scholarly journals Artificial magnetic conductor with self‐complementary unit cells having very high angular stability

2020 ◽  
Vol 56 (14) ◽  
pp. 704-706
Author(s):  
S. Sarkar ◽  
B. Gupta
Keyword(s):  
Angular Stability ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Unit Cells ◽  
Very High

scholarly journals Low-Profile Spidron Fractal Dipole Antenna with a Ferrite-Loaded Artificial Magnetic Conductor for Manpack Applications

2020 ◽  
Vol 10 (24) ◽  
pp. 8843
Author(s):  
Oh Heon Kwon ◽  
Keum Cheol Hwang
Keyword(s):  
High Frequency ◽  
Dipole Antenna ◽  
Magnetic Conductor ◽  
Very High Frequency ◽  
Artificial Magnetic Conductor ◽  
Received Power ◽  
Low Profile ◽  
Profile Characteristics ◽  
Very High ◽  
Good Agreement

In this paper, a Spidron fractal dipole antenna with a ferrite-loaded artificial magnetic conductor (AMC) is presented. By applying ferrite composed of nickel–zinc with a high permeability value, a compact AMC that operates in the broadband frequency range within the high-frequency/very-high-frequency/ultra-high-frequency (HF/VHF/UHF) bands was designed. A Spidron fractal-shaped dipole antenna with a quasi-self-complementary structure was designed and combined with a miniaturized ferrite-loaded AMC. This allowed the designed AMC-integrated dipole antenna to operate in a wide frequency band, covering the HF/VHF/UHF bands, with low-profile characteristics. A prototype of the proposed Spidron fractal dipole antenna with the AMC was manufactured and measured and found to meet low VSWR (voltage standing wave radios) specifications of <3.5 within the 20–500 MHz bandwidth range. The simulated and measured results are in good agreement. The size of the Spidron fractal dipole antenna with the AMC is 0.03×0.026×0.001λ3 relative to the wavelength of the lowest operating frequency. The received power of the Spidron fractal dipole antenna with the AMC was also measured when it was applied to relatively small applications, such as a manpack in this case.

scholarly journals A Compact, Low-Profile Log-Periodic Meandered Dipole Array Antenna with an Artificial Magnetic Conductor

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Oh Heon Kwon ◽  
Sungwoo Lee ◽  
Jong Min Lee ◽  
Keum Cheol Hwang
Keyword(s):  
Ground Plane ◽  
Array Antenna ◽  
Main Beam ◽  
Beam Direction ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Line Configuration ◽  
Low Profile ◽  
Unit Cells ◽  
Meander Line

A compact and low-profile log-periodic meandered dipole array (LPMDA) antenna with an artificial magnetic conductor (AMC) is proposed. For compactness, a meander line configuration is implemented with dipole elements and optimized using a genetic algorithm (GA) to realize the LPMDA antenna. As a result, a size reduction of approximately 30% is achieved as compared to a conventional log-periodic dipole array antenna. To enhance the gain characteristics, the AMC ground plane configuration is realized with 9 × 9 unit cells for the LPMDA antenna. Two prototypes of the proposed LPMDA antennas with and without an AMC are fabricated and measured to verify its performance. The measured −10 dB reflection ratio bandwidths are 2.56 : 1 (0.85–2.18 GHz) and 2.34 : 1 (0.92–2.16 GHz) for the proposed LPMDA antennas with and without the AMC, respectively. The gain at the main beam direction within the operating frequency bandwidth is significantly improved from 3.94–7.17 dBi to 7.86–10.01 dBi by applying the AMC.

scholarly journals Novel Flexible Artificial Magnetic Conductor

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
M. E. de Cos ◽  
F. Las-Heras
Keyword(s):  
Reflection Coefficient ◽  
Oblique Incidence ◽  
Stability Margin ◽  
Laser Micromachining ◽  
Anechoic Chamber ◽  
Angular Stability ◽  
Polarization Angle ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor

A novel flexible uniplanar AMC design is presented. An AMC prototype is manufactured using laser micromachining and it is characterized under flat and bent conditions by measuring its reflection coefficient phase in an anechoic chamber. The designed prototype shows broad AMC operation bandwidth (6.96% and higher) and polarization angle independency. Its angular stability margin, when operating under oblique incidence, is also tested obtaining±8°as limit for a 14.4 cm × 14.4 cm prototype.

scholarly journals Broadband metasurfaces loaded with non-Foster elements

2021 ◽  
Vol 2015 (1) ◽  
pp. 012061
Author(s):  
Nikita Kalmykov ◽  
Bair Buiantuev ◽  
Dmitry Kholodnyak
Keyword(s):  
Frequency Band ◽  
Conversion Error ◽  
Magnetic Conductor ◽  
Bandwidth Extension ◽  
Artificial Magnetic Conductor ◽  
Low Profile ◽  
Low Profile Antennas ◽  
Unit Cells ◽  
Operational Frequency ◽  
Impedance Converter

Abstract Metasurfaces have been widely used to design low-profile antennas, thin absorbers, lenses etc. The operational frequency band of a metasurface is rather narrow due to its resonant nature. Loading metasurface unit cells with non-Foster elements allows for remarkable bandwidth extension. In this paper, design of a broadband metasurface to operate as an artificial magnetic conductor is considered. The main issues which influence the bandwidth extension such as implementation of the non-Foster load, minimization of conversion error of a negative impedance converter, and circuit stabilization are addressed.

scholarly journals Low Scattering Microstrip Antenna Based on Broadband Artificial Magnetic Conductor Structure

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 750 ◽  
Author(s):  
Muhammad Saleem ◽  
Xiao-Lai Li
Keyword(s):  
Microstrip Antenna ◽  
Energy Reduction ◽  
Destructive Interference ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Reflection Phase ◽  
Radiation Properties ◽  
Unit Cells ◽  
Zero Degree ◽  
A New Technique

In this summary, we have suggested a new technique in which destructive interference principle is incorporated into a chessboard like a reflective screen, and the proposed antenna realizes a remarkable in-band and also out-of-band backscattered energy reduction by using a metasurface (MS). Two different MS unit cells are designed to provide the resonant frequency with a zero-degree reflection phase. Metasurface unit cells are configured in a chessboard-like reflector screen to achieve the reflection phase difference of 180° ± 37° over a broadband range of frequencies to redirect the scattering field into four quadrants. It is implemented to reduce the backscattered energy level of the microstrip antenna, which is based on destructive interference principle. The simulations indicate that the proposed antenna possesses significant backscattered energy reduction from 6 GHz to 16 GHz in both x– and y– polarization and also −10 dB backscattering reduction at antenna working band (7.4–7.8 GHz) is covered. Moreover, the radiation performance is preserved well and artificial magnetic conductor (AMC) unit cells work at different frequencies which are not influenced on the radiation properties. The bistatic performance of the antenna at different frequencies is also presented. Measurements and simulations of the fabricated design coincide well and the proposed design is verified and validated successfully.

Novel Artificial Magnetic Conductor for 5G Application

2017 ◽  
Vol 5 (3) ◽  
pp. 636 ◽  
Author(s):  
Maizatun Muhamad ◽  
Maisarah Abu ◽  
Zahriladha Zakaria ◽  
Hasnizom Hassan
Keyword(s):  
Band Gap ◽  
Angular Stability ◽  
The Novel ◽  
Magnetic Conductor ◽  
Dispersion Diagram ◽  
Artificial Magnetic Conductor ◽  
Patch Shape ◽  
Reflection Phase ◽  
Specific Frequency

A design of novel bendable Artificial Magnetic Conductor (AMC) structures has been presented in this paper in two selected of frequencies at 5G application. These designs started with a square patch shape and continued with the combination of circular and Jerusalem shape which resonate at a frequency of 18 GHz and 28 GHz. Details of the theory and the structures of AMCs are explained. The reflection phase, bandwidth, angular stability and dispersion diagram were studied. The simulated results plotted that the novel AMC has good bandwidth and size is reduced by 53 percent and 55 percent for both frequencies. Other than that, it is also proved that the novel AMC has a stable reflection phase and no band gap performs at the specific frequency. The good performances of this novel AMC make it useful in order to improve antenna’s performance.

scholarly journals A Dual-Band High-Gain Subwavelength Cavity Antenna with Artificial Magnetic Conductor Metamaterial Microstructures

Micromachines ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 58
Author(s):  
Guang Lu ◽  
Fabao Yan ◽  
Kaiyuan Zhang ◽  
Yunpeng Zhao ◽  
Lei Zhang ◽  
...  
Keyword(s):  
Printed Circuit Board ◽  
High Gain ◽  
Resonant Wavelength ◽  
Circuit Board ◽  
Dual Band ◽  
Dual Frequency ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Low Profile ◽  
Unit Cells

This paper presents dual-band high-gain subwavelength cavity antennas with artificial magnetic conductor (AMC) metamaterial microstructures. We developed an AMC metamaterial plate that can be equivalent to mu-negative metamaterials (MNMs) at two frequencies using periodic microstructure unit cells. A cavity antenna was constructed using the dual-band AMC metamaterial plate as the covering layer and utilizing a feed patch antenna with slot loading as the radiation source. The antenna was fabricated with a printed circuit board (PCB) process and measured in an anechoic chamber. The |S11| of the antenna was −26.8 dB and −23.2 dB at 3.75 GHz and 5.66 GHz, respectively, and the realized gain was 15.2 dBi and 18.8 dBi at two resonant frequencies. The thickness of the cavity, a sub-wavelength thickness cavity, was 15 mm, less than one fifth of the long resonant wavelength and less than one third of the short resonant wavelength. This new antenna has the advantages of low profile, light weight, dual-frequency capability, high gain, and easy processing.

Sign in / Sign up

Export Citation Format

Share Document