Wideband 5G beamforming printed array clutched by LTE‐A 4 × 4‐multiple‐input–multiple‐output antennas with high isolation

2018 ◽  
Vol 12 (8) ◽  
pp. 1407-1413 ◽  
Author(s):  
Changhyeong Lee ◽  
Muhammad Kamran Khattak ◽  
Sungtek Kahng
Keyword(s):  
Multiple Input Multiple Output ◽  
High Isolation ◽  
Multiple Input ◽  
Input Multiple Output

scholarly journals Dual-Band 2 × 2 MIMO Antenna with Compact Size and High Isolation Based on Half-Mode SIW

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Abubaker Ahmed Elobied ◽  
Xue-Xia Yang ◽  
Ningjie Xie ◽  
Steven Gao
Keyword(s):  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Rectangular Patch ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Proximity Coupling

This paper presents a close-spaced dual-band 2 × 2 multiple-input multiple-output (MIMO) antenna with high isolation based on half-mode substrate integrated waveguide (HMSIW). The dual-band operation of the antenna element is achieved by loading a rectangular patch outside the radiating aperture of an HMSIW cavity. The HMSIW cavity is excited by a coaxial probe, whereas the rectangular patch is energized through proximity coupling by the radiating aperture of HMSIW. The antenna elements can be closely placed using the rotation and orthogonal arrangement for a 2 × 2 array. Small neutralization lines at the center of the MIMO antenna can increase the isolation among its elements by around 10 dB in the lower band and 5 dB in the higher band. A prototype of the MIMO antenna is fabricated and its performance is measured. The measured results show that the resonant frequencies are centered at 4.43 and 5.39 GHz with bandwidths of 110 and 80 MHz and peak gains of 6 and 6.4 dBi, respectively. The minimum isolation in both bands is greater than 35 dB. The envelope correlation coefficient is lower than 0.005 within two operating bands.

scholarly journals A High Isolation MIMO Antenna without Decoupling Structure for LTE 700 MHz

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Yanjie Wu ◽  
Yunliang Long
Keyword(s):  
Impedance Matching ◽  
Multiple Input Multiple Output ◽  
Monopole Antenna ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Antenna Performance ◽  
Measurement Results ◽  
Multiple Input ◽  
Input Multiple Output

This paper presents a long-term evolution (LTE) 700 MHz band multiple-input-multiple-output (MIMO) antenna, and high isolation between the two symmetrical antenna elements is obtained without introducing extra decoupling structure. Each antenna element is a combination antenna of PIFA and a meander monopole antenna. The end of the PIFA and the meander monopole antenna are, respectively, overlapped with the 50 Ω microstrip feed line, the two overlapping areas produce additional capacitance which can be considered decoupling structures to enhance the isolation for the MIMO antenna, as well as the impedance matching of the antenna elements. The MIMO antenna is etched on FR4 PCB board with dimensions of 71 × 40 × 1.6 mm3; the edge-to-edge separation of the two antenna elements is only nearly 0.037 λat 700 MHz. Both simulation and measurement results are used to confirm the MIMO antenna performance; the operating bandwidth is 698–750 MHz withS11≤−6 dB andS21≤−23 dB.

scholarly journals High Isolation Millimeter-Wave Wideband MIMO Antenna for 5G Communication

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Fei Wang ◽  
Zhaoyun Duan ◽  
Xin Wang ◽  
Qing Zhou ◽  
Yubin Gong
Keyword(s):  
Wireless Communications ◽  
Transmission Coefficient ◽  
Millimeter Wave ◽  
Multiple Input Multiple Output ◽  
Mimo Antenna ◽  
High Isolation ◽  
Multiple Input ◽  
Input Multiple Output ◽  
The Stability ◽  
24 Ghz

A millimeter-wave wideband antenna is presented for the 5th generation applications. The operation band ranges from 24 GHz to 39 GHz which covers most of the Ka band. Furthermore, a 9×9 multiple-input-multiple-output (MIMO) antenna is developed. The high isolation is achieved without introducing external decoupling structures. The transmission coefficient is under −20 dB within only 0.4 mm space between antenna elements. The radiation pattern also shows the stability within the wide operation band. Both simulated and measured results show that this proposed MIMO antenna is suitable for the future wireless communications.

scholarly journals SPDT discrete switch design using switchable SIW resonators for millimeter wave MIMO transceiver

2021 ◽  
Vol 24 (3) ◽  
pp. 1542
Author(s):  
Amirul Aizat Zolkefli ◽  
Badrul Hisham Ahmad ◽  
Noor Azwan Shairi ◽  
Adib Othman ◽  
Zahriladha Zakaria ◽  
...  
Keyword(s):  
Radio Frequency ◽  
Millimeter Wave ◽  
Multiple Input Multiple Output ◽  
Substrate Integrated Waveguide ◽  
Rf Power ◽  
High Isolation ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Switch Design ◽  
Power Leakage

A single pole double throw (SPDT) discrete switch design using switchable substrate integrated waveguide (SIW) resonators is proposed in this paper. It was designed for the millimeter wave multiple input multiple output (MIMO) transceiver. An example application is for 5G communication in 26 GHz band. High isolation between transmitter and receiver (in the transceiver) is needed in SPDT switch design to minimize any high radio frequency (RF) power leakage in the receiver. Therefore, the use of switchable SIW resonators can achieve higher isolation if compared to the conventional series SPDT switch, where the isolation of the proposed SPDT is depend on the bandstop response of the SIW resonators. The switchable SIW resonators can be switched between allpass and bandstop responses to allow the operation between transmit and receive modes. As a result, the simulation and measurement showed that the proposed SPDT switch produced an isolation higher than 25 dB from 24.25 to 27.5 GHz compared to the conventional design.

Sign in / Sign up

Export Citation Format

Share Document