scholarly journals Sound attenuation of polymerizing actin reflects supramolecular structures: viscoelastic properties of actin gels modified by cytochalasin D, profilin and α-actinin

2001 ◽  
Vol 355 (3) ◽  
pp. 771-778 ◽  
Author(s):  
Oliver WAGNER ◽  
Herwig SCHÜLER ◽  
Peter HOFMANN ◽  
David LANGER ◽  
Peter DANCKER ◽  
...  
Keyword(s):  
Sound Velocity ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Cytochalasin D ◽  
Supramolecular Structures ◽  
Lag Phase ◽  
Acoustic Attenuation ◽  
Ultrasound Attenuation ◽  
Actin Concentration

Polymerization and depolymerization of cytoskeletal elements maintaining cytoplasmic stiffness are key factors in the control of cell crawling. Rheometry is a significant tool in determining the mechanical properties of the single elements in vitro. Viscoelasticity of gels formed by these polymers strongly depends on both the length and the associations of the filaments (e.g. entanglements, annealings and side-by-side associations). Ultrasound attenuation is related to viscosity, sound velocity and supramolecular structures in the sample. In combination with a small glass fibre (2mm×50µm), serving as a viscosity sensor, an acoustic microscope was used to measure the elasticity and acoustic attenuation of actin solutions. Changes in acoustic attenuation of polymerizing actin by far exceed the values expected from calculations based on changes in viscosity and sound velocity. During the lag-phase of actin polymerization, attenuation slightly decreases, depending on actin concentration. After the half-maximum viscosity is accomplished and elasticity turns into steady state, attenuation distinctly rises. Changes in ultrasound attenuation depend on actin concentration, and they are modulated by the addition of α-actinin, cytochalasin D and profilin. Thus absorption and scattering of sound on the polymerization of actin is related to the packing density of the actin net, entanglements and the length of the actin filaments. Shortening of actin filaments by cytochalasin D was also confirmed by electron micrographs and falling-ball viscosimetry. In addition to viscosity and elasticity, the attenuation of sound proved to be a valuable parameter in characterizing actin polymerization and the supramolecular associations of F-actin.

scholarly journals Nebulin Interacts with CapZ and Regulates Thin Filament Architecture within the Z-Disc

2008 ◽  
Vol 19 (5) ◽  
pp. 1837-1847 ◽  
Author(s):  
Christopher T. Pappas ◽  
Nandini Bhattacharya ◽  
John A. Cooper ◽  
Carol C. Gregorio
Keyword(s):  
Actin Filaments ◽  
Thin Filament ◽  
Actin Polymerization ◽  
Striated Muscle ◽  
Solid Phase ◽  
Molecular Model ◽  
Direct Interaction ◽  
Tryptophan Fluorescence ◽  
Actin Binding

The barbed ends of actin filaments in striated muscle are anchored within the Z-disc and capped by CapZ; this protein blocks actin polymerization and depolymerization in vitro. The mature lengths of the thin filaments are likely specified by the giant “molecular ruler” nebulin, which spans the length of the thin filament. Here, we report that CapZ specifically interacts with the C terminus of nebulin (modules 160–164) in blot overlay, solid-phase binding, tryptophan fluorescence, and SPOTs membrane assays. Binding of nebulin modules 160–164 to CapZ does not affect the ability of CapZ to cap actin filaments in vitro, consistent with our observation that neither of the two C-terminal actin binding regions of CapZ is necessary for its interaction with nebulin. Knockdown of nebulin in chick skeletal myotubes using small interfering RNA results in a reduction of assembled CapZ, and, strikingly, a loss of the uniform alignment of the barbed ends of the actin filaments. These data suggest that nebulin restricts the position of thin filament barbed ends to the Z-disc via a direct interaction with CapZ. We propose a novel molecular model of Z-disc architecture in which nebulin interacts with CapZ from a thin filament of an adjacent sarcomere, thus providing a structural link between sarcomeres.

Side-chain amino acid based cationic polymer induced actin polymerization

2017 ◽  
Vol 5 (6) ◽  
pp. 1218-1226 ◽  
Author(s):  
Binoy Maiti ◽  
Priyanka Dutta ◽  
Soma Seal ◽  
Sunirmal Pal ◽  
Priyadarsi De ◽  
...  
Keyword(s):  
Amino Acid ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Cationic Polymer ◽  
Side Chain

A side-chain amino acid (alanine) based cationic polymer is able to nucleate, polymerize and stabilize actin filaments in vitro and in vivo.

scholarly journals Processive capping by formin suggests a force-driven mechanism of actin polymerization

2004 ◽  
Vol 167 (6) ◽  
pp. 1011-1017 ◽  
Author(s):  
Michael M. Kozlov ◽  
Alexander D. Bershadsky
Keyword(s):  
Actin Filaments ◽  
Actin Polymerization ◽  
Polymerization Rate ◽  
Elastic Stresses ◽  
Capping Proteins ◽  
Order Of Magnitude ◽  
Cellular Mechanosensing ◽  
Pulling Force ◽  
Actin Concentration

Regulation of actin polymerization is essential for cell functioning. Here, we predict a novel phenomenon—the force-driven polymerization of actin filaments mediated by proteins of the formin family. Formins localize to the barbed ends of actin filaments, but, in contrast to the standard capping proteins, allow for actin polymerization in the barbed direction. First, we show that the mechanism of such “leaky capping” can be understood in terms of the elasticity of the formin molecules. Second, we demonstrate that if a pulling force acts on the filament end via the leaky cap, the elastic stresses can drive actin polymerization. We estimate that a moderate pulling force of ∼3.4 pN is sufficient to reduce the critical actin concentration required for barbed end polymerization by an order of magnitude. Furthermore, the pulling force increases the polymerization rate. The suggested mechanism of force-driven polymerization could be a key element in a variety of cellular mechanosensing devices.

scholarly journals Profilin Enhances Cdc42-Induced Nucleation of Actin Polymerization

2000 ◽  
Vol 150 (5) ◽  
pp. 1001-1012 ◽  
Author(s):  
Changsong Yang ◽  
Minzhou Huang ◽  
John DeBiasio ◽  
Martin Pring ◽  
Michael Joyce ◽  
...  
Keyword(s):  
Actin Filaments ◽  
High Speed ◽  
Actin Polymerization ◽  
Wild Type ◽  
Intact Cells ◽  
Wiskott Aldrich Syndrome ◽  
Acidic Domain ◽  
Syndrome Protein ◽  
High Speed Supernatant ◽  
Actin Concentration

We find that profilin contributes in several ways to Cdc42-induced nucleation of actin filaments in high speed supernatant of lysed neutrophils. Depletion of profilin inhibited Cdc42-induced nucleation; re-addition of profilin restored much of the activity. Mutant profilins with a decreased affinity for either actin or poly-l-proline were less effective at restoring activity. Whereas Cdc42 must activate Wiskott-Aldrich Syndrome protein (WASP) to stimulate nucleation by the Arp2/3 complex, VCA (verpolin homology, cofilin, and acidic domain contained in the COOH-terminal fragment of N-WASP) constitutively activates the Arp2/3 complex. Nucleation by VCA was not inhibited by profilin depletion. With purified N-WASP and Arp2/3 complex, Cdc42-induced nucleation did not require profilin but was enhanced by profilin, wild-type profilin being more effective than mutant profilin with reduced affinity for poly-l-proline. Nucleation by the Arp2/3 complex is a function of the free G-actin concentration. Thus, when profilin addition decreased the free G-actin concentration, it inhibited Cdc42- and VCA-induced nucleation. However, when profilin was added with G-actin in a ratio that maintained the initial free G-actin concentration, it increased the rate of both Cdc42- and VCA-induced nucleation. This enhancement, also seen with purified proteins, was greatest when the free G-actin concentration was low. These data suggest that under conditions present in intact cells, profilin enhances nucleation by activated Arp2/3 complex.

scholarly journals Mechanisms of actin disassembly

2013 ◽  
Vol 24 (15) ◽  
pp. 2299-2302 ◽  
Author(s):  
William Brieher
Keyword(s):  
Actin Cytoskeleton ◽  
Cell Motility ◽  
Actin Filament ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Actin Depolymerization ◽  
Filament Dynamics ◽  
Physiological Demands ◽  
In Cells

The actin cytoskeleton is constantly assembling and disassembling. Cells harness the energy of these turnover dynamics to drive cell motility and organize cytoplasm. Although much is known about how cells control actin polymerization, we do not understand how actin filaments depolymerize inside cells. I briefly describe how the combination of imaging actin filament dynamics in cells and using in vitro biochemistry progressively altered our views of actin depolymerization. I describe why I do not think that the prevailing model of actin filament turnover—cofilin-mediated actin filament severing—can account for actin filament disassembly detected in cells. Finally, I speculate that cells might be able to tune the mechanism of actin depolymerization to meet physiological demands and selectively control the stabilities of different actin arrays.

scholarly journals Calmodulin dissociation regulates brush border myosin I (110-kD-calmodulin) mechanochemical activity in vitro.

1990 ◽  
Vol 110 (4) ◽  
pp. 1137-1147 ◽  
Author(s):  
K Collins ◽  
J R Sellers ◽  
P Matsudaira
Keyword(s):  
Actin Filaments ◽  
Actin Binding ◽  
Filament Length ◽  
Myosin I ◽  
High Calcium ◽  
Hydrolysis Of ◽  
Mgatpase Activity ◽  
Low Rate ◽  
Actin Concentration

110-kD-calmodulin, when immobilized on nitrocellulose-coated coverslips, translocates actin filaments at a maximal rate of 0.07-0.1 micron/s at 37 degrees C. Actin activates MgATPase activity greater than 40-fold, with a Km of 40 microM and Vmax of 0.86 s-1 (323 nmol/min/mg). The rate of motility mediated by 110-kD-calmodulin is dependent on temperature and concentration of ATP, but independent of time, actin filament length, amount of enzyme, or ionic strength. Tropomyosin inhibits actin binding by 110-kD-calmodulin in MgATP and inhibits motility. Micromolar calcium slightly increases the rate of motility and increases the actin-activated MgATP hydrolysis of the intact complex. In 0.1 mM or higher calcium, motility ceases and actin-dependent MgATPase activity remains at a low rate not activated by increasing actin concentration. Correlated with these inhibitions of activity, a subset of calmodulin is dissociated from the complex. To determine if calmodulin loss is the cause of calcium inhibition, we assayed the ability of calmodulin to rescue the calcium-inactivated enzyme. Readdition of calmodulin to the nitrocellulose-bound, calcium-inactivated enzyme completely restores motility. Addition of calmodulin also restores actin activation to MgATPase activity in high calcium, but does not affect the activity of the enzyme in EGTA. These results demonstrate that in vitro 110-kD-calmodulin functions as a calcium-sensitive mechanoenzyme, a vertebrate myosin I. The properties of this enzyme suggest that despite unique structure and regulation, myosins I and II share a molecular mechanism of motility.

Villin-induced growth of microvilli is reversibly inhibited by cytochalasin D

1993 ◽  
Vol 105 (3) ◽  
pp. 765-775 ◽  
Author(s):  
E. Friederich ◽  
T.E. Kreis ◽  
D. Louvard
Keyword(s):  
Plasma Membrane ◽  
Actin Cytoskeleton ◽  
Binding Site ◽  
Actin Filaments ◽  
Living Cells ◽  
Cytochalasin D ◽  
Actin Binding ◽  
Fast Growing ◽  
Actin Binding Site

Villin is an actin-binding protein that is associated with the cytoskeleton of brush border microvilli. In vitro, villin nucleates, caps or severs actin filaments in a Ca(2+)-dependent manner. In the absence of Ca2+, villin organizes microfilaments into bundles. Transfection of a villin-specific cDNA into cultured cells that do not produce this protein results in the growth of long surface microvilli and the reorganization of the underlying actin cytoskeleton. Here we studied the effects of low concentrations of cytochalasin D on the induction of these plasma membrane-actin cytoskeleton specializations. Transfected cells were treated with concentrations of cytochalasin D that prevent the association of actin monomers with the fast-growing end of microfilaments in vitro. In villin-positive cells, cytochalasin D inhibited the growth of microvilli and promoted the formation of rodlet-like actin structures, which were randomly distributed throughout the cytoplasm. The formation of these structures was dependent on large amounts of villin and on the integrity of an actin-binding site located at the carboxy terminus of villin, which is required for microfilament bundling in vitro and for the growth of microvilli in vivo. The effect of cytochalasin D was reversible. The observation of living cells by video-imaging revealed that when cytochalasin D was removed, rapid disassembly of actin rodlets occurred after a lag phase. The present data stress the important role of the plasma membrane in the organization of the actin cytoskeleton and suggest that the extension of the microvillar plasma membrane is dependent on the elongation of microfilaments at their fast-growing end. Inhibition of microfilament elongation near the plasma membrane by cytochalasin D may result in the ‘random’ nucleation of actin filaments throughout the cytoplasm. On the basis of the present data, we propose that villin is involved in the assembly of the microvillar actin bundle by a mechanism that does not prevent monomer association with the preferred end of microfilaments. For instance, villin may stabilize actin filaments by lateral interactions. The functional importance of the carboxy-terminal F-actin binding site in such a mechanism is stressed by the fact that it is required for the formation of F-actin rodlets in cytochalasin D-treated cells. Finally, our data further emphasize the observations that the effects of cytochalasin D in living cells can be modulated by actin-binding proteins.

scholarly journals Espin cross-links cause the elongation of microvillus-type parallel actin bundles in vivo

2003 ◽  
Vol 163 (5) ◽  
pp. 1045-1055 ◽  
Author(s):  
Patricia A. Loomis ◽  
Lili Zheng ◽  
Gabriella Sekerková ◽  
Benjarat Changyaleket ◽  
Enrico Mugnaini ◽  
...  
Keyword(s):  
Hair Cells ◽  
Actin Polymerization ◽  
Cytochalasin D ◽  
Actin Monomer ◽  
Actin Bundles ◽  
Rich Domain ◽  
Cross Links ◽  
Necessary And Sufficient

The espin actin-bundling proteins, which are the target of the jerker deafness mutation, caused a dramatic, concentration-dependent lengthening of LLC-PK1-CL4 cell microvilli and their parallel actin bundles. Espin level was also positively correlated with stereocilium length in hair cells. Villin, but not fascin or fimbrin, also produced noticeable lengthening. The espin COOH-terminal peptide, which contains the actin-bundling module, was necessary and sufficient for lengthening. Lengthening was blocked by 100 nM cytochalasin D. Espin cross-links slowed actin depolymerization in vitro less than twofold. Elimination of an actin monomer-binding WASP homology 2 domain and a profilin-binding proline-rich domain from espin did not decrease lengthening, but made it possible to demonstrate that actin incorporation was restricted to the microvillar tip and that bundles continued to undergo actin treadmilling at ∼1.5 s−1 during and after lengthening. Thus, through relatively subtle effects on actin polymerization/depolymerization reactions in a treadmilling parallel actin bundle, espin cross-links cause pronounced barbed-end elongation and, thereby, make a longer bundle without joining shorter modules.

Pushing with actin: from cells to pathogens

2015 ◽  
Vol 43 (1) ◽  
pp. 84-91 ◽  
Author(s):  
J. Victor Small
Keyword(s):  
Actin Filaments ◽  
Actin Polymerization ◽  
Electron Tomography ◽  
Function Analysis ◽  
Host Cells ◽  
Actin Networks ◽  
Resolution Model ◽  
Image Averaging ◽  
Actin Comet Tails

Actin polymerization is harnessed by cells to generate lamellipodia for movement and by a subclass of pathogens to facilitate invasion of their infected hosts. Using electron tomography (ET), we have shown that lamellipodia are formed via the generation of subsets of actin filaments joined by branch junctions. Image averaging produced a 2.9 nm resolution model of branch junctions in situ and revealed a close fit to the electron density map of the actin-related protein 2/3 (Arp2/3)–actin complex in vitro. Correlated live-cell imaging and ET was also used to determine how actin networks are created and remodelled during the initiation and inhibition of protrusion in lamellipodia. Listeria, Rickettsia and viruses, such as vaccinia virus and baculovirus, exploit the actin machinery of host cells to generate propulsive actin comet tails to disseminate their infection. By applying ET, we have shown that baculovirus generates at its rear a fishbone-like array of subsets of branched actin filaments, with an average of only four filaments engaged in pushing at any one time. In both of these studies, the application of ET of negatively stained cytoskeletons for higher filament resolution and cryo-ET for preserving overall 3D morphology was crucial for obtaining a complete structure–function analysis of actin-driven propulsion.

Sign in / Sign up

Export Citation Format

Share Document