Full-wave analysis of microstrip leaky-wave antenna

1989 ◽  
Vol 25 (13) ◽  
pp. 870 ◽  
Author(s):  
M. Ghomi ◽  
H. Baudrand
2020 ◽  
Vol 10 (10) ◽  
pp. 3474
Author(s):  
Álvaro J. Pascual-Gracia ◽  
Muhsin Ali ◽  
Guillermo Carpintero Del Barrio ◽  
Fabien Ferrero ◽  
Laurent Brochier ◽  
...  

This manuscript reports the first leaky-wave antenna (LWA) array excited by a photomixer as well as its potential application for alignment in wireless links. The designed array is manufactured in printed circuit board (PCB) technology, works at the E-band (from 75 to 85 GHz), and provides a directive beam of about 18 dBi with a frequency scanning span of 22°. The antenna element consists of a microstrip line periodically loaded with stubs, and it has been designed employing a hybrid approach combining full-wave simulations and transmission line theory. This approach enables the optimization of the periods when the open-stopband of the LWA is mitigated or removed at the frequency of broadside emission. The proposed antenna was first tested using a ground signal ground (GSG) probe; the measured return loss and radiation patterns of the fabricated prototype were in good agreement with full-wave simulations. Then, the LWA array was integrated with the photomixer chip using conductive epoxy threads. Measurements of the radiated power yielded a maximum of 120 µW at 80.5 GHz for a 9.8 mA photocurrent. Finally, the antenna was used in a 25 cm wireless link, obtaining a 2.15 Gbps error-free data rate.


2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Jun Gao ◽  
Xue Lei ◽  
Guo-Hu Chen ◽  
Yi Zhang ◽  
Jun-Mo Wu

In order to solve difficulty in designing nonlinear slow-wave structure (SWS) of the variable inclination continuous transverse stub (VICTS) antenna, we combine the study of the semiopen rectangular grating SWS in the PPW with equivalent circuit theory of leaky-wave antenna to propose a theoretical model for SWS of VICTS element. The computations that the propagation characteristics of VICTS element are calculated by the theoretical model. The results are consistent with the full-wave simulation, which prove the validity and accuracy of the theoretical model. Lastly, by using the theoretical model, an approach for nonlinearly designing SWS is introduced and carried out. The approach improves the gain of the VICTS antenna 0.4 dB.


2002 ◽  
Vol 12 (3) ◽  
pp. 272-287 ◽  
Author(s):  
P. Baccarelli ◽  
P. Burghignoli ◽  
C. Di Nallo ◽  
F. Frezza ◽  
A. Galli ◽  
...  

2013 ◽  
Vol 61 (8) ◽  
pp. 3967-3975 ◽  
Author(s):  
Takao Tomofuji ◽  
Hiroshi Terada ◽  
Shogo Kawabata ◽  
Kikuo Wakino ◽  
Toshihide Kitazawa

Author(s):  
M. Lucido ◽  
M.D. Migliore ◽  
G. Panariello ◽  
F. Schettino

Sign in / Sign up

Export Citation Format

Share Document