scholarly journals Celecoxib-loaded liposomes: effect of cholesterol on encapsulation and in vitro release characteristics

2010 ◽  
Vol 30 (5) ◽  
pp. 365-373 ◽  
Author(s):  
Asli Deniz ◽  
Asli Sade ◽  
Feride Severcan ◽  
Dilek Keskin ◽  
Aysen Tezcaner ◽  
...  
Keyword(s):  
Drug Loading ◽  
In Vitro Release ◽  
Cholesterol Content ◽  
High Plasma ◽  
Hydrophobic Core ◽  
Scanning Calorimetry ◽  
Liposome Size ◽  
Systemic Side Effects ◽  
Highly Hydrophobic

CLX (celecoxib) is a highly hydrophobic non-steroidal anti-inflammatory drug with high plasma protein binding. We describe here the encapsulation of CLX in MLVs (multilamellar vesicles) composed of DSPC (1,2-distearoyl-sn-glycero-3-phosphocholine) and variable amounts of cholesterol. The effects of cholesterol content on liposome size, percentage drug loading and in vitro drug release profiles were investigated. Differential scanning calorimetry and FTIR (Fourier-transform infrared) spectroscopy were used to determine molecular interactions between CLX, cholesterol and DSPC. The phase transition temperature (Tm) of vesicles was reduced in a synergistic manner in the presence of both CLX and cholesterol. Encapsulation efficiency, loading and release of CLX decreased with increasing cholesterol content. FTIR results indicated that this decrease was due to a competition between CLX and cholesterol for the co-operativity region of the phospholipids. In the presence of cholesterol, CLX was pushed further into the hydrophobic core of the bilayer. However, MLVs prepared with DSPC only (without cholesterol) exhibited the lowest ability for drug retention after 72 h. Our results indicated that CLX, without the requirement of modifications to enhance solubilization, can be encapsulated and released from liposomal formulations. This method of drug delivery may be used to circumvent the low bioavailability and systemic side effects of oral CLX formulations.

scholarly journals Preparation and Characterization of PEG-PLA Genistein Micelles Using a Modified Emulsion-Evaporation Method

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Qiuchen Cheng ◽  
Wen Qin ◽  
Yanhong Yu ◽  
Guojian Li ◽  
Jizhou Wu ◽  
...  
Keyword(s):  
Smooth Muscle Actin ◽  
Drug Loading ◽  
In Vitro Release ◽  
Tween 80 ◽  
Original Method ◽  
Scanning Calorimetry ◽  
Experimental Conditions ◽  
Evaporation Method ◽  
Genistein Treatment

The objective of this study is to improve the bioavailability of genistein by encapsulation with polyethylene glycol-polylactic acid (PEG-PLA) copolymers. Genistein micelles (GMs) prepared using a modified emulsion-evaporation method were more stable than those made with the original method. The effect of polyvinyl alcohol, Tween 80, sonication time, PEG-PLA/genistein ratio, and organic phase (acetone)/H2O ratio on the size, polydispersity index, encapsulation efficiency, and drug loading efficiency of GMs was investigated. GMs were obtained and characterized under optimal experimental conditions. For long-term storage, GMs were lyophilized by freeze drying with trehalose to produce genistein lyophilized powder (GLP). The analysis of GLP by Fourier-transform infrared spectroscopy and differential scanning calorimetry showed that genistein was successfully incorporated into the micellar structure. In vitro release experiments revealed that the incorporation of genistein into PEG-PLA copolymers significantly improved its solubility and bioavailability. GLP was more potent in inhibiting the proliferation of HSC-T6 cells than genistein. Treatment with GLP at 10–20 μg/mL for 48 h significantly inhibited the protein expression of α-smooth muscle actin and collagen I in HSC-T6 cells compared with the control. These data demonstrated that the improved solubility and bioavailability of genistein in the form of GLP enhanced its antifibrotic effect in vitro.

scholarly journals Enhancement of the dissolution profile of the diuretic hydrochlorothiazide by elaboration of microspheres

2018 ◽  
Vol 83 (11) ◽  
pp. 1243-1259
Author(s):  
Oum Larbi ◽  
Haouaria Merine ◽  
Youssef Ramli ◽  
Fawzia Toumi ◽  
Kaddour Guemra ◽  
...  
Keyword(s):  
Ftir Spectroscopy ◽  
Release Kinetics ◽  
Drug Loading ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Xrd Analysis ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Scanning Calorimetry

Hydrochlorothiazide (HCTZ), which was developed and introduced in the late 1950s, is still one of the most frequently employed drugs in antihypertensive treatments. Its poor aqueous solubility is one of the reasons for its limited bioavailability after oral administration. The present paper provides details of the preparation of HCTZ-loaded microspheres by the solvent evaporation technique. A total of seven formulations were prepared using ethyl cellulose, poly(?-caprolactone) (PCL), ?-cyclodextrin (?-CD) and synthesized poly-(methyl methacrylate) (PMMA) of different molecular weights in different drug-to-carrier ratios in order to investigate their effect on the encapsulation efficiency and drug release kinetics. The prepared formulations were characterized by Fourier transform-infrared (FTIR) spectroscopy, powder X-ray diffractometry, differential scanning calorimetry, yield, drug loading, optical microscopy, surface morphology by scanning electron microscopy (SEM), and in vitro release studies in simulated gastrointestinal tract fluid. The loading efficiency was found in the range from 18?0.34 to 39?0.95 %. The microspheres were spherical, and the mean Sauter diameter (d32) of the obtained microparticles ranged from 26?0.16 to 107?0.58 ?m. The presence of the drug and polymer carriers in the microparticles was confirmed by FTIR spectroscopy and XRD analysis. In vitro dissolution studies showed that the release rate was largely affected by the characteristics of the microparticles, namely the particle size and the nature of the matrix. The release data are best fitted to the Higuchi model with high correlation coefficients (r?).

A Comparative Study of Acyclovir icroencapsulation by Novel Solvent Evaporation-Matrix Erosion and Spray Drying Techniques

2012 ◽  
Vol 5 (1) ◽  
pp. 1627-1637
Author(s):  
J P Raval ◽  
D R Naik
Keyword(s):  
Spray Drying ◽  
Ethyl Cellulose ◽  
Drug Loading ◽  
In Vitro Release ◽  
Spherical Geometry ◽  
Solvent Evaporation ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Spray Dried

Designing and evaluating a multiparticulate controlled release dosage form, to increase the efficacy of acyclovir (a selective antiherpes agent). Spray drying technique for microsphere production is compared with novel solvent evaporation-matrix erosion technique for variable drug loading in different concentration of ethyl cellulose. The microspheres were characterized for physicochemical properties. The microspheres sizes were ranged from 7-25 μm. The spray dried microspheres had better encapsulation efficiency (up to 91%) compared to that of novel solvent evaporation-matrix erosion technique microspheres. Scanning electron microscopy confirmed spherical geometry due to high cross-linking density. Differential scanning calorimetry, Fourier-transform infrared spectroscopy and x-ray diffraction studies showed chemical stability and intactness of entrapped drug in the microspheres. In vitro release of acyclovir from spray dried microspheres continued for longer period compared to novel solvent evaporation-matrix erosion method. Overall, the release studies depended on the concentration of ethyl cellulose, extent of drug loading, and the technique used to prepare microspheres. Thus, marked retardation of drug release may provide a useful effective anti-retroviral drug therapy.  

scholarly journals Polymeric Microparticles as Alternative Carriers for Antidiabetic Glibenclamide Drug

2020 ◽  
Author(s):  
Panoraia I. Siafaka ◽  
Emre Şefik Cağlar ◽  
Katerina Papadopoulou ◽  
Vasilios Tsanaktsis ◽  
Ioannis D. Karantas ◽  
...  
Keyword(s):  
Oral Delivery ◽  
Drug Loading ◽  
In Vitro Release ◽  
Scanning Calorimetry ◽  
Crystal Properties ◽  
Physicochemical Evaluation ◽  
Polymeric Microparticles ◽  
Low Mass ◽  
Type 2 Diabetes Treatment

Background: Glibenclamide is a lipophilic drug widely used in type 2 diabetes treatment. However, its low bioavailability limits its use. Thus, novel formulations should be applied to improve the drug’s bioavailability. Objectives: This study aimed to develop alternative carriers for oral delivery of glibenclamide. For this purpose, two biocompatible polymers, poly(e-caprolactone) and poly(butylene adipate) were formulated as microparticles (MPs) capable of loading the antidiabetic drug. Methods: In this regard, as microparticle fabrication approach, the modified emulsion solvent evaporation method was applied. Physicochemical evaluation of the prepared microparticles included the examination of their morphology, degradation rate, and thermal properties. Drug entrapment, drug loading, and particle size were also investigated. Simulated intestinal medium and body fluid at 37oC were selected as dissolution media. Differential scanning calorimetry was used to investigate the crystal properties of the microparticles and drugs. Results: The developed microparticles had sizes between 0.5 and 4 μm. Poly(butylene adipate) based microparticles had a smooth surface, whereas poly(ε-caprolactone) based microparticles showed a porous surface. The DSC thermogram revealed the amorphization of the drug. Hydrolysis results exhibited a very low mass loss, while in vitro release results depicted that the dissolution rate of the prepared microparticles was higher than that of pure glibenclamide demonstrating a prolonged pattern which is ideal for minimizing the daily dose of glibenclamide. Conclusion: In this study, novel carriers for glibenclamide were successfully prepared with promising future use.

scholarly journals Chitosan-Graft-Poly(N-Isopropylacrylamide)/PVA Cryogels as Carriers for Mucosal Delivery of Voriconazole

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1432 ◽  
Author(s):  
Cheaburu-Yilmaz ◽  
Yilmaz ◽  
Kose ◽  
Bibire
Keyword(s):  
Storage Stability ◽  
Flow Behavior ◽  
Drug Loading ◽  
Thermal Studies ◽  
In Vitro Release ◽  
Loading Capacity ◽  
Scanning Calorimetry ◽  
Adhesion Properties ◽  
Vitro Release

The objective of this study was to prepare and characterize physically crosslinked gel formulations of chitosan (CS)-graft-poly(N-isopropyl acrylamide) (PNIPAAm) and polyvinyl alcohol (PVA) for smart delivery of an antifungal drug, Voriconazole, for mucosal applications. For this purpose, cryogels of CS-g-PNIPAAm/PVA and CS/PVA were tested by means of texture profile analysis and rheology to determine optimal matrix properties for topical application. The ratio of 75/25 v/v % CS-g-PNIPAAm/PVA was selected to be used for formulation since it gave low compressibility and hardness (1.2 and 0.6 N) as well as high adhesion properties and non-Newtonian flow behavior. The cryogels and formulations were further characterized by means of FTIR spectroscopy, swelling behavior, texture analysis, scanning electron microscopy (SEM), thermal (differential scanning calorimetry (DSC) and TGA), and rheological behavior. The drug loading capacity and in vitro release profile of the drug, storage stability, and cytotoxicity tests were also performed for the gel formulation. The FTIR, DSC, and TGA results verified the successful formation of cryogels. Swelling studies revealed a pH-dependent swelling ability with a maximum swelling degree of 1200% in acid and 990% in phosphate buffer (pH 7.4). Thermal studies showed that CS-g-PNIPAAm/PVA 75/25 had higher thermal stability proving the structural complexity of the polymer. The loading capacity of Voriconazole was found to be 70% (w/w). The in vitro release profiles of Voriconazole showed Fickian release behavior for CS-g-PNIPAAm/PVA 75/25 gel with an approximate delivery of 38% within 8 h, slower than matrices containing unmodified chitosan. The storage stability test exhibited that the gel formulation was still stable even after aging for two months. Moreover, the cell culture assays revealed a non-toxic character of the polymeric matrix. Overall results showed that the CS-g-PNIPAAm/PVA 75/25 hydrogel has the potential to be used as a smart polymeric vehicle for topical applications.

scholarly journals Sequential Release of Paclitaxel and Imatinib from Core–Shell Microparticles Prepared by Coaxial Electrospray for Vaginal Therapy of Cervical Cancer

2021 ◽  
Vol 22 (16) ◽  
pp. 8760
Author(s):  
Zhepeng Liu ◽  
Haini Chen ◽  
Fengmei Lv ◽  
Jun Wang ◽  
Shoujin Zhao ◽  
...  
Keyword(s):  
Cervical Cancer ◽  
Drug Loading ◽  
In Vitro Release ◽  
Sodium Hyaluronate ◽  
Cellular Growth ◽  
Core Shell ◽  
Scanning Calorimetry ◽  
Sequential Release ◽  
Coaxial Electrospray

To optimize the anti-tumor efficacy of combination therapy with paclitaxel (PTX) and imatinib (IMN), we used coaxial electrospray to prepare sequential-release core–shell microparticles composed of a PTX-loaded sodium hyaluronate outer layer and an IMN-loaded PLGA core. The morphology, size distribution, drug loading, differential scanning calorimetry (DSC), Fourier transform infrared spectra (FTIR), in vitro release, PLGA degradation, cellular growth inhibition, in vivo vaginal retention, anti-tumor efficacy, and local irritation in a murine orthotopic cervicovaginal tumor model after vaginal administration were characterized. The results show that such core–shell microparticles were of spherical appearance, with an average size of 14.65 μm and a significant drug-loading ratio (2.36% for PTX, 19.5% for IMN, w/w), which might benefit cytotoxicity against cervical-cancer-related TC-1 cells. The DSC curves indicate changes in the phase state of PTX and IMN after encapsulation in microparticles. The FTIR spectra show that drug and excipients are compatible with each other. The release profiles show sequential characteristics in that PTX was almost completely released in 1 h and IMN was continuously released for 7 days. These core–shell microparticles showed synergistic inhibition in the growth of TC-1 cells. Such microparticles exhibited prolonged intravaginal residence, a >90% tumor inhibitory rate, and minimal mucosal irritation after intravaginal administration. All results suggest that such microparticles potentially provide a non-invasive local chemotherapeutic delivery system for the treatment of cervical cancer by the sequential release of PTX and IMN.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Preparation and in vitro Evaluation of Bioadhesive Microparticulate System

1970 ◽  
Vol 1 (3) ◽  
pp. 257-266
Author(s):  
Nagda C. D. ◽  
Chotai N. P. ◽  
Patel S. B. ◽  
Soni T. J ◽  
Patel U. L
Keyword(s):  
Drug Loading ◽  
In Vitro Release ◽  
Phenyl Acetic Acid ◽  
Solvent Evaporation Method ◽  
Elimination Half ◽  
Release Studies ◽  
Differential Scanning Colorimetry ◽  
Polymer Interactions ◽  
Vitro Release

Aceclofenac (ACE) is NSAIDs of a phenyl acetic acid class. It is indicated in arthritis and osteoarthritis, rheumatoid arthritis, ankylosing spondylitis. It has short elimination half life of 4 hours. The objective of the study is to design, characterize and evaluate bioadhesive microspheres of ACE employing carbopol (CP) as bioadhesive polymer. Bioadhesive microspheres of ACE were prepared by solvent evaporation method. The prepared microspheres were free flowing and spherical in shape and characterized for drug loading, mucoadhesion test, infrared spectroscopy (IR), differential scanning colorimetry (DSC) and scanning electron microscopy (SEM). The in-vitro release studies were performed using pH 6.8 phosphate buffer. The drug loaded microspheres in a ratio of 1:5 showed 47% of drug entrapment; percentage mucoadhesion was 81% and 89% release in 10 h. The infrared spectra and DSC showed stable character of aceclofenac in the drug loaded microspheres and revealed the absence of drug-polymer interactions. SEM studies showed that the microspheres are spherical and porous in nature. The in vitro release profiles from microspheres of different polymer-drug ratios followed Higuchi model.

Preparation, evaluation, and in vitro release of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules

2020 ◽  
pp. 1-9
Author(s):  
Yunhong Wang ◽  
Rong Hu ◽  
Yanlei Guo ◽  
Weihan Qin ◽  
Xiaomei Zhang ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Orthogonal Design ◽  
Drug Loading ◽  
In Vitro Release ◽  
Core Material ◽  
Evaluation Indexes ◽  
Vitro Release

OBJECTIVE: In this study we explore the method to prepare tanshinone self-microemulsifying sustained-release microcapsules using tanshinone self-microemulsion as the core material, and chitosan and alginate as capsule materials. METHODS: The optimal preparation technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules was determined by using the orthogonal design experiment and single-factor analysis. The drug loading and entrapment rate were used as evaluation indexes to assess the quality of the drug, and the in vitro release rate was used to evaluate the drug release performance. RESULTS: The best technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules is as follows: the concentration of alginate is 1.5%, the ratio of tanshinone self-microemulsion volume to alginate volume to chitosan mass is 1:1:0.5 (ml: ml: g), and the best concentration of calcium chloride is 2.0%. To prepare the microcapsules using this technology, the drug loading will be 0.046%, the entrapment rate will be 80.23%, and the 24-hour in vitro cumulative release rate will be 97.4%. CONCLUSION: The release of the microcapsules conforms to the Higuchi equation and the first-order drug release model and has a good sustained-release performance.

scholarly journals Development of Spanish Broom and Flax Dressings with Glycyrrhetinic Acid-Loaded Films for Wound Healing: Characterization and Evaluation of Biological Properties

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1192
Author(s):  
Angela Abruzzo ◽  
Concettina Cappadone ◽  
Valentina Sallustio ◽  
Giovanna Picone ◽  
Martina Rossi ◽  
...  
Keyword(s):  
Wound Healing ◽  
Drug Loading ◽  
Healing Process ◽  
In Vitro Release ◽  
Sodium Hyaluronate ◽  
Biological Properties ◽  
Glycyrrhetinic Acid ◽  
Wound Dressings ◽  
Biological Studies

The selection of an appropriate dressing for each type of wound is a very important procedure for a faster and more accurate healing process. So, the aim of this study was to develop innovative Spanish Broom and flax wound dressings, as alternatives to cotton used as control, with polymeric films containing glycyrrhetinic acid (GA) to promote wound-exudate absorption and the healing process. The different wound dressings were prepared by a solvent casting method, and characterized in terms of drug loading, water uptake, and in vitro release. Moreover, biological studies were performed to evaluate their biocompatibility and wound-healing efficacy. Comparing the developed wound dressings, Spanish Broom dressings with GA-loaded sodium hyaluronate film had the best functional properties, in terms of hydration ability and GA release. Moreover, they showed a good biocompatibility, determining a moderate induction of cell proliferation and no cytotoxicity. In addition, the wound-healing test revealed that the Spanish Broom dressings promoted cell migration, further facilitating the closure of the wound.

Sign in / Sign up

Export Citation Format

Share Document