scholarly journals Crystal structure of the catalytic core domain of the family 6 cellobiohydrolase II, Cel6A, from Humicola insolens, at 1.92 Å resolution

1999 ◽  
Vol 337 (2) ◽  
pp. 297-304 ◽  
Author(s):  
Annabelle VARROT ◽  
Sven HASTRUP ◽  
Martin SCHÜLEIN ◽  
Gideon J. DAVIES
Keyword(s):  
Active Site ◽  
Three Dimensional ◽  
Structural Similarity ◽  
Data Bank ◽  
Dimensional Structure ◽  
Active Site Residues ◽  
Catalytic Core ◽  
Humicola Insolens ◽  
The Family ◽  
Cellobiohydrolase Ii

The three-dimensional structure of the catalytic core of the family 6 cellobiohydrolase II, Cel6A (CBH II), from Humicola insolens has been determined by X-ray crystallography at a resolution of 1.92 Å. The structure was solved by molecular replacement using the homologous Trichoderma reesei CBH II as a search model. The H. insolens enzyme displays a high degree of structural similarity with its T. reeseiequivalent. The structure features both O- (α-linked mannose) and N-linked glycosylation and a hexa-co-ordinate Mg2+ ion. The active-site residues are located within the enclosed tunnel that is typical for cellobiohydrolase enzymes and which may permit a processive hydrolysis of the cellulose substrate. The close structural similarity between the two enzymes implies that kinetics and chain-end specificity experiments performed on the H. insolens enzyme are likely to be applicable to the homologous T. reesei enzyme. These cast doubt on the description of cellobiohydrolases as exo-enzymes since they demonstrated that Cel6A (CBH II) shows no requirement for non-reducing chain-ends, as had been presumed. There is no crystallographic evidence in the present structure to support a mechanism involving loop opening, yet preliminary modelling experiments suggest that the active-site tunnel of Cel6A (CBH II) is too narrow to permit entry of a fluorescenyl-derivatized substrate, known to be a viable substrate for this enzyme. Co-ordinates for the structure described in this paper have been deposited with the Brookhaven Protein Data Bank with accession code 1BVW.PDB.

scholarly journals Structure and function of Humicola insolens family 6 cellulases: structure of the endoglucanase, Cel6B, at 1.6 Å resolution

2000 ◽  
Vol 348 (1) ◽  
pp. 201-207 ◽  
Author(s):  
Gideon J. DAVIES ◽  
A. Marek BRZOZOWSKI ◽  
Miroslawa DAUTER ◽  
Annabelle VARROT ◽  
Martin SCHÜLEIN
Keyword(s):  
Active Site ◽  
Sequence Similarity ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Crystalline Cellulose ◽  
Glycoside Hydrolase Family ◽  
Catalytic Core ◽  
Humicola Insolens ◽  
Cellobiohydrolase Ii ◽  
And Function

Cellulases are traditionally classified as either endoglucanases or cellobiohydrolases on the basis of their respective catalytic activities on crystalline cellulose, which is generally hydrolysed more efficiently only by the cellobiohydrolases. On the basis of the Trichoderma reesei cellobiohydrolase II structure, it was proposed that the active-site tunnel of cellobiohydrolases permitted the processive hydrolysis of cellulose, whereas the corresponding endoglucanases would display open active-site clefts [Rouvinen, Bergfors, Teeri, Knowles and Jones (1990) Science 249, 380-386]. Glycoside hydrolase family 6 contains both cellobiohydrolases and endoglucanases. The structure of the catalytic core of the family 6 endoglucanase Cel6B from Humicola insolens has been solved by molecular replacement with the known T. reesei cellobiohydrolase II as the search model. Strangely, at the sequence level, this enzyme exhibits the highest sequence similarity to family 6 cellobiohydrolases and displays just one of the loop deletions traditionally associated with endoglucanases in this family. However, this enzyme shows no activity on crystalline substrates but a high activity on soluble substrates, which is typical of an endoglucanase. The three-dimensional structure reveals that the deletion of just a single loop of the active site, coupled with the resultant conformational change in a second ‘cellobiohydrolase-specific’ loop, peels open the active-site tunnel to reveal a substrate-binding groove.

A murrel cysteine protease, cathepsin L: bioinformatics characterization, gene expression and proteolytic activity

Biologia ◽  
2014 ◽  
Vol 69 (3) ◽  
Author(s):  
Venkatesh Kumaresan ◽  
Prasanth Bhatt ◽  
Rajesh Palanisamy ◽  
Annie Gnanam ◽  
Mukesh Pasupuleti ◽  
...  
Keyword(s):  
Gene Expression ◽  
Bacterial Infections ◽  
Cathepsin L ◽  
Three Dimensional ◽  
Structural Similarity ◽  
Data Bank ◽  
Minimum Free Energy ◽  
Dimensional Structure ◽  
Peptide Bonds ◽  
Gene Expression Studies

AbstractCathepsin L, a lysosomal endopeptidase, is a member of the peptidase C1 family (papain-like family) of cysteine proteinases that cleave peptide bonds of lysosomal proteins. In this study, we report a cathepsin L sequence identified from the constructed cDNA library of striped murrel Channa striatus (designated as CsCath L) using genome sequencing FLXTM technology. The full-length CsCath L contains three eukaryotic thiol protease domains at positions 134-145, 278-288 and 299-318. Phylogenetic analysis revealed that the CsCath L was clustered together with other cathepsin L from teleosts. The three-dimensional structure of CsCath L modelled by the I-Tasser program was compared with structures deposited in the Protein Data Bank to find out the structural similarity of CsCath L with experimentally identified structures. The results showed that the CsCath L exhibits maximum structural identity with pro-cathepsin L from human. The RNA fold structure of CsCath L was predicted along with its minimum free energy (−471.93 kcal/mol). The highest CsCath L gene expression was observed in liver, which was also significantly higher (P < 0.05) than that detected in other tissues taken for analysis. In order to investigate the mRNA transcription profile of CsCath L during infection, C. striatus were injected with fungus (Aphanomyces invadans) and bacteria (Aeromonas hydrophila) and its expression was up-regulated in liver at various time points. Similar to gene expression studies, the highest CsCath L enzyme activity was also observed in liver and its activity was up-regulated by fungal and bacterial infections.

scholarly journals Structure and Functional Analysis of a Ribosomal Oxygenase

2014 ◽  
Vol 70 (a1) ◽  
pp. C1408-C1408
Author(s):  
Laura van Staalduinen ◽  
Stefanie Novakowski ◽  
Zongchao Jia
Keyword(s):  
Ribosomal Protein ◽  
Active Site ◽  
Three Dimensional ◽  
Large Family ◽  
Structural Similarity ◽  
Dimensional Structure ◽  
Titration Calorimetry ◽  
Ribosome Assembly ◽  
Oxidation Reactions ◽  
Jmjc Domain

The 2-oxoglutarate/Fe(II)-dependent oxygenases (2OG oxygenases) are a large family of proteins that share a similar overall three-dimensional structure and catalyze a diverse array of oxidation reactions. The Jumonji C (JmjC)-domain containing proteins represent an important subclass of the 2OG oxygenase family that typically catalyze protein hydroxylation; however, recently other reactions have been identified, such as tRNA modification. The E. coli gene, ycfD, was predicted to be a JmjC-domain containing protein of unknown function based on primary sequence. Recently YcfD was determined to act as a ribosomal oxygenase, hydroxylating an arginine residue on the 50S ribosomal protein L-16 (RL-16). We have determined the crystal structure of YcfD at 2.7 Å resolution, revealing that YcfD is structurally similar to known JmjC proteins and possesses the characteristic double stranded β-helix fold or cupin domain. Separate from the cupin domain, an additional globular module termed -helical arm mediates dimerization of YcfD. We further have shown that 2-oxoglutarate binds to YcfD using isothermal titration calorimetry and identified R140 and S116 as key 2OG binding residues using mutagenesis which, together with the iron location and structural similarity with other cupin family members, allowed identification of the active site. Structural homology to ribosomal assembly proteins combined with GST-YcfD pull-down of a ribosomal protein and docking of RL-16 to the YcfD active site support the role of YcfD in regulation of bacterial ribosome assembly. Furthermore, overexpression of YcfD is shown to inhibit cell growth signifying a toxic effect on ribosome assembly.

scholarly journals X-Ray Crystallographic and Mutational Studies of Fluoroacetate Dehalogenase from Burkholderia sp. Strain FA1

2009 ◽  
Vol 191 (8) ◽  
pp. 2630-2637 ◽  
Author(s):  
Keiji Jitsumori ◽  
Rie Omi ◽  
Tatsuo Kurihara ◽  
Atsushi Kurata ◽  
Hisaaki Mihara ◽  
...  
Keyword(s):  
Active Site ◽  
Three Dimensional ◽  
Chloride Ion ◽  
Catalytic Triad ◽  
Dimensional Structure ◽  
Active Site Residues ◽  
Density Peak ◽  
Core Domain ◽  
X Ray ◽  
The Core

ABSTRACT Fluoroacetate dehalogenase catalyzes the hydrolytic defluorination of fluoroacetate to produce glycolate. The enzyme is unique in that it catalyzes the cleavage of a carbon-fluorine bond of an aliphatic compound: the bond energy of the carbon-fluorine bond is among the highest found in natural products. The enzyme also acts on chloroacetate, although much less efficiently. We here determined the X-ray crystal structure of the enzyme from Burkholderia sp. strain FA1 as the first experimentally determined three-dimensional structure of fluoroacetate dehalogenase. The enzyme belongs to the α/β hydrolase superfamily and exists as a homodimer. Each subunit consists of core and cap domains. The catalytic triad, Asp104-His271-Asp128, of which Asp104 serves as the catalytic nucleophile, was found in the core domain at the domain interface. The active site was composed of Phe34, Asp104, Arg105, Arg108, Asp128, His271, and Phe272 of the core domain and Tyr147, His149, Trp150, and Tyr212 of the cap domain. An electron density peak corresponding to a chloride ion was found in the vicinity of the Nε1 atom of Trp150 and the Nε2 atom of His149, suggesting that these are the halide ion acceptors. Site-directed replacement of each of the active-site residues, except for Trp150, by Ala caused the total loss of the activity toward fluoroacetate and chloroacetate, whereas the replacement of Trp150 caused the loss of the activity only toward fluoroacetate. An interaction between Trp150 and the fluorine atom is probably an absolute requirement for the reduction of the activation energy for the cleavage of the carbon-fluorine bond.

scholarly journals Structure and Mechanism of Ferulic Acid Decarboxylase (FDC1) from Saccharomyces cerevisiae

2015 ◽  
Vol 81 (12) ◽  
pp. 4216-4223 ◽  
Author(s):  
Mohammad Wadud Bhuiya ◽  
Soon Goo Lee ◽  
Joseph M. Jez ◽  
Oliver Yu
Keyword(s):  
Crystal Structure ◽  
Saccharomyces Cerevisiae ◽  
Ferulic Acid ◽  
Active Site ◽  
Three Dimensional ◽  
Structural Similarity ◽  
Dimensional Structure ◽  
Acid Decarboxylase ◽  
Content Type ◽  
Ferulic Acid Decarboxylase

ABSTRACTThe nonoxidative decarboxylation of aromatic acids occurs in a range of microbes and is of interest for bioprocessing and metabolic engineering. Although phenolic acid decarboxylases provide useful tools for bioindustrial applications, the molecular bases for how these enzymes function are only beginning to be examined. Here we present the 2.35-Å-resolution X-ray crystal structure of the ferulic acid decarboxylase (FDC1; UbiD) fromSaccharomyces cerevisiae. FDC1 shares structural similarity with the UbiD family of enzymes that are involved in ubiquinone biosynthesis. The position of 4-vinylphenol, the product ofp-coumaric acid decarboxylation, in the structure identifies a large hydrophobic cavity as the active site. Differences in the β2e-α5 loop of chains in the crystal structure suggest that the conformational flexibility of this loop allows access to the active site. The structure also implicates Glu285 as the general base in the nonoxidative decarboxylation reaction catalyzed by FDC1. Biochemical analysis showed a loss of enzymatic activity in the E285A mutant. Modeling of 3-methoxy-4-hydroxy-5-decaprenylbenzoate, a partial structure of the physiological UbiD substrate, in the binding site suggests that an ∼30-Å-long pocket adjacent to the catalytic site may accommodate the isoprenoid tail of the substrate needed for ubiquinone biosynthesis in yeast. The three-dimensional structure of yeast FDC1 provides a template for guiding protein engineering studies aimed at optimizing the efficiency of aromatic acid decarboxylation reactions in bioindustrial applications.

scholarly journals Structure of the S.coelicolor A3(2) N-acetylhexosaminidase provides insight into GH20 catalysis

2014 ◽  
Vol 70 (a1) ◽  
pp. C1677-C1677
Author(s):  
Nhung Thi Nguyen ◽  
Nicolas Doucet
Keyword(s):  
Active Site ◽  
Streptomyces Coelicolor ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Active Site Residues ◽  
Structural Variations ◽  
Neighboring Group ◽  
Glycosidic Bonds ◽  
Ligand Free ◽  
Neighboring Group Participation

β-N-acetylhexosaminidases (HEX - EC 3.2.1.52) are glycosidases that catalyze the glycosidic linkage hydrolysis of gluco- and galacto-configurations of N-acetyl-β-D-hexosaminides. These enzymes have shown considerable interest due to their importance in human physiology and their potential use for the enzymatic synthesis of carbohydrates and glycomymetics. HEX can cleave the β-1,4-glycosidic bonds of polymers with long saccharide chains, and utilize a double-displacement retaining mechanism with neighboring group participation to yield an oxazolinium intermediate. In this study, the three-dimensional structure of the wild-type and catalytically impaired E302Q HEX variant from the soil bacterium Streptomyces coelicolor A3(2) (ScHEX-family GH20) were solved in ligand-free forms and in the presence of 6-acetamido-6-deoxy-castanospermine (6-Ac-Cas). The E302Q variant was also trapped as an intermediate with oxazoline bound to the active center. The complexed structures reveal an active pocket with multiple subsites packed with four Trp, providing a hydrophobic environment that forms a small active-site architecture suitable for holding polysaccharide chains and protecting the formed oxazolinium intermediate during catalysis. Crystallographic evidence highlights structural variations in the loop 3 environment, suggesting conformational heterogeneity for important active-site residues of this GH20 family member.

scholarly journals A computer-based approach for developing linamarase inhibitory agents

2020 ◽  
Vol 5 (7) ◽  
Author(s):  
Lucas Paul ◽  
Celestin N. Mudogo ◽  
Kelvin M. Mtei ◽  
Revocatus L. Machunda ◽  
Fidele Ntie-Kang
Keyword(s):  
Structure Elucidation ◽  
Three Dimensional ◽  
Data Bank ◽  
Competitive Inhibitor ◽  
Industrial Applications ◽  
Dimensional Structure ◽  
Full Understanding ◽  
The Poor ◽  
Computer Based ◽  
Inhibitory Agents

AbstractCassava is a strategic crop, especially for developing countries. However, the presence of cyanogenic compounds in cassava products limits the proper nutrients utilization. Due to the poor availability of structure discovery and elucidation in the Protein Data Bank is limiting the full understanding of the enzyme, how to inhibit it and applications in different fields. There is a need to solve the three-dimensional structure (3-D) of linamarase from cassava. The structural elucidation will allow the development of a competitive inhibitor and various industrial applications of the enzyme. The goal of this review is to summarize and present the available 3-D modeling structure of linamarase enzyme using different computational strategies. This approach could help in determining the structure of linamarase and later guide the structure elucidation in silico and experimentally.

Sign in / Sign up

Export Citation Format

Share Document