Negative resistance effect induced by network dynamics in power-electronic-based power systems: a simple case study

Author(s):  
Qingfeng Yue ◽  
Jiawei Yu ◽  
Meng Zhan
Electronics ◽  
2021 ◽  
Vol 10 (19) ◽  
pp. 2344
Author(s):  
Martin Kjær ◽  
Huai Wang ◽  
Frede Blaabjerg

The reliability of power converters has been extensively examined in terms of component- and converter level. However, in case of multiple generation units, the evaluation of the performance of power systems requires system-level modeling. This paper aims to merge the prior art of reliability modeling of power converters with the adequacy evaluation of power systems through an extensive design and evaluation analysis of a microgrid based case study. The methodology proposed in the paper integrates the device-level analysis into the domain of the conventional power system reliability analysis while outlining the steps needed to deal with non-exponential distributed failures of power electronic-based generation units. A replacement policy of the power electronic-based units is adopted by means of evaluating the system risk of not supplying system loads, and, finally, an approach on how to ensure a desired replacement frequency is outlined.


Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3274
Author(s):  
Jose Rueda Torres ◽  
Zameer Ahmad ◽  
Nidarshan Veera Kumar ◽  
Elyas Rakhshani ◽  
Ebrahim Adabi ◽  
...  

Future electrical power systems will be dominated by power electronic converters, which are deployed for the integration of renewable power plants, responsive demand, and different types of storage systems. The stability of such systems will strongly depend on the control strategies attached to the converters. In this context, laboratory-scale setups are becoming the key tools for prototyping and evaluating the performance and robustness of different converter technologies and control strategies. The performance evaluation of control strategies for dynamic frequency support using fast active power regulation (FAPR) requires the urgent development of a suitable power hardware-in-the-loop (PHIL) setup. In this paper, the most prominent emerging types of FAPR are selected and studied: droop-based FAPR, droop derivative-based FAPR, and virtual synchronous power (VSP)-based FAPR. A novel setup for PHIL-based performance evaluation of these strategies is proposed. The setup combines the advanced modeling and simulation functions of a real-time digital simulation platform (RTDS), an external programmable unit to implement the studied FAPR control strategies as digital controllers, and actual hardware. The hardware setup consists of a grid emulator to recreate the dynamic response as seen from the interface bus of the grid side converter of a power electronic-interfaced device (e.g., type-IV wind turbines), and a mockup voltage source converter (VSC, i.e., a device under test (DUT)). The DUT is virtually interfaced to one high-voltage bus of the electromagnetic transient (EMT) representation of a variant of the IEEE 9 bus test system, which has been modified to consider an operating condition with 52% of the total supply provided by wind power generation. The selected and programmed FAPR strategies are applied to the DUT, with the ultimate goal of ascertaining its feasibility and effectiveness with respect to the pure software-based EMT representation performed in real time. Particularly, the time-varying response of the active power injection by each FAPR control strategy and the impact on the instantaneous frequency excursions occurring in the frequency containment periods are analyzed. The performed tests show the degree of improvements on both the rate-of-change-of-frequency (RoCoF) and the maximum frequency excursion (e.g., nadir).


Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1717
Author(s):  
Camilo Andrés Ordóñez ◽  
Antonio Gómez-Expósito ◽  
José María Maza-Ortega

This paper reviews the basics of series compensation in transmission systems through a literature survey. The benefits that this technology brings to enhance the steady state and dynamic operation of power systems are analyzed. The review outlines the evolution of the series compensation technologies, from mechanically operated switches to line- and self-commutated power electronic devices, covering control issues, different applications, practical realizations, and case studies. Finally, the paper closes with the major challenges that this technology will face in the near future to achieve a fully decarbonized power system.


Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4082
Author(s):  
Luis Arribas ◽  
Natalia Bitenc ◽  
Andreo Benech

During the last decades, there has been great interest in the research community with respect to PV-Wind systems but figures show that, in practice, only PV-Diesel Power Systems (PVDPS) are being implemented. There are some barriers for the inclusion of wind generation in hybrid microgrids and some of them are economic barriers while others are technical barriers. This paper is focused on some of the identified technical barriers and presents a methodology to facilitate the inclusion of wind generation system in the design process in an affordable manner. An example of the application of this methodology and its results is shown through a case study. The case study is an existing PVDPS where there is an interest to incorporate wind generation in order to cope with a foreseen increase in the demand.


Author(s):  
Nnaemeka Sunday Ugwuanyi ◽  
Uma Uzubi Uma ◽  
Arthur Obiora Ekwue
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document