Compact ultra-wideband planar serrated antenna with notch band ON/OFF control

2006 ◽  
Vol 42 (23) ◽  
pp. 1323 ◽  
Author(s):  
V.A. Shameena ◽  
M.N. Suma ◽  
K.Raj Rohith ◽  
P.C. Bybi ◽  
P. Mohanan
Keyword(s):  
Ultra Wideband ◽  
Notch Band

scholarly journals A Circular Disc Microstrip Antenna with Dual Notch Band for GSM/Bluetooth and Extended UWB Applications

2018 ◽  
Vol 7 (2.16) ◽  
pp. 11
Author(s):  
Sanjeev Kumar ◽  
Ravi Kumar ◽  
Rajesh Kumar Vishwakarma
Keyword(s):  
Radiation Pattern ◽  
Microstrip Antenna ◽  
Ground Plane ◽  
Circular Disc ◽  
Ultra Wideband ◽  
Resonant Circuit ◽  
Frequency Range ◽  
Notch Band ◽  
Uwb Applications ◽  
Ku Band

A microstrip antenna with a circular disc design and modified ground is proposed in this paper. Circular shapes of different size have been slotted out from the radiating patch for achieving extended ultra wideband (UWB) with GSM/Bluetooth bands with maximum bandwidth of 17.7 GHz (0.88-18.6 GHz). Further, characteristic of dual notch band is achieved, when a combination of T and L-shaped slots are etched into the circular disc and ground plane respectively. Change in length of slots is controlling the notch band characteristics. The proposed antenna has rejection bandwidth of 1.3-2.2 GHz (LTE band), 3.2-3.9 GHz (WiMAX band) and 5.2-6.1 GHz (WLAN band) respectively. It covers the frequency range of 0.88-18.5 GHz with the VSWR of less than 2. Also, an equivalent parallel resonant circuit has been demonstrated for band notched frequencies of the designed antenna. The gain achieved by the proposed antenna is 6.27 dBi. This antenna has been designed, investigated and fabricated for GSM, Bluetooth, UWB, X and Ku band applications. The stable gain including H & E-plane radiation pattern with good directivity and omnidirectional behavior is achieved by the proposed antenna. Measured bandwidths are 0.5 GHz, 0.8 GHz, 1.1 GHz and 11.7 GHz respectively. 

scholarly journals A Rectangular Notch-Band UWB Antenna with Controllable Notched Bandwidth and Centre Frequency

Sensors ◽  
2020 ◽  
Vol 20 (3) ◽  
pp. 777 ◽  
Author(s):  
Anees Abbas ◽  
Niamat Hussain ◽  
Min-Joo Jeong ◽  
Jiwoong Park ◽  
Kook Sun Shin ◽  
...  
Keyword(s):  
Satellite Communication ◽  
Ultra Wideband ◽  
Center Frequency ◽  
Area Network ◽  
Electromagnetic Bandgap ◽  
Uwb Antenna ◽  
Compact Antenna ◽  
Notch Band ◽  
The Individual ◽  
Rectangular Notch

This paper presents the design and realization of a compact ultra-wideband (UWB) antenna with a rectangular notch wireless area network (WLAN) band that has controllable notched bandwidth and center frequency. The UWB characteristics of the antenna are achieved by truncating the lower ends of the rectangular microstrip patch, and the notch characteristics are obtained by using electromagnetic bandgap (EBG) structures. EBGs consist of two rectangular metallic conductors loaded on the back of the radiator, which is connected to the patch by shorting pins. A rectangular notch at the WLAN band with high selectivity is realized by tuning the individual resonant frequencies of the EBGs and merging them. Furthermore, the results show that the bandwidth and frequency of the rectangular notch band could be controlled according to the on-demand rejection band applications. In the demonstration, the rectangular notch band was shifted to X-band satellite communication by tuning the EBG parameters. The simulated and measured results show that the proposed antenna has an operational bandwidth from 3.1–12.5 GHz for |S11| < -10 with a rectangular notch band from 5–6 GHz, thus rejecting WLAN band signals. The antenna also has additional advantages: the overall size of the compact antenna is 16 × 25 × 1.52 mm3 and it has stable gain and radiation patterns.

A compact ultra-wideband bandpass filter with WLAN notch band

2008 ◽  
Vol 51 (2) ◽  
pp. 503-507 ◽  
Author(s):  
Pai-Yi Hsiao ◽  
Ro-Min Weng
Keyword(s):  
Bandpass Filter ◽  
Ultra Wideband ◽  
Notch Band

Compact UWB monopole antenna with reconfigurable band-notch characteristics

2019 ◽  
Vol 12 (3) ◽  
pp. 252-258 ◽  
Author(s):  
Liping Han ◽  
Jing Chen ◽  
Wenmei Zhang
Keyword(s):  
Ground Plane ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Dual Band ◽  
Radiation Patterns ◽  
Pin Diodes ◽  
Notch Band ◽  
Rectangular Patch ◽  
Compact Size ◽  
Defected Ground Plane

AbstractA compact ultra-wideband (UWB) monopole antenna with reconfigurable band-notch characteristics is demonstrated in this paper. It is comprised of a modified rectangular patch and a defected ground plane. The band-notch property in the WiMAX and WLAN bands is achieved by etching an open-ended slot on the radiating patch and an inverted U-shaped slot on the ground plane, respectively. To obtain the reconfigurable band-notch performance, two PIN diodes are inserted in the slots, and then the notch-band can be switched by changing the states of the PIN diodes. The antenna has a compact size of 0.47 λ1 × 0.27 λ1. The simulated and measured results indicate that the antenna can operate at a UWB mode, two single band-notch modes, and a dual band-notch mode. Moreover, stable radiation patterns are obtained.

scholarly journals Compact Ultra-Wideband Bandpass Filters Achieved by Using a Stub-Loaded Stepped Impedance Resonator

Electronics ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 209 ◽  
Author(s):  
Min-Hang Weng ◽  
Fu-Zhong Zheng ◽  
Hong-Zheng Lai ◽  
Shih-Kun Liu
Keyword(s):  
Resonant Mode ◽  
Bandpass Filters ◽  
Ultra Wideband ◽  
Design Parameters ◽  
Transmission Zeros ◽  
Notch Band ◽  
Resonant Modes ◽  
Attenuation Level ◽  
Stepped Impedance Resonator ◽  
5 Ghz

In this paper, we develop a bandpass filter using a stub-loaded stepped impedance resonator (SLSIR) and calculate the even and odd resonant modes of this type of resonator using the input impedance/admittance analysis. In this study, two impedance ratios and two length ratios are operated as the design parameters for controlling the resonant modes of the SLSIR. Several resonant mode variation curves operating three resonant modes with different impedance ratios and two length ratios are developed. By tuning the desired impedance ratios and length ratios of the SLSIRs, compact ultra-wideband (UWB) bandpass filters (BPFs) can be achieved. Two examples of the UWB BPFs are designed in this study. The first example is UWB filter with a wide stopband and the second one is dual UWB BPF, namely, with UWB performance and a notch band. The first filter is designed for a UWB response from 3.1 to 5.26 GHz having a stopband from 5.3 to 11 GHz, with an attenuation level better than 18 dB. The second filter example is a dual UWB BPF with the frequency range from 3.1 to 5 GHz and 6 to 10.1 GHz using two sets of the proposed SLSIR. The measured results have insertion loss of less than 1 dB, and return loss greater than 10 dB. Furthermore, the coupling structures and open stub of the SLSIR also provide several transmission zeros at the skirt of the passbands for improving the passband selectivity.

Novel wideband slot antenna having notch-band function for 2.4 GHz WLAN and UWB applications

2011 ◽  
Vol 3 (4) ◽  
pp. 451-458 ◽  
Author(s):  
Arumugam Chellamuthu Shagar ◽  
Shaik Davood Wahidabanu
Keyword(s):  
Frequency Band ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Area Network ◽  
Rectangular Slot ◽  
Notch Band ◽  
Uwb Applications

In this paper, the design, simulation, and fabrication of a novel printed rectangular slot antenna with a band-notched function suitable for 2.4 GHz wireless local area network (WLAN) and ultra-wideband (UWB) applications is presented and investigated. Two pairs of slits are introduced into the ground plane to realize band-notched function, by tuning the position, length, and width of which a suitable rejected frequency band can be obtained. To improve the impedance matching, a rectangular cut is also made in the ground plane so that the antenna can cover 2–12 GHz frequency range. According to the measured results, the proposed antenna has a large bandwidth totally satisfying the requirement of 2.4 GHz WLAN and UWB systems, while providing the required band-notch function from 5.1 to 5.9 GHz. The study of transfer function and time-domain characteristics also indicates the band-notched function of the antenna. The radiation patterns display nearly omni-directional performance and the antenna gain is stable except in the rejected frequency band (5.1–5.9 GHz). Moreover, group delays are within 1.5 ns except for the notch band. These features make it a promising candidate for UWB wireless applications. Details of this antenna are described, and the experimental results of the constructed prototype are given.

Sign in / Sign up

Export Citation Format

Share Document