Glycosylation by Pichia pastoris decreases the affinity of a family 2a carbohydrate-binding module from Cellulomonas fimi: a functional and mutational analysis

2001 ◽  
Vol 358 (2) ◽  
pp. 423-430 ◽  
Author(s):  
Alisdair B. BORASTON ◽  
R. Antony J. WARREN ◽  
Douglas G. KILBURN
Keyword(s):  
Pichia Pastoris ◽  
Association Constant ◽  
Mutational Analysis ◽  
Carbohydrate Binding ◽  
Carbohydrate Binding Module ◽  
Wild Type ◽  
Cellulomonas Fimi ◽  
E Coli ◽  
Glycosylation Sites ◽  
High Mannose

When produced by Pichia pastoris, three of the five Asn-Xaa-Ser/Thr sequences (corresponding to Asn-24, Asn-73 and Asn-87) in the carbohydrate-binding module CBM2a of xylanase 10A from Cellulomonas fimi are glycosylated. The glycans are of the high-mannose type, ranging in size from GlcNAc2Man8 to GlcNAc2Man14. The N-linked glycans block the binding of CBM2a to cellulose. Analysis of mutants of CBM2a shows that glycans on Asn-24 decrease the association constant (Ka) for the binding of CBM2a to bacterial microcrystalline cellulose approx. 10-fold, whereas glycans on Asn-87 destroy binding. The Ka of a mutant of CBM2a lacking all three N-linked glycosylation sites is the same when the polypeptide is produced by either Escherichia coli or P. pastoris and is approx. half that of wild-type CBM2a produced by E. coli.

scholarly journals Spontaneous Cleavages of a Heterologous Protein, the CenA Endoglucanase of Cellulomonas fimi, in Escherichia coli

2021 ◽  
Vol 14 ◽  
pp. 117863612110246
Author(s):  
Cheuk Yin Lai ◽  
Ka Lun Ng ◽  
Hao Wang ◽  
Chui Chi Lam ◽  
Wan Keung Raymond Wong
Keyword(s):  
Escherichia Coli ◽  
Cellulolytic Bacterium ◽  
Systematic Screening ◽  
Cellulomonas Fimi ◽  
E Coli ◽  
Substrate Complex ◽  
Enzyme Substrate ◽  
Glycosylation Sites ◽  
Endogenous Proteins ◽  
Cellulose Binding

CenA is an endoglucanase secreted by the Gram-positive cellulolytic bacterium, Cellulomonas fimi, to the environment as a glycosylated protein. The role of glycosylation in CenA is unclear. However, it seems not crucial for functional activity and secretion since the unglycosylated counterpart, recombinant CenA (rCenA), is both bioactive and secretable in Escherichia coli. Using a systematic screening approach, we have demonstrated that rCenA is subjected to spontaneous cleavages (SC) in both the cytoplasm and culture medium of E. coli, under the influence of different environmental factors. The cleavages were found to occur in both the cellulose-binding (CellBD) and catalytic domains, with a notably higher occurring rate detected in the former than the latter. In CellBD, the cleavages were shown to occur close to potential N-linked glycosylation sites, suggesting that these sites might serve as ‘attributive tags’ for differentiating rCenA from endogenous proteins and the points of initiation of SC. It is hypothesized that glycosylation plays a crucial role in protecting CenA from SC when interacting with cellulose in the environment. Subsequent to hydrolysis, SC would ensure the dissociation of CenA from the enzyme-substrate complex. Thus, our findings may help elucidate the mechanisms of protein turnover and enzymatic cellulolysis.

scholarly journals Disulfide bond engineering of AppA phytase for increased thermostability requires co-expression of protein disulfide isomerase in Pichia pastoris

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Laura Navone ◽  
Thomas Vogl ◽  
Pawarisa Luangthongkam ◽  
Jo-Anne Blinco ◽  
Carlos H. Luna-Flores ◽  
...  
Keyword(s):  
Pichia Pastoris ◽  
Phytic Acid ◽  
Disulfide Bond ◽  
Wild Type ◽  
Wild Type Enzyme ◽  
E Coli ◽  
Biochemical Characterisation ◽  
Disulfide Bond Isomerase ◽  
Microbial Systems ◽  
Protein Disulfide

Abstract Background Phytases are widely used commercially as dietary supplements for swine and poultry to increase the digestibility of phytic acid. Enzyme development has focused on increasing thermostability to withstand the high temperatures during industrial steam pelleting. Increasing thermostability often reduces activity at gut temperatures and there remains a demand for improved phyases for a growing market. Results In this work, we present a thermostable variant of the E. coli AppA phytase, ApV1, that contains an extra non-consecutive disulfide bond. Detailed biochemical characterisation of ApV1 showed similar activity to the wild type, with no statistical differences in kcat and KM for phytic acid or in the pH and temperature activity optima. Yet, it retained approximately 50% activity after incubations for 20 min at 65, 75 and 85 °C compared to almost full inactivation of the wild-type enzyme. Production of ApV1 in Pichia pastoris (Komagataella phaffi) was much lower than the wild-type enzyme due to the presence of the extra non-consecutive disulfide bond. Production bottlenecks were explored using bidirectional promoters for co-expression of folding chaperones. Co-expression of protein disulfide bond isomerase (Pdi) increased production of ApV1 by ~ 12-fold compared to expression without this folding catalyst and restored yields to similar levels seen with the wild-type enzyme. Conclusions Overall, the results show that protein engineering for enhanced enzymatic properties like thermostability may result in folding complexity and decreased production in microbial systems. Hence parallel development of improved production strains is imperative to achieve the desirable levels of recombinant protein for industrial processes.

scholarly journals Mutational Analysis of Ocriplasmin to Reduce Proteolytic and Autolytic Activity in Pichia pastoris

2020 ◽  
Vol 22 (1) ◽  
Author(s):  
Roghayyeh Baghban ◽  
Safar Farajnia ◽  
Younes Ghasemi ◽  
Reyhaneh Hoseinpoor ◽  
Azam Safary ◽  
...  
Keyword(s):  
Pichia Pastoris ◽  
Proteolytic Activity ◽  
Mutational Analysis ◽  
Expression System ◽  
Catalytic Efficiency ◽  
Site Directed Mutagenesis ◽  
Wild Type ◽  
Vitreomacular Adhesion ◽  
Autolytic Activity

Abstract Background Ocriplasmin (Jetrea) is using for the treatment of symptomatic vitreomacular adhesion. This enzyme undergoes rapid inactivation and limited activity duration as a result of its autolytic nature after injection within the eye. Moreover, the proteolytic activity can cause photoreceptor damage, which may result in visual impairment in more serious cases. Results The present research aimed to reduce the disadvantages of ocriplasmin using site-directed mutagenesis. To reduce the autolytic activity of ocriplasmin in the first variant, lysine 156 changed to glutamic acid and, in the second variant for the proteolytic activity reduction, alanine 59 mutated to threonine. The third variant contained both mutations. Expression of wild type and three mutant variants of ocriplasmin constructs were done in the Pichia pastoris expression system. The mutant variants were analyzed in silico and in vitro and compared to the wild type. The kinetic parameters of ocriplasmin variants showed both variants with K156E substitution were more resistant to autolytic degradation than wild-type. These variants also exhibited reduced Kcat and Vmax values. An increase in their Km values, leading to a decreased catalytic efficiency (the Kcat/Km ratio) of autolytic and mixed variants. Moreover, in the variant with A59T mutation, Kcat and Vmax values have reduced compared to wild type. The mix variants showed the most increase in Km value (almost 2-fold) as well as reduced enzymatic affinity to the substrate. Thus, the results indicated that combined mutations at the ocriplasmin sequence were more effective compared with single mutations. Conclusions The results indicated such variants represent valuable tools for the investigation of therapeutic strategies aiming at the non-surgical resolution of vitreomacular adhesion.

scholarly journals Novel xylan-binding properties of an engineered family 4 carbohydrate-binding module

2007 ◽  
Vol 406 (2) ◽  
pp. 209-214 ◽  
Author(s):  
Lavinia Cicortas Gunnarsson ◽  
Cedric Montanier ◽  
Richard B. Tunnicliffe ◽  
Mike P. Williamson ◽  
Harry J. Gilbert ◽  
...  
Keyword(s):  
Ligand Binding ◽  
Binding Site ◽  
Hydrophobic Interactions ◽  
Molecular Engineering ◽  
Carbohydrate Binding ◽  
Carbohydrate Binding Module ◽  
Wild Type ◽  
Rhodothermus Marinus ◽  
Binding Properties ◽  
Carbohydrate Binding Modules

Molecular engineering of ligand-binding proteins is commonly used for identification of variants that display novel specificities. Using this approach to introduce novel specificities into CBMs (carbohydrate-binding modules) has not been extensively explored. Here, we report the engineering of a CBM, CBM4-2 from the Rhodothermus marinus xylanase Xyn10A, and the identification of the X-2 variant. As compared with the wild-type protein, this engineered module displays higher specificity for the polysaccharide xylan, and a lower preference for binding xylo-oligomers rather than binding the natural decorated polysaccharide. The mode of binding of X-2 differs from other xylan-specific CBMs in that it only has one aromatic residue in the binding site that can make hydrophobic interactions with the sugar rings of the ligand. The evolution of CBM4-2 has thus generated a xylan-binding module with different binding properties to those displayed by CBMs available in Nature.

scholarly journals Mutational Analysis of Ocriplasmin to Reduce Proteolytic and Autolytic Activity in Pichia Pastoris

2020 ◽  
Author(s):  
Roghayyeh Baghban ◽  
Safar Farajnia ◽  
Younes Ghasemi ◽  
Reyhaneh Hoseinpoor ◽  
Azam Safary ◽  
...  
Keyword(s):  
Pichia Pastoris ◽  
Mutational Analysis ◽  
Expression System ◽  
Catalytic Efficiency ◽  
Site Directed Mutagenesis ◽  
Wild Type ◽  
Vitreomacular Adhesion ◽  
Km Value ◽  
Autolytic Activity

Abstract Background: Ocriplasmin (Jetrea) is using for the treatment of symptomatic vitreomacular adhesion. This enzyme undergoes rapid inactivation and limited activities duration as a result of its autolytic and proteolytic nature after injection within the eye. Moreover, the proteolytic activities can cause photoreceptor damage, which may result in visual impairment in the more serious cases.Results: The present research aimed to reduce the disadvantages of ocriplasmin using site-directed mutagenesis. To reduce the autolytic activity of ocriplasmin in the first variant, lysine 156 changed to glutamic acid and in the second variant for the proteolytic activity reduction, alanine 59 mutated to threonine. The third variant contained both the mutations. Expression of wild type and three mutant variants of ocriplasmin constructs were done in Pichia pastoris expression system. The mutant variants analyzed in silico and in vitro and compared to the wild type. The kinetic parameters of ocriplasmin variants showed both variants with K156E substitution were more resistant to autolytic degradation than wild-type. These variants also exhibited reduced Kcat and Vmax values. An increase in their Km values, leading to a decreased catalytic efficiency (the Kcat/Km ratio) of autolytic and mix variants. Moreover, in variant with A59T mutation, Kcat and Vmax values have reduced compared to wild type. The mix variants showed the most increase in Km value (almost 2-fold) as well as reduced enzymatic affinity to the substrate. Thus, the results indicated combine mutations at ocriplasmin sequence were more effective compared with single mutations. Conclusions: The results indicated such variants represent valuable tools for the investigation of therapeutic strategies aiming at non-surgical resolution of vitreomacular adhesion.

O-Glycosylation of a Recombinant Carbohydrate-Binding Module Mutant Secreted by Pichia pastoris

2003 ◽  
Vol 5 (1) ◽  
pp. 29-36 ◽  
Author(s):  
Alisdair B. Boraston ◽  
Linda E. Sandercock ◽  
R. Antony J. Warren ◽  
Douglas G. Kilburn
Keyword(s):  
Pichia Pastoris ◽  
Carbohydrate Binding ◽  
Carbohydrate Binding Module

Identification and glucan-binding properties of a new carbohydrate-binding module family

2001 ◽  
Vol 361 (1) ◽  
pp. 35-40 ◽  
Author(s):  
Alisdair B. BORASTON ◽  
Mazyar GHAFFARI ◽  
R. Antony J. WARREN ◽  
Douglas G. KILBURN
Keyword(s):  
Association Constant ◽  
Association Constants ◽  
Carbohydrate Binding ◽  
Carbohydrate Binding Module ◽  
Bacillus Sp ◽  
Binding Properties ◽  
Alkalophilic Bacillus ◽  
Binding Subsites

The C-terminal 191-residue module of Cel5A from the alkalophilic Bacillus sp. 1139 comprises a carbohydrate-binding module (CBM) belonging to a previously unidentified family that we have classified as CBM family 28. This example, called CBM28, bound specifically to cello-oligosaccharides and mixed β-(1,3)(1,4)-glucans (barley β-glucan) with association constants of approximately (1–4)×104 M−1. Its binding to barley β-glucan was remarkably insensitive to pH between 7.0 and 10.9, in keeping with its alkalophilic source. CBM28 bound to cellulose having a significant non-crystalline content with an association constant similar to that for its binding to soluble glucans. CBM17 (CBM family 17) and CBM28 modules naturally occur as tandems. The CBM17/CBM28 tandem from Cel5A bound with apparent co-operativity to barley β-glucan. The association of CBM28 with cello-oligosaccharides was driven enthalpically and marked by the different thermodynamic contribution of three putative binding subsites that accommodate a cellohexaose molecule.

Production and purification of the isolated family 2a carbohydrate-binding module from Cellulomonas fimi

2009 ◽  
Vol 64 (1) ◽  
pp. 63-68 ◽  
Author(s):  
Haiqiang Jing ◽  
Darrell Cockburn ◽  
Qinxian Zhang ◽  
Anthony J. Clarke
Keyword(s):  
Carbohydrate Binding ◽  
Carbohydrate Binding Module ◽  
Cellulomonas Fimi

A Family 2a Carbohydrate-Binding Module Suitable as an Affinity Tag for Proteins Produced in Pichia pastoris

2001 ◽  
Vol 21 (3) ◽  
pp. 417-423 ◽  
Author(s):  
Alisdair B. Boraston ◽  
Bradley W. McLean ◽  
Marta M. Guarna ◽  
Emily Amandaron-Akow ◽  
Douglas G. Kilburn
Keyword(s):  
Pichia Pastoris ◽  
Carbohydrate Binding ◽  
Carbohydrate Binding Module ◽  
Affinity Tag
Sign in / Sign up

Export Citation Format

Share Document