scholarly journals Calponin induces actin polymerization at low ionic strength and inhibits depolymerization of actin filaments

1995 ◽  
Vol 312 (2) ◽  
pp. 587-592 ◽  
Author(s):  
T Kake ◽  
S Kimura ◽  
K Takahashi ◽  
K Maruyama
Keyword(s):  
Actin Filaments ◽  
Actin Polymerization ◽  
Average Length ◽  
Length Distribution ◽  
Inhibitory Effect ◽  
Molar Ratio ◽  
Equimolar Ratio ◽  
Rapid Elongation ◽  
Low Ionic Strength ◽  
Poisson Type

Calponin from chicken gizzard induced polymerization of actin in the presence of 10 mM KCl. Only 2 min after the addition of KCl in the presence of a 0.0625-0.25:1 molar ratio of calponin to actin, a Poisson-type length distribution (with an average length of approx. 0.7 micron) was observed with formed actin filaments. This result suggests that calponin-actin complexes served as nuclei for rapid elongation. Calponin caused a rapid polymerization of actin even in G-buffer (2 mM Tris/HCl, pH 8.0) which is usually used for depolymerization of actin filaments. Binding of calponin at a level of up to 1.25 mol per mol of actin was observed in the actin filaments formed in the presence of calponin at very low ionic strengths. When actin filaments were exposed to 3.3 mM KCl, by dilution with G-buffer, a rapid depolymerization occurred. Addition of calponin greatly retarded the depolymerization process and, in the presence of an equimolar ratio of calponin to actin, depolymerization hardly occurred. In the presence of calmodulin, this inhibitory effect on depolymerization was reversed by Ca2+, releasing calponin from actin filaments.

scholarly journals Actin-binding protein promotes the bipolar and perpendicular branching of actin filaments.

1980 ◽  
Vol 87 (3) ◽  
pp. 841-848 ◽  
Author(s):  
J H Hartwig ◽  
J Tyler ◽  
T P Stossel
Keyword(s):  
Actin Filaments ◽  
Actin Polymerization ◽  
Average Length ◽  
Binding Protein ◽  
Actin Binding ◽  
Branch Points ◽  
Heavy Meromyosin ◽  
Actin Binding Protein ◽  
Protein Dimers ◽  
Protein Molecules

Branching filaments with striking perpendicularity form when actin polymerizes in the presence of macrophage actin-binding protein. Actin-binding protein molecules are visible at the branch points. Compared with actin polymerized in the absence of actin-binding proteins, not only do the filaments branch but the average length of the actin filaments decreases from 3.2 to 0.63 micrometer. Arrowhead complexes formed by addition of heavy meromyosin molecules to the branching actin filaments point toward the branch points. Actin-binding protein also accelerates the onset of actin polymerization. All of these findings show that actin filaments assemble from nucleating sites on actin-binding protein dimers. A branching polymerization of actin filaments from a preexisting lattice of actin filaments joined by actin-binding protein molecules could generate expansion of cortical cytoplasm in amoeboid cells.

scholarly journals Interactions of tensin with actin and identification of its three distinct actin-binding domains.

1994 ◽  
Vol 125 (5) ◽  
pp. 1067-1075 ◽  
Author(s):  
S H Lo ◽  
P A Janmey ◽  
J H Hartwig ◽  
L B Chen
Keyword(s):  
Amino Acids ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Sh2 Domain ◽  
Actin Binding ◽  
Molar Ratio ◽  
Actin Assembly ◽  
Binding Domains ◽  
Focal Contacts ◽  
End Capping

Tensin, a 200-kD phosphoprotein of focal contacts, contains sequence homologies to Src (SH2 domain), and several actin-binding proteins. These features suggest that tensin may link the cell membrane to the cytoskeleton and respond directly to tyrosine kinase signalling pathways. Here we identify three distinct actin-binding domains within tensin. Recombinant tensin purified after overexpression by a baculovirus system binds to actin filaments with Kd = 0.1 microM, cross-links actin filaments at a molar ratio of 1:10 (tensin/actin), and retards actin assembly by barbed end capping with Kd = 20 nM. Tensin fragments were constructed and expressed as fusion proteins to map domains having these activities. Three regions from tensin interact with actin: two regions composed of amino acids 1 to 263 and 263 to 463, cosediment with F-actin but do not alter the kinetics of actin assembly; a region composed of amino acids 888-989, with sequence homology to insertin, retards actin polymerization. A claw-shaped tensin dimer would have six potential actin-binding sites and could embrace the ends of two actin filaments at focal contacts.

scholarly journals Kinetic analysis of F-actin depolymerization in polymorphonuclear leukocyte lysates indicates that chemoattractant stimulation increases actin filament number without altering the filament length distribution.

1991 ◽  
Vol 115 (3) ◽  
pp. 677-687 ◽  
Author(s):  
M L Cano ◽  
D A Lauffenburger ◽  
S H Zigmond
Keyword(s):  
Actin Filaments ◽  
Time Course ◽  
Average Length ◽  
Length Distribution ◽  
Fold Increase ◽  
Dissociation Rate ◽  
Actin Binding ◽  
Filamentous Actin ◽  
Actin Depolymerization ◽  
Time Courses

The rate of filamentous actin (F-actin) depolymerization is proportional to the number of filaments depolarizing and changes in the rate are proportional to changes in filament number. To determine the number and length of actin filaments in polymorphonuclear leukocytes and the change in filament number and length that occurs during the increase in F-actin upon chemoattractant stimulation, the time course of cellular F-actin depolymerization in lysates of control and peptide-stimulated cells was examined. F-actin was quantified by the TRITC-labeled phalloidin staining of pelletable actin. Lysis in 1.2 M KCl and 10 microM DNase I minimized the effects of F-actin binding proteins and G-actin, respectively, on the kinetics of depolymerization. To determine filament number and length from a depolymerization time course, depolymerization kinetics must be limited by the actin monomer dissociation rate. Comparison of time courses of depolymerization in the presence (pointed ends free) or absence (barbed and pointed ends free) of cytochalasin suggested depolymerization occurred from both ends of the filament and that monomer dissociation was rate limiting. Control cells had 1.7 +/- 0.4 x 10(5) filaments with an average length of 0.29 +/- 0.09 microns. Chemo-attractant stimulation for 90 s at room temperature with 0.02 microM N-formylnorleucylleucylphenylalanine caused a twofold increase in F-actin and about a two-fold increase in the total number of actin filaments to 4.0 +/- 0.5 x 10(5) filaments with an average length of 0.27 +/- 0.07 microns. In both cases, most (approximately 80%) of the filaments were quite short (less than or equal to 0.18 micron). The length distributions of actin filaments in stimulated and control cells were similar.

scholarly journals Modulation of gelsolin-induced actin-filament severing by caldesmon and tropomyosin and the effect of these proteins on the actin activation of myosin Mg2+-ATPase activity

1996 ◽  
Vol 315 (3) ◽  
pp. 753-759 ◽  
Author(s):  
R Dąbrowska ◽  
H Hinssen ◽  
B Gałązkiewicz ◽  
E Nowak
Keyword(s):  
Atpase Activity ◽  
Actin Filaments ◽  
Smooth Muscle Actin ◽  
Direct Analysis ◽  
Inhibitory Effect ◽  
Microscopic Investigation ◽  
Electron Microscopic Investigation ◽  
Actin Binding ◽  
Molar Ratio ◽  
Electron Microscopic

We have investigated the cumulative effects of three smooth-muscle actin-binding proteins, gelsolin, caldesmon and tropomyosin, on actin activation of myosin Mg2+-ATPase activity under low-ionic-strength conditions. A combination of tropomyosin (at a stoicheiometric ratio to actin) and gelsolin (at a molar ratio to actin of up to 1:100) showed essentially additive stimulatory effects that were counteracted by caldesmon. Suppression of the gelsolin-induced activation of the ATPase by caldesmon was higher in the presence of tropomyosin although it was not complete even at stoicheiometric amounts of both proteins to actin. Since activation of actin-activated ATPase activity of myosin by gelsolin is related to its severing action, it is concluded that caldesmon and tropomyosin cannot fully protect actin filaments against the severing activity of gelsolin. Direct analysis of the actin-severing activity of gelsolin by a fluorimetric assay using pyrene-labelled actin confirmed this conclusion. Tropomyosin and caldesmon in saturating amounts relative to actin inhibited the activity of gelsolin by between 21 and 40% and 25 and 48% respectively, depending on the molar ratio of gelsolin to actin. The inhibitory effect was increased with a combination of both (up to 67%) although it was evident that even under these conditions the actin filaments were not fully protected from being severed by gelsolin. These findings were corroborated by electron-microscopic investigation of actin filaments with or without tropomyosin and caldesmon after the addition of gelsolin.

scholarly journals Ultrastructure of the intact skeleton of the human erythrocyte membrane.

1986 ◽  
Vol 102 (3) ◽  
pp. 997-1006 ◽  
Author(s):  
B W Shen ◽  
R Josephs ◽  
T L Steck
Keyword(s):  
Human Erythrocyte ◽  
Actin Filaments ◽  
Band 3 ◽  
Carbon Films ◽  
Erythrocyte Membranes ◽  
Accessory Proteins ◽  
Red Cell Membrane ◽  
Human Erythrocyte Membranes ◽  
Low Ionic Strength ◽  
Triton X

Filamentous skeletons were liberated from isolated human erythrocyte membranes in Triton X-100, spread on fenestrated carbon films, negatively stained, and viewed intact and unfixed in the transmission electron microscope. Two forms of the skeleton were examined: (a) basic skeletons, stripped of accessory proteins with 1.5 M NaCl so that they contain predominantly polypeptide bands 1, 2, 4.1, and 5; and (b) unstripped skeletons, which also bore accessory proteins such as ankyrin and band 3 and small plaques of residual lipid. Freshly prepared skeletons were highly condensed. Incubation at low ionic strength and in the presence of dithiothreitol for an hour or more caused an expansion of the skeletons, which greatly increased the visibility of their elements. The expansion may reflect the opening of spectrin from a compact to an elongated disposition. Expanded skeletons appeared to be organized as networks of short actin filaments joined by multiple (5-8) spectrin tetramers. In unstripped preparations, globular masses were observed near the centers of the spectrin filaments, probably corresponding to complexes of ankyrin with band 3 oligomers. Some of these globules linked pairs of spectrin filaments. Skeletons prepared with a minimum of perturbation had thickened actin protofilaments, presumably reflecting the presence of accessory proteins. The length of these actin filaments was highly uniform, averaging 33 +/- 5 nm. This is the length of nonmuscle tropomyosin. Since there is almost enough tropomyosin present to saturate the F-actin, our data support the hypothesis that tropomyosin may determine the length of actin protofilaments in the red cell membrane.

Fibrinogen binding to the integrin αIIbβ3 modulates store-mediated calcium entry in human platelets

Blood ◽  
2001 ◽  
Vol 97 (9) ◽  
pp. 2648-2656 ◽  
Author(s):  
Juan A. Rosado ◽  
Else M. Y. Meijer ◽  
Karly Hamulyak ◽  
Irena Novakova ◽  
Johan W. M. Heemskerk ◽  
...  
Keyword(s):  
Actin Cytoskeleton ◽  
Actin Polymerization ◽  
Adenosine Diphosphate ◽  
Inhibitory Effect ◽  
Human Platelets ◽  
Dependent Manner ◽  
Concentration Dependent Manner ◽  
Integrin Αiibβ3 ◽  
Fibrinogen Binding

Abstract Effects of the occupation of integrin αIIbβ3 by fibrinogen on Ca++signaling in fura-2–loaded human platelets were investigated. Adding fibrinogen to washed platelet suspensions inhibited increases in cytosolic [Ca++] concentrations ([Ca++]i) evoked by adenosine diphosphate (ADP) and thrombin in a concentration-dependent manner in the presence of external Ca++ but not in the absence of external Ca++ or in the presence of the nonselective cation channel blocker SKF96365, indicating selective inhibition of Ca++entry. Fibrinogen also inhibited store-mediated Ca++ entry (SMCE) activated after Ca++ store depletion using thapsigargin. The inhibitory effect of fibrinogen was reversed if fibrinogen binding to αIIbβ3 was blocked using RDGS or abciximab and was absent in platelets from patients homozygous for Glanzmann thrombasthenia. Fibrinogen was without effect on SMCE once activated. Activation of SMCE in platelets occurs through conformational coupling between the intracellular stores and the plasma membrane and requires remodeling of the actin cytoskeleton. Fibrinogen inhibited actin polymerization evoked by ADP or thapsigargin in control cells and in cells loaded with the Ca++ chelator dimethyl BAPTA. It also inhibited the translocation of the tyrosine kinase p60src to the cytoskeleton. These results indicate that the binding of fibrinogen to integrin αIIbβ3 inhibits the activation of SMCE in platelets by a mechanism that may involve modulation of the reorganization of the actin cytoskeleton and the cytoskeletal association of p60src. This action may be important in intrinsic negative feedback to prevent the further activation of platelets subjected to low-level stimuli in vivo.

scholarly journals Tropomyosin inhibits ADF/cofilin-dependent actin filament dynamics

2002 ◽  
Vol 156 (6) ◽  
pp. 1065-1076 ◽  
Author(s):  
Shoichiro Ono ◽  
Kanako Ono
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Biological Properties ◽  
Actin Dynamics ◽  
Background Suppression ◽  
Thin Filaments ◽  
Actin Organization ◽  
C Elegans ◽  
Filament Dynamics

Tropomyosin binds to actin filaments and is implicated in stabilization of actin cytoskeleton. We examined biochemical and cell biological properties of Caenorhabditis elegans tropomyosin (CeTM) and obtained evidence that CeTM is antagonistic to ADF/cofilin-dependent actin filament dynamics. We purified CeTM, actin, and UNC-60B (a muscle-specific ADF/cofilin isoform), all of which are derived from C. elegans, and showed that CeTM and UNC-60B bound to F-actin in a mutually exclusive manner. CeTM inhibited UNC-60B–induced actin depolymerization and enhancement of actin polymerization. Within isolated native thin filaments, actin and CeTM were detected as major components, whereas UNC-60B was present at a trace amount. Purified UNC-60B was unable to interact with the native thin filaments unless CeTM and other associated proteins were removed by high-salt extraction. Purified CeTM was sufficient to restore the resistance of the salt-extracted filaments from UNC-60B. In muscle cells, CeTM and UNC-60B were localized in different patterns. Suppression of CeTM by RNA interference resulted in disorganized actin filaments and paralyzed worms in wild-type background. However, in an ADF/cofilin mutant background, suppression of CeTM did not worsen actin organization and worm motility. These results suggest that tropomyosin is a physiological inhibitor of ADF/cofilin-dependent actin dynamics.

scholarly journals Sequence and domain organization of scruin, an actin-cross-linking protein in the acrosomal process of Limulus sperm.

1995 ◽  
Vol 128 (1) ◽  
pp. 51-60 ◽  
Author(s):  
M Way ◽  
M Sanders ◽  
C Garcia ◽  
J Sakai ◽  
P Matsudaira
Keyword(s):  
Amino Acid ◽  
Actin Filaments ◽  
Limited Proteolysis ◽  
Open Reading Frames ◽  
Actin Binding ◽  
Molar Ratio ◽  
Domain Organization ◽  
Ring Canals ◽  
Drosophila Protein ◽  
Reading Frames

The acrosomal process of Limulus sperm is an 80-microns long finger of membrane supported by a crystalline bundle of actin filaments. The filaments in this bundle are crosslinked by a 102-kD protein, scruin present in a 1:1 molar ratio with actin. Recent image reconstruction of scruin decorated actin filaments at 13-A resolution shows that scruin is organized into two equally sized domains bound to separate actin subunits in the same filament. We have cloned and sequenced the gene for scruin from a Limulus testes cDNA library. The deduced amino acid sequence of scruin reflects the domain organization of scruin: it consists of a tandem pair of homologous domains joined by a linker region. The domain organization of scruin is confirmed by limited proteolysis of the purified acrosomal process. Three different proteases cleave the native protein in a 5-kD Protease-sensitive region in the middle of the molecule to generate an NH2-terminal 47-kD and a COOH-terminal 56-kD protease-resistant domains. Although the protein sequence of scruin has no homology to any known actin-binding protein, it has similarities to several proteins, including four open reading frames of unknown function in poxviruses, as well as kelch, a Drosophila protein localized to actin-rich ring canals. All proteins that show homologies to scruin are characterized by the presence of an approximately 50-amino acid residue motif that is repeated between two and seven times. Crystallographic studies reveal this motif represents a four beta-stranded fold that is characteristic of the "superbarrel" structural fold found in the sialidase family of proteins. These results suggest that the two domains of scruin seen in EM reconstructions are superbarrel folds, and they present the possibility that other members of this family may also bind actin.

scholarly journals Forces drive basement membrane invasion inCaenorhabditis elegans

2018 ◽  
Vol 115 (45) ◽  
pp. 11537-11542 ◽  
Author(s):  
Rodrigo Cáceres ◽  
Nagagireesh Bojanala ◽  
Laura C. Kelley ◽  
Jes Dreier ◽  
John Manzi ◽  
...  
Keyword(s):  
Caenorhabditis Elegans ◽  
Basement Membrane ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Force Production ◽  
Developmental Event ◽  
C Elegans ◽  
Anchor Cell

During invasion, cells breach basement membrane (BM) barriers with actin-rich protrusions. It remains unclear, however, whether actin polymerization applies pushing forces to help break through BM, or whether actin filaments play a passive role as scaffolding for targeting invasive machinery. Here, using the developmental event of anchor cell (AC) invasion inCaenorhabditis elegans, we observe that the AC deforms the BM and underlying tissue just before invasion, exerting forces in the tens of nanonewtons range. Deformation is driven by actin polymerization nucleated by the Arp2/3 complex and its activators, whereas formins and cross-linkers are dispensable. Delays in invasion upon actin regulator loss are not caused by defects in AC polarity, trafficking, or secretion, as appropriate markers are correctly localized in the AC even when actin is reduced and invasion is disrupted. Overall force production emerges from this study as one of the main tools that invading cells use to promote BM disruption inC. elegans.

Sign in / Sign up

Export Citation Format

Share Document