Coal ash fusion temperature model based on SVM optimized by ACO

Author(s):  
Pu Han ◽  
Yong-die Zhai ◽  
Yuan Lu ◽  
Fang Gao
1987 ◽  
Vol 109 (3) ◽  
pp. 124-128 ◽  
Author(s):  
R. R. Rhinehart ◽  
A. A. Attar

This paper describes a thermodynamically based correlation between coal ash fusion temperatures and ash composition. A wide range of data from the literature was used to obtain the values of model parameters. A seven-parameter correlation is proposed which permits predicting the ash fusion temperature with a standard error ± 65°C or better.


2013 ◽  
Vol 295-298 ◽  
pp. 3094-3097 ◽  
Author(s):  
Han Xu Li ◽  
Zi Li Zhang ◽  
Yong Xin Tang

High-efficiency flux was developed to lower the ash fusion temperature of coal LQ and reduce the addition content in coal gasification process. The effect of high-efficiency flux on the coal ash melting temperature and mineral transformation were studied by ash fusion temperature detector and XRD (X-ray diffractometer) respectively in reducing atmosphere. Compared with limestone flux, the high-efficiency flux can decrease the coal ash melting temperature effectively with half addition content. The ash flow temperature (FT) of coal LQ can be lowered to less than 1350°C with the addition of 3% high-efficiency flux ,while limestone flux need to add more than 8% to reach to this temperature. With the high-efficiency flux added, cordierite, anorthite and Mg-Fe-Al oxide were formed at high temperature, which is the main reason to sharply decrease the ash fusion temperature.


2013 ◽  
Vol 448-453 ◽  
pp. 3009-3012
Author(s):  
Na Gao ◽  
Sheng Hua Liu ◽  
Yan Hong Guo

The coal of Zichang was selected as the sample coal, the physical properties of the ash is analyzed with ICP-AES. The ash fusion temperature was researched by adding different basic oxide contents. The results show that the general trend is decrease firstly, and then increase when adding basic oxides. Blended ash fusion temperatures do not change linearly with blending ratios and ash fusion will decrease when adding the contents of CaO, Na2O and MgO, but the effect is different. Na2O is best and CaO is second. Mineral composition and type at addition oxides were determined by XRD analysis. Some combinations of component coals mineral produce eutectic minerals at high temperature;It can explain the reason of oxides decrease the ash fusion. Vitreous minerals are formed to explain increase the fusion temperature.


2016 ◽  
Vol 40 ◽  
pp. 05010 ◽  
Author(s):  
Suzhen Miao ◽  
Qingyin Jiang ◽  
Hua Zhou ◽  
Jia Shi ◽  
Zhikai Cao

1975 ◽  
Vol 97 (3) ◽  
pp. 395-403 ◽  
Author(s):  
E. C. Winegartner ◽  
B. T. Rhodes

Regression analysis is used to develop equations for calculating fusion temperatures of coal ash from chemical composition, based on 1250 analyses of ash from both eastern and western coal. Standard errors for the equations are generally less than 50°F (27°C), which is the analytical tolerance of the ash fusion temperature measurements. Equations are given for eastern, western, and combined eastern and western coals. These equations: (1) provide a technique for calculating ash fusion temperatures from the chemical composition of the ash; (2) provide a method for calculating the ash fusion properties of coal blends; and (3) provide an improved understanding of the effect, significance, and interactions of ash elements with respect to the thermal properties of coal ash.


Sign in / Sign up

Export Citation Format

Share Document