage regulation, reactive power compensation and to enhance the transient stability margin of the interconnected power system. The supervisory-secondary voltage control is used to generate the local voltage reference, providing an improved overall voltage profile, while combining an automatic gain controller (AGC) to improve the transient response of the primary control loop. The controller is implemented and tested with a power system comprising of a lumped, fundamental frequency model of a DFIG based wind park, and hydro and diesel generators connected to the electric grid. The performance of the controller was investigated for both steady-state improvements as well as under extreme contingencies to demonstrate its benefits.

Sign in / Sign up

Export Citation Format

Share Document