Dual‐band bow‐tie slot antenna fed by coplanar waveguide

2014 ◽  
Vol 50 (19) ◽  
pp. 1338-1340 ◽  
Author(s):  
H.W. Liu ◽  
X. Zhan ◽  
S. Li ◽  
J.H. Lei ◽  
F. Qin
Keyword(s):  
Coplanar Waveguide ◽  
Dual Band ◽  
Slot Antenna ◽  
Bow Tie

Dual Band Slot Antenna for 3.5 WiMAX and 5.8 WLAN

2014 ◽  
Vol 68 (1) ◽  
Author(s):  
Sahar Chagharvand ◽  
M. R. B. Hamid ◽  
M. R. Kamarudin ◽  
Mohsen Khalily
Keyword(s):  
Radiation Pattern ◽  
Coplanar Waveguide ◽  
Single Layer ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Antenna Gain ◽  
Dual Bandwidth ◽  
Electromagnetic Performance ◽  
Good Agreement

This paper presents a single layer planar slot antenna for dual band operation. The antenna is fed by a coplanar waveguide (CPW) with two inverted C-shaped resonators to achieve the dual band operation. The impedance bandwidth for ǀS11ǀ < -10dB is 14% in lower band and 7% in higher band. The antenna prototype’s electromagnetic performance, impedance bandwidth, radiation pattern, and antenna gain were measured. The proposed configuration offers a relatively compact, easy to fabricate and dual band performance providing gain between 2 and 4 dBi. The designed antenna has good dual bandwidth covering 3.5 WiMAX and 5.8 WLAN tasks. Experimental and numerical results also showed good agreement after comparison.

Very-Low-Profile Grounded Coplanar Waveguide-Fed Dual-Band WLAN Slot Antenna for On-Body Antenna Application

2020 ◽  
Vol 19 (1) ◽  
pp. 213-217 ◽  
Author(s):  
Kin-Lu Wong ◽  
Hsuan-Jui Chang ◽  
Chung-Ying Wang ◽  
Shao-Yu Wang
Keyword(s):  
Coplanar Waveguide ◽  
Dual Band ◽  
Slot Antenna ◽  
Low Profile

A CPW-fed uniplanar dual-band tri-polarization diversity antenna based on PIN diode for the wireless communication

2017 ◽  
Vol 9 (8) ◽  
pp. 1695-1703
Author(s):  
Haixiong Li ◽  
Yunlong Gong ◽  
Jiakai Zhang ◽  
Jun Ding ◽  
Chenjiang Guo
Keyword(s):  
Wireless Communication ◽  
Circular Polarization ◽  
Coplanar Waveguide ◽  
Axial Ratio ◽  
Dual Band ◽  
Slot Antenna ◽  
Reconfigurable Antenna ◽  
Pin Diode ◽  
Left Handed ◽  
The Right

In this paper, a coplanar waveguide (CPW)-fed dual-band uniplanar tri-polarization reconfigurable antenna based on the PIN diode switch is proposed. The proposed antenna can be reconfigured between the linear polarization (LP) and the circular polarization (CP) mode, including both the right-handed circular polarization and left-handed circular polarization simultaneously within the dual operating bands. The central frequencies of the bands are 2.63 and 4.42 GHz, respectively, and the overlapped operating bandwidth is 17.8 and 3.40%. The proposed reconfigurable antenna is a closed-slot antenna fed by the CPW transmission line and the reconfigurable mechanism is to regulate the T-shaped driven stub through switching the PIN diodes on and off. The scattering parameters, axial ratio, radiation pattern, gain, and the radiation efficiency of the proposed antenna are all investigated in the following. The optimized antenna has been fabricated to experimental test, the simulated and the measured results agree well with each other. The lower frequency band of the proposed antenna covers the 2.40 GHz WLAN specification and the upper band can be used for the 5 G communication (4.40–4.50 GHz); therefore it is suitable to be applied in the mobile wireless communication.

Design a 3.5 slot antenna using coplanar waveguide (CPW) for dual band application

2013 ◽  
Author(s):  
M. Z. A. Abd Aziz ◽  
M. M. Shukor ◽  
M. K. Suaidi ◽  
B. H. Ahmad ◽  
M. A. Othman ◽  
...  
Keyword(s):  
Coplanar Waveguide ◽  
Dual Band ◽  
Slot Antenna

CPW-Fed Circularly Polarized Slot Antenna

2017 ◽  
Vol 7 (10) ◽  
pp. 70
Author(s):  
Ajit Chandramohan Yadav ◽  
Shafiyoddin Badroddin Sayyad
Keyword(s):  
Frequency Band ◽  
Microstrip Antenna ◽  
Dielectric Material ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Dual Band ◽  
Slot Antenna ◽  
Frequency Range ◽  
Band Frequency ◽  
Circularly Polarized

This article demonstrates the coplanar waveguide (CPW) feed L- slot microstrip antenna for multi frequency band operation is presented. The proposed antenna is excited by a single CPW feed connected to a Microstrip antenna. In this radiating patch and feed are etched on the same dielectric material. A SMA connector is used to connect the feed strip which couples the energy to a radiating patch by capacitive feed. The length and width are designed to obtained dual band frequency range. A truncation is used for multiband operations and for proper impedance matching. L- slot is used to increase the depth of S11 parameter. 

scholarly journals A Novel Dual-Band Circularly Polarized Rectangular Slot Antenna

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Biao Li ◽  
Yang Ding ◽  
Ying-Zeng Yin
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Surface Current ◽  
Axial Ratio ◽  
Dual Band ◽  
Slot Antenna ◽  
Surface Current Density ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Metal Frame

A coplanar waveguide fed dual-band circularly polarized rectangular slot antenna is presented. The proposed antenna consists of a rectangular metal frame acting as a ground and an S-shaped monopole as a radiator. The spatial distribution of the surface current density is employed to demonstrate that the circular polarization is generated by the S-shaped monopole which controls the path of the surface currents. An antenna prototype, having overall dimension 37 × 37 × 1 mm3, has been fabricated on FR4 substrate with dielectric constant 4.4. The proposed antenna achieves 10 dB return loss bandwidths and 3 dB axial ratio (AR) in the frequency bands 2.39–2.81 GHz and 5.42–5.92 GHz, respectively. Both these characteristics are suitable for WLAN and WiMAX applications.

Sign in / Sign up

Export Citation Format

Share Document