Erratum: Single element-controlled sinusoidal oscillator employing single current conveyor IC

1992 ◽  
Vol 28 (9) ◽  
pp. 895
Author(s):  
R. Senani ◽  
V.K. Singh
1995 ◽  
Vol 17 (4) ◽  
pp. 233-237
Author(s):  
Muhammad Taher Abuelma'atti

New circuit configurations for realizing bandpass and iowpass current-mode second-order filters are proposed. Each configuration uses a single first-generation current conveyor, a transconductance amplifier, three grounded capacitors, and two resistors at most. The parametersω0andω0/Q0of the bandpass and lowpass realizations are not interdependent and, therefore, single element control of the bandpass and lowpass characteristics is possible. Also, the feasibility of realizing a single element current-controlled sinusoidal oscillator is considered.


2021 ◽  
Vol 25 (2) ◽  
pp. 65-76
Author(s):  
Tajinder Singh Arora ◽  

This research article explores the possible applications of voltage differencing current conveyor (VDCC), as a current mode universal filter and a sinusoidal oscillator. Without the need for an additional active/passive element, a very simple hardware modification makes it a dual-mode quadrature oscillator from the filter configuration. Both the proposed circuit requires only two VDCC and all grounded passive elements, hence a preferable choice for integration. The filter has some desirable features such as availability of all five explicit outputs, independent tunability of filter parameters. Availability of explicit quadrature current outputs, independence in start and frequency of oscillations, makes it a better oscillator design. Apart from prevalent CMOS simulation results, VDCC is also realized and experimentally tested using the off-the-shelf integrated circuit. All the pen and paper analysis such as non-ideal, sensitivity and parasitic analysis supports the design.


2006 ◽  
Vol 93 (7) ◽  
pp. 467-478 ◽  
Author(s):  
C. Fongsamut ◽  
K. Anuntahirunrat ◽  
K. Kumwachara ◽  
W. Surakampontorn

1995 ◽  
Vol 17 (4) ◽  
pp. 203-206 ◽  
Author(s):  
Muhammad Taher Abuelma'atti ◽  
Abdallah Al-Ali Al-Ghumaiz

A novel single-element-controlled oscillator using two negative first-generation current-conveyors, two grounded capacitors and three grounded resistors is presented. The proposed circuit enjoys independent oscillation control through a single grounded resistor and independent frequency control through a single grounded resistor or a single grounded capacitor.


2005 ◽  
Vol 54 (6) ◽  
pp. 2402-2406 ◽  
Author(s):  
A.A. Khan ◽  
S. Bimal ◽  
K.K. Dey ◽  
S.S. Roy

1996 ◽  
Vol 80 (6) ◽  
pp. 747-752 ◽  
Author(s):  
MUHAMMAD TAHER ABUELMA'ATTI ◽  
SA'AD MUHAMMAD AL-SHAHRANI

Author(s):  
Kasim K. Abdalla

Two new 45o phase shifted sinusoidal oscillator configurations employing single Second Generation Fully Differential Current Conveyor (FDCCII), two grounded capacitors and two grounded resistors are presented. The proposed oscillators can provide four sinusoidal voltage outputs with each a 45o phase difference. These circuits can also be utilized as voltage-mode quadrature oscillators. Additional output stages incorporation in FDCCII can also result in current outputs spaced 45 degree apart. The proposed circuits enjoy the simplicity and less passive and active component. The Total Harmonic Distortion (THD) of the output waveforms was reasonability values (less than 4.5%). The circuits can supply two equi-quadrature outputs and the Lissajous patterns confirm the quadrature voltage output waveforms. The workability of the circuits is simulated by PSPICE 0.18 μm CMOS technology. The non-ideal analysis and simulation results verifying theoretical analyses are also investigated.


Sign in / Sign up

Export Citation Format

Share Document