Coplanar waveguide-fed slot antenna for wireless local area network/worldwide interoperability for microwave access applications

2012 ◽  
Vol 6 (14) ◽  
pp. 1529-1535 ◽  
Author(s):  
C.Y.D. Sim ◽  
K.C. Chiu ◽  
H.D. Chen ◽  
C.H. Chao
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Slot Antenna ◽  
Area Network

A Compact Antenna Design With High Gain for Wireless Energy Harvesting

2021 ◽  
pp. 244-253
Author(s):  
Priya Sharma ◽  
Ashutosh Kumar Singh
Keyword(s):  
Energy Harvesting ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
High Gain ◽  
Center Frequency ◽  
Area Network ◽  
Rf Energy Harvesting ◽  
Rf Energy

A compact rectangular slotted antenna fed through coplanar waveguide for rectenna system is proposed in the application of radio frequency (RF) energy harvesting at center frequency of 2.45 GHz in the wireless local area network (WLAN) band. Three unequal widths of rectangular slots with equal distance have been created step by step to maximize the peak gain to 3.6 dB of the antenna. Radiation plot of the proposed antenna has been depicted to be omnidirectional for RF energy harvesting with maximum radiation efficiency characteristics. The dimension of the antenna is reduced up to 28 × 17 mm2 with better reflection coefficient of -34.6dB.

Design and analysis of a metamaterial inspired dual band antenna for WLAN application

2019 ◽  
Vol 11 (4) ◽  
pp. 351-358 ◽  
Author(s):  
Priyanka Garg ◽  
Priyanka Jain
Keyword(s):  
Reflection Coefficient ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Dual Band ◽  
Band Spectrum ◽  
Area Network ◽  
Dual Band Antenna ◽  
Compact Size

AbstractIn this paper, a compact, low-profile, coplanar waveguide-fed metamaterial inspired dual-band microstrip antenna is presented for Wireless Local Area Network (WLAN) application. To achieve the goal a triangular split ring resonator is used along with an open-ended stub. The proposed antenna has a compact size of 20 × 24 mm2 fabricated on an FR-4 epoxy substrate with dielectric constant (εr) 4.4. The antenna provides two distinct bands I from 2.40 to 2.48 GHz and II from 4.7 to 6.04 GHz with reflection coefficient better than −10 dB, covering the entire WLAN (2.4/5.2/5.8 GHz) band spectrum. The performance of the proposed metamaterial inspired antenna is also studied in terms of the radiation pattern, efficiency, and the realized gain. A comparative study is also presented to show the performance of the proposed metamaterial inspired antenna with respect to other conventional antenna structures in terms of overall size, bandwidth, gain, and reflection coefficient. Finally, the antenna is fabricated and tested. The simulated results show good agreement with the measured results.

Compact slot antenna for wireless local area network 2.4/5.2/5.8 GHz applications

2015 ◽  
Vol 9 (6) ◽  
pp. 495-501 ◽  
Author(s):  
Chow‐Yen‐Desmond Sim ◽  
Yuan‐Kai Shih ◽  
Ming‐Hsuan Chang
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Slot Antenna ◽  
Area Network

scholarly journals A CPW-Fed Rectangular Ring Monopole Antenna for WLAN Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Sangjin Jo ◽  
Hyunjin Choi ◽  
Beomsoo Shin ◽  
Sangyeol Oh ◽  
Jaehoon Lee
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Local Area ◽  
Monopole Antenna ◽  
Dual Band ◽  
Area Network ◽  
Feed Line ◽  
Compact Size

We present a simple coplanar waveguide- (CPW-) fed rectangular ring monopole antenna designed for dual-band wireless local area network (WLAN) applications. The antenna is based on a simple structure composed of a CPW feed line and a rectangular ring. Dual-band WLAN operation can be achieved by controlling the distance between the rectangular ring and the ground plane of the CPW feed line, as well as the horizontal vertical lengths of the rectangular ring. Simulated and measured data show that the antenna has a compact size of21.4×59.4 mm2, an impedance bandwidths of 2.21–2.70 GHz and 5.04–6.03 GHz, and a reflection coefficient of less than −10 dB. The antenna also exhibits an almost omnidirectional radiation pattern. This simple compact antenna with favorable frequency characteristics therefore is attractive for applications in dual-band WLAN.

An UWB dual polarized microstrip fed L-shape slot antenna

2015 ◽  
Vol 8 (2) ◽  
pp. 363-368 ◽  
Author(s):  
Raghupatruni Venkatsiva Ram Krishna ◽  
Raj Kumar ◽  
Nagendra Kushwaha
Keyword(s):  
Electric Fields ◽  
High Performance ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Dual Polarized

In this paper, a microstrip fed, L-shape slot antenna for dual polarization is proposed. The two arms of the slot generate electric fields of orthogonal polarizations. By properly sectioning the slot and the feed line, ultra wideband (UWB) behavior is obtained. The measured impedance bandwidth (S11< −10 dB) is more than 8.6 GHz (112%) and 8.2 GHz (104%) for Port 1 and Port 2, respectively. The measured isolation is better than 25 dB over most of the band. The aperture field distribution justifies the dual polarized nature. A modified version which implements a band-notch over 5.1–5.85 GHz wireless local area network (WLAN) band is also presented. With a compact, single substrate design, the antenna can be useful in MIMO transmission systems, polarimetric UWB radar, high performance microwave imaging, and other future wireless communications devices.

Design of a Quad-Band Monopole Antenna with Independent Frequency Control

2019 ◽  
Vol 28 (06) ◽  
pp. 1950101
Author(s):  
Wang Ren ◽  
Peng-Hong Wang
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Frequency Control ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Local Area ◽  
Monopole Antenna ◽  
Ring Resonators ◽  
Area Network ◽  
Global Positioning

A coplanar waveguide (CPW)-fed I-shaped monopole antenna with independent frequency control characteristic is presented for simultaneously satisfying the global positioning system (GPS), wireless local area network (WLAN), and worldwide interoperability for microwave access (WiMAX) applications. It is printed on an FR4 substrate with a single-layered metallic structure and the overall dimensions are [Formula: see text][Formula: see text]mm3. The proposed antenna consists of an I-shaped monopole, a pair of split-ring resonators (SRRs), and a coplanar ground plane. The unique advantage of this study is that the four frequency bands are generated individually by different radiating elements. That is, each of them can be controlled independently with little interference from others, which brings added convenience to the antenna design, optimization and debugging processes. Simulated and measured results both demonstrate that it can cover the 1.575[Formula: see text]GHz GPS (1.57–1.59[Formula: see text]GHz); 2.4/5.2/5.8[Formula: see text]GHz WLAN (2.4–2.485, 5.15–5.35 and 5.725–5.825[Formula: see text]GHz) and 3.5/5.5[Formula: see text]GHz WiMAX (3.40–3.60 and 5.25–5.85[Formula: see text]GHz) applications with satisfactory radiation patterns and acceptable gains.

Compact multi-band printed antenna with multi-triangular ground plane for WLAN/WiMAX/RFID applications

2014 ◽  
Vol 8 (2) ◽  
pp. 277-281 ◽  
Author(s):  
Tang Yang ◽  
Gao Wen ◽  
Gao Jinsong ◽  
Feng Xiaoguo
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Local Area ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Printed Antenna ◽  
Rfid Applications ◽  
Multi Band

In this paper a novel compact multi-band printed coplanar waveguide (CPW)-feed antenna for wireless local area network (WLAN)/WiMAX/RFID applications is proposed. The proposed antenna is composed of a multi-triangular structure as metal ground plane and the radiation element with four different branches, both of the structures are printed on the same side of a substrate and the antenna is fed by a CPW. By carefully tuning the locations and the sizes of these four branches, the antenna can yield three different resonating frequencies to cover the desired bands for WLAN/WiMAX/RFID applications. The simulated and measured results demonstrate that the proposed antenna has the impedance bandwidth (for return loss less than −10 dB) of 700 MHz (2.2−2.9 GHz), 540 MHz (3.16–3.7 GHz), and 850 MHz (5.05–5.9 GHz), respectively, which can cover the WLAN 2.4/5.8 GHz bands, the WiMAX 2.5/3.5 GHz bands, and the RFID 2.45/5.8 GHz bands.

Sign in / Sign up

Export Citation Format

Share Document