Subcellular Distribution of Low- and High Molecular-Weight Renin and its Relation to a Renin Inhibitor in Pig Renal Cortex

1980 ◽  
Vol 59 (5) ◽  
pp. 337-345 ◽  
Author(s):  
G. A. Sagnella ◽  
P. R. B. Caldwell ◽  
W. S. Peart
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Subcellular Distribution ◽  
Renal Cortex ◽  
Soluble Fraction ◽  
Gel Filtration ◽  
Apparent Molecular Weight ◽  
Main Peak ◽  
Low Molecular Weight ◽  
Molecular Weight Form

1. The subcellular distribution of low-molecular-weight and high-molecular weight forms of pig renin has been investigated. 2. Renin, in aqueous extracts of a ‘renin granular fraction’ prepared by differential centrifugation, after gel filtration on Sephadex G-100 displayed an apparent molecular weight of 40 000 and was not activated by acidification to pH 2.8. 3. Renin in the soluble fraction separated on Sephadex G-100 at neutral pH displayed a main peak of activity with an apparent molecular weight of 40000. When eluates were acidified to pH 2.8 (2°C, 60 min) a marked increase in renin activity was observed in the region corresponding to an apparent molecular weight of 50 000. 4. A renin inhibitory material was isolated from the soluble fraction by DEAE chromatography. This material displayed an apparent molecular weight of 50000 and it was destroyed by acidification to pH 2.8. 5. The presence of the proteolytic inhibitor N-ethylmaleimide yielded an apparently high-molecular-weight form of renin (60000–70000) from the soluble fraction, but this was not found in the granular fraction. 6. We conclude that pig renal renin is stored within membrane-bounded subcellular organelles as the low-molecular-weight form. High-molecular-weight renin and renin inhibitory activity are localized to the cortical soluble fraction. In addition, the soluble fraction contains a material which in the presence of N-ethylmaleimide results in the formation of an apparently high-molecular-weight renin.

Sulphydryl Oxidation in the Mechanism of Molecular-Weight Conversion of Renin in Dog Kidney

1982 ◽  
Vol 62 (2) ◽  
pp. 157-162 ◽  
Author(s):  
Fumihiko Ikemoto ◽  
Kazuo Takaori ◽  
Hiroshi Iwao ◽  
Kenjiro Yamamoto
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Renal Cortex ◽  
Soluble Fraction ◽  
Low Molecular Weight ◽  
Oxidizing Agent ◽  
Nitrobenzoic Acid ◽  
Binding Substance ◽  
Sh Group ◽  
Dog Kidney

1. A high-molecular-weight renin (Mr 60 000) was formed by the reaction of a low-molecular-weight renin (Mr 40 000) with a renin-binding substance in canine renal cortical extract in the presence of the sulphydryl (SH) group oxidizing agent potassium tetrathionate; thus the reaction required SH oxidation. 2. Renin extracted from isolated renin granules was adsorbed on to thiopropyl Sepharose 6B, and then liberated with dithiothreitol (50 mmol/l), indicating that it possessed on SH moiety(s). 3. However, the renin was capable of reaction with the renin-binding substance even after its SH moiety (or moieties) was protected with 5,5′-dithiobis-(2-nitrobenzoic acid). 4. The high-molecular-weight renin was converted into the low-molecular-weight renin by incubation (37°C, 15 min) with cytosol (soluble fraction) of renal cortex and liver. Such converting ability was diminished after the cytosol was treated with perchloric acid or potassium tetrathionate. 5. These results suggest that the reaction of renin with the renin-binding substance does not require disulphide bond(s) and that an enzymelike substance which is sensitive to SH oxidation is involved in the conversion from the high-molecular-weight renin into the low-molecular weight renin.

scholarly journals Studies on the appearance of a hepatic copper-binding protein in normal and zinc-deficient rats

1976 ◽  
Vol 36 (1) ◽  
pp. 101-112 ◽  
Author(s):  
I. Bremner ◽  
N. T. Davies
Keyword(s):  
Molecular Weight ◽  
Metal Binding ◽  
Binding Protein ◽  
Gel Filtration ◽  
Apparent Molecular Weight ◽  
Low Molecular Weight ◽  
Copper Binding ◽  
Hepatic Copper ◽  
Copper Binding Protein ◽  
Molecular Weight Form

1. A study has been made by gel-filtration techniques of the soluble copper- and zinc-binding proteins in rat liver after both intraperitoneal injection of Cu and dietary Cu supplementation.2. Liver Cu and Zn concentrations increased after injection of Cu, both metals accumulating in the cytosol, mainly in a fraction with an apparent molecular weight of (about 12 000)3. When Zn-deficient rats were injected with Cu, there was little change in liver Zn concentration and the occurrence of Cu in the low-molecular-weight form (about 12 000) was more transient. At most periods after injection, Cu accumulated mainly in a fraction with a molecular weight greater than 65 000.4. When the rats were Cu-loaded by dietary supplementation, virtually no Cu or Zn was found in the low-molecular-weight form in Zn-deficient rats, although they were found in the Zn-supplemented animals.5. The results suggest that Zn is essential for the accumulation of Cu in this form, but not for Cu to stimulate production of the metal-binding protein by a process requiring active protein synthesis.

Purification of High Molecular Weight Urokinase from Human Urine and Comparative Study of Two Active Forms of Urokinase

1983 ◽  
Vol 49 (02) ◽  
pp. 091-095 ◽  
Author(s):  
Takeji Shibatani ◽  
Toshio Kakimoto ◽  
Ichiro Chibata
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Human Urine ◽  
Gel Filtration ◽  
Low Molecular Weight ◽  
Improved Method ◽  
Assay Methods ◽  
Hydroxyl Apatite ◽  
Cellulose Column ◽  
Molecular Weight Form

SummaryAn improved method for the purification of high molecular weight urokinase to homogeneity from human urine was established. A yield of 32% with a 3,100-fold purification was obtained by Hyflo Super-Cel treatment, heat treatment at 60° C for 10 hr, serial column chromatography on DEAE-Sepharose CL-6B and 0-[3-(p-sulfophenylamino)-2-hydroxypropyl]-cellulose (SFOP-cellulose), and gel filtration on Ultrogel AcA 54. The low molecular weight form of urokinase was also purified to homogeneity by chromatography on hydroxyl apatite and gel filtration on Sephadex G-75 after the SFOP-cellulose column step. The high molecular weight urokinase had only one isoelectric form with a pi of 9.7, whereas the low molecular weight form had six isoelectric subforms with pi values between 9.4 and 6.4. The absorption coefficients at 280 nm of both urokinase forms were 13.61 and 13.50, respectively. Fibrinolytic and esterolytic activities of the two urokinase forms were compared in various assay methods.

Interconversion between High- and Low-Molecular-Weight Forms of Renin in Dog Kidney

1980 ◽  
Vol 59 (s6) ◽  
pp. 25s-27s ◽  
Author(s):  
K. Yamamoto ◽  
F. Ikemoto ◽  
M. Kawamura ◽  
K. Takaori
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Apparent Molecular Weight ◽  
Kidney Cortex ◽  
Low Molecular Weight ◽  
Cytosol Fraction ◽  
High Molecular Weight Form ◽  
Binding Substance ◽  
Dog Kidney ◽  
Molecular Weight Form

1. The low-molecular-weight (40 000) form of renin was converted into the high-molecular-weight (60 000) form of renin with sulphydryl oxidation, and the high-molecular-weight form of renin was re-converted into the low-molecular-weight form with a reduction of disulphide bonds in the renal cortical homogenate of the dog. Therefore, the low- and high-molecular-weight forms of renin were interconvertible. 2. The formation of high-molecular-weight form of renin required a renin binding substance which was found to be included in the cytosol fraction of kidney cortex of the dog. 3. The renin binding substance of the dog was unstable to heat and low pH, but vitally resistant to Triton X-100 and chloroform. It did not bind to concanavalin A Sepharose 4B. 4. The renin binding substance was eluted in the molecular-weight region between 156 000 and 60 000 on Sephadex G-200, and such apparent molecular weight was not altered by urea at 4 mol/l; thus molecular weight greater than the theoretically expected value of 20 000 was indicated.

scholarly journals The interrelations between high- and low-molecular-weight forms of normal and mutant (Krabbe-disease) galactocerebrosidase

1980 ◽  
Vol 189 (1) ◽  
pp. 9-15 ◽  
Author(s):  
Yoav Ben-Yoseph ◽  
Melinda Hungerford ◽  
Henry L. Nadler
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Specific Activity ◽  
Polyacrylamide Gel Electrophoresis ◽  
Active Form ◽  
Sodium Dodecyl ◽  
Krabbe Disease ◽  
Low Molecular Weight ◽  
Molecular Weight Form

Galactocerebrosidase (β-d-galactosyl-N-acylsphingosine galactohydrolase; EC 3.2.1.46) activity of brain and liver preparations from normal individuals and patients with Krabbe disease (globoid-cell leukodystrophy) have been separated by gel filtration into four different molecular-weight forms. The apparent mol.wts. were 760000±34000 and 121000±10000 for the high- and low-molecular-weight forms (peaks I and IV respectively) and 499000±22000 (mean±s.d.) and 256000±12000 for the intermediate forms (peaks II and III respectively). On examination by sodium dodecyl sulphate/polyacrylamide-gel electrophoresis, the high- and low-molecular-weight forms revealed a single protein band with a similar mobility corresponding to a mol.wt. of about 125000. Antigenic identity was demonstrated between the various molecular-weight forms of the normal and the mutant galactocerebrosidases by using antisera against either the high- or the low-molecular-weight enzymes. The high-molecular-weight form of galactocerebrosidase was found to possess higher specific activity toward natural substrates when compared with the low-molecular-weight form. It is suggested that the high-molecular-weight enzyme is the active form in vivo and an aggregation process that proceeds from a monomer (mol.wt. approx. 125000) to a dimer (mol.wt. approx. 250000) and from the dimer to either a tetramer (mol.wt. approx. 500000) or a hexamer (mol.wt. approx. 750000) takes place in normal as well as in Krabbe-disease tissues.

scholarly journals High Molecular Weight Factor VIII Coagulant Activity in Cryoprecipitate and Polyethylene Glycol Precipitates

1977 ◽  
Author(s):  
K. A. Rickard ◽  
T. Exner ◽  
H. Kronenberg
Keyword(s):  
Molecular Weight ◽  
Polyethylene Glycol ◽  
Factor Viii ◽  
High Molecular Weight ◽  
Gel Filtration ◽  
Lower Molecular Weight ◽  
Human Antibody ◽  
High Molecular Weight Material ◽  
Coagulant Activity ◽  
Molecular Weight Form

Gel filtration of human plasma cryoprecipitate on Sepharose 2B indicated the molecular weight of factor VIII coagulant activity (VIIIc) to be significantly greater than that found in antihaemophilic concentrate. Polyethylene glycol at 3% concentration precipitated approximately half of the VIIIc from cryoprecipitate. This activity eluted as high molecular weight material on gel filtration. The addition of more polyethylene glycol to a concentration of 8% precipitated most of the remaining VIIIc from cryoprecipitate. This activity appeared to be of significantly lower molecular weight, approximately corresponding in elution volume to that observed for antihaemophilic concentrate. The possibility that an antibody to VIIIc generated in a patient treated with cryoprecipitate might be directed against the higher molecular weight form of factor VIII was investigated. However, no significant differences between the higher and lower molecular weight forms of factor VIII either in stability or in reactivity with human antibody to factor VIII were found.

Immunoaffinity Chromatography of Canine High-Molecular-Weight Renin: Partial Purification and Characterization

1983 ◽  
Vol 65 (2) ◽  
pp. 117-120 ◽  
Author(s):  
Fumihiko Ikemoto ◽  
Victor J. Dzau ◽  
Edgar Haber ◽  
Kazuo Takaori ◽  
Kenjiro Yamamoto
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Specific Activity ◽  
Immunoaffinity Chromatography ◽  
Partial Purification ◽  
Low Molecular Weight ◽  
Specific Method ◽  
Disulphide Bonds ◽  
Binding Substance ◽  
Molecular Weight Form

1. Canine high-molecular-weight renin (mol. wt. 60 000) is believed to be a complex of renin (low-molecular-weight form, mol. wt. 40 000) and renin-binding substance. The immunocross-reactivity of high-molecular-weight renin and low-molecular-weight renin was demonstrated by using antibodies specific to low-molecular-weight renin. 2. Immunoaffinity chromatography with renin-specific antibodies coupled to Sepharose provided a simple and specific method for isolation of high-molecular-weight renin. High-molecular-weight renin with a specific activity of 137 600 ng of ANG I h−1 mg−1 of protein (19.6 Goldblatt units/mg of protein) was obtained. 3. This high-molecular-weight renin was stable in dithiothreitol (25 mmol/l), suggesting that disulphide bonds may not be involved in the binding mechanism between low-molecular-weight renin and renin-binding substance. 4. However, exposure to low pH (3.0) resulted in conversion of high-molecular-weight renin into the low-molecular-weight form.

scholarly journals Digestion of the zinc in human milk, cow's milk and a commercial babyfood: some implications for human infant nutrition

1986 ◽  
Vol 55 (2) ◽  
pp. 209-217 ◽  
Author(s):  
Peter Blakeborough ◽  
Michael I. Gurr ◽  
Dallyn N. Salter
Keyword(s):  
Molecular Weight ◽  
Human Milk ◽  
High Molecular Weight ◽  
Stomach Contents ◽  
Human Infant ◽  
Soluble Form ◽  
Cow’S Milk ◽  
Low Molecular Weight ◽  
Cow's Milk ◽  
Molecular Weight Form

1. The digestion of zinc present in human milk, cow's milk and a commercial babyfood was compared, using the piglet as a model for the human infant.2. In piglets given human milk the pH of stomach contents was approximately 1 and 0.4 units lower than that of animals given respectively cow's milk and babyfood. The pH values of intestinal contents were approximately neutral and did not vary with the type of feed.3. Hard casein curds were present throughout the stomachs and small intestines of animals fed on cow's milk or babyfood and between 55 and 70% Zn in these digesta samples were recovered in an insoluble form by centrifugation. In contrast, little solid material was observed in the digesta of animals fed on human milk, and 57 and 93% respectively of the Zn in digesta were recovered in a soluble form in the stomach and small intestine.4. Soluble fractions prepared by centrifugation of digesta were analysed by filtration on Sephadex G-150. After any of the three feeds, soluble Zn in stomach contents was mainly in a low-molecular-weight form. In intestinal samples, however, Zn was present in low- and high-molecular-weight forms. Whilst there were similar amounts of Zn in the low-molecular-weight form in all samples, approximately three times as much of the total intestinal Zn was in a soluble high-molecular-weight form complexed to proteins in the animals fed on human milk compared with those fed on cow's milk or babyfood.5. Analysis of protein-bound soluble Zn in intestinal samples on SDS-polyacrylamide gels resulted in a similar pattern of proteins for all feeds. Results indicated that at least some of these proteins were derived from intestinal secretions of the piglet.6. Some implications of these results in respect of the mode of digestion of Zn and its biological availability to the human infant are discussed.

Conditions Affecting the Molecular Weight of Factor VIII.

1979 ◽  
Author(s):  
G. Rock ◽  
E. Tackaberry ◽  
D. Palmer
Keyword(s):  
Molecular Weight ◽  
Factor Viii ◽  
High Molecular Weight ◽  
Calcium Concentration ◽  
Low Molecular Weight ◽  
Biochemical Purification ◽  
Molecular Weights ◽  
Will Self ◽  
And Storage ◽  
Molecular Weight Form

By purifying Factor VIII while maintaining physiological concentrations of calcium we have recently demonstrated that about 50% of the procoagulant activity is in a very low molecular weight (VLHW) form not associated with the carrier (VIII: RAG). The remainder is carrier associated and elutes at Vo as a high molecular weight (HMW) compound upon Sepharose 6B chromatography. Reduction of the calcium concentration by increasing the amount of citrate added to heparin results in decreasing the ratio of VLMW:HMW from 1:1 in pure heparin to 1:5 in pure citrate. If citrate is replaced with the more strongly chelating EDTA no VLMW is detectable in the plasma. It has also been found that most of the biochemical purification techniques which have been previously used to prepare Factor VIII for study actually result in the aggregation of this VLMW with the carrier to produce the high molecular weight form. This includes: cryoprecipitation, precipitation by polyethylene glycol and storage -80°C. As well, the VLMW material will self-associate upon freezing to produce an aggregate with a molecular weight of 106. However, this material does not cross-react with rabbit antibody directed against VIII: RAG. The data indicate that many of the previously reported biochemical characteristics, including molecular weights, actually describe species which are artifacts of the isolation process rather than those of the physiologically occuring Factor VIII.

Distribution of radioactive silver in the subcellular fractions of various tissues of the rat and its binding to low molecular weight proteins

1983 ◽  
Vol 61 (11) ◽  
pp. 1391-1395 ◽  
Author(s):  
Yousef Matuk
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Gel Filtration ◽  
Total Radioactivity ◽  
Subcellular Fractions ◽  
Low Molecular Weight ◽  
Electron Microscopic ◽  
Molecular Weight Peak

In view of the electron microscopic evidence that silver does not penetrate cellular barriers, the distribution of radioactive silver in rat blood and subcellular fractions of liver, kidneys, spleen, and forebrain was studied. It was found that 24 h after a single intraperitoneal injection high levels of radioactivity were reached which decreased at different rates in the various tissues studied. In plasma, liver, and kidneys there was an initial rapid loss of radioactivity which was followed by a slower rate of loss. In the blood, forebrain, and spleen the loss of radioactivity was linear and somewhat slower than in the other three tissues. The cytosols of the liver and kidneys contained 60% while those of the forebrain and spleen contained 30% of the total radioactivity found in the tissue homogenates. Gel filtration on Sephadex G-75 showed that all cytosols contained two peaks of radioactivity; a high molecular weight peak which eluted just after the void volume and a low molecular weight peak. The amount of radioactivity in both peaks was, however, much lower in the chromatographic peaks of the forebrain and spleen than that found in those of the liver and kidneys. Furthermore, the spleen had a comparatively very small low molecular weight radioactive peak. In vitro experiments with liver cytosol showed similar results to those found in vivo in that the high molecular weight radioactive peak could be removed by heat. It is concluded that silver does enter cells and that silver thionein exists in the cytosols of forebrain, spleen, kidney, and liver.

Sign in / Sign up

Export Citation Format

Share Document