scholarly journals Phosphatidylinositol synthase and phosphatidylinositol/inositol exchange reactions in turkey erythrocyte membranes

1991 ◽  
Vol 275 (1) ◽  
pp. 187-192 ◽  
Author(s):  
F McPhee ◽  
G Lowe ◽  
C Vaziri ◽  
C P Downes
Keyword(s):  
Exchange Reaction ◽  
Metal Ion ◽  
Divalent Cations ◽  
Erythrocyte Membranes ◽  
Peak Activity ◽  
Membrane Phospholipids ◽  
Exchange Reactions ◽  
Definitive Evidence ◽  
High Concentrations ◽  
Phosphatidylinositol Cycle

Unlike human erythrocytes, those from avian species, such as turkeys and chicks, rapidly incorporate myo-[3H]inositol into membrane phospholipids. The mechanisms regulating [3H]Ins labelling of phosphatidylinositol have been investigated using turkey erythrocyte membranes. In the absence of added nucleotides, [3H]inositol incorporation appears to proceed via phosphatidylinositol/inositol exchange, with a Km for inositol of 0.01 mM. The reaction was dependent upon divalent cations, either Mg2+ or Mn2+, with the latter metal ion being the more effective. [3H]Inositol incorporation was accelerated by CMP, especially when the concentration of Ins was greater than the Km for the exchange reaction. CMP-dependent labelling of PtdIns had a Km for inositol of 0.3 mM and for CMP of 0.015 mM. Divalent cations were also required for this reaction: activity peaked at 0.5 mM-Mn2+ and declined at higher concentrations. At relatively high concentrations, Mg2+ was more effective than Mn2+, with peak activity being achieved above 10 mM. CMP-dependent incorporation of [3H]inositol appears to reflect an exchange reaction catalysed by PtdIns synthase. Definitive evidence for the occurrence of PtdIns synthase in turkey erythrocyte membranes was obtained by demonstrating the formation of [14C]CMP-phosphatidate from [14C]CMP. The radioactivity could be efficiently chased from [14C]CMP-phosphatidate in the presence of unlabelled inositol. The detection of PtdIns synthase activity in morphologically simple turkey erythrocytes should help to clarify the subcellular distribution of this important component of the phosphatidylinositol cycle.

Deposition and dissolution of metal sulfide layers at the Hg electrode surface in seawater electrolyte conditions

2014 ◽  
Vol 11 (2) ◽  
pp. 167 ◽  
Author(s):  
Ivana Milanović ◽  
Damir Krznarić ◽  
Elvira Bura-Nakić ◽  
Irena Ciglenečki
Keyword(s):  
Metal Ions ◽  
Exchange Reaction ◽  
Metal Ion ◽  
Natural Waters ◽  
Metal Sulfide ◽  
Reduction Peak ◽  
Exchange Reactions ◽  
Dissolved Sulfide ◽  
Free Metal ◽  
Sulfide Species

Environmental context The electrochemical detection of many sulfur compounds in natural waters is based on the deposition of a HgS layer at the Hg electrode. In samples containing metal ions in excess of sulfide species, electrochemical exchange reactions between the HgS and the metal ion produce metal-sulfide voltammetric peaks. These peaks can easily be misinterpreted as dissolved sulfide species, and hence do not reflect the bulk state of the solution. Abstract Cyclic voltammetry on a Hg electrode was used to investigate the influence of metal ion (Zn, Cd, Cu, Fe, Pb, Co) on HgS deposition–dissolution in seawater conditions. Due to the exchange of electrons between Hg2+ from a HgS layer and free metal (M2+) from the solution (HgSlayer + M2+ + 2e– ↔ MSlayer + Hg0), the Hg electrode becomes the site for surface metal sulfide (MS) formation. The exchange reaction is reversible, and the surface-formed MS layer reduces at a more negative potential than HgS (MSlayer + 2e– + H+ → M0 + HS). The potentials of both electrode reactions, and the formation and reduction of the MS layer, are determined by the MS solubility product. In solutions containing excess of the free metal ions in comparison to the free sulfide, the exchange reaction produces MS voltammetric peaks, which can be misrepresented for the dissolved sulfide species. This research indirectly confirmed that the FeS electrochemical signal, usually recorded in an iron- and sulfide-rich environment at ~–1.1V v. Ag/AgCl, is not due to FeS reduction. The connection between the studied MS reduction peak potentials and the solubility products shows that the FeS layer formed by an electrochemical exchange reaction with HgS should be reduced at the Hg surface ~100mV more negative than free Fe2+.

Effects of calcium on the kinetics of a model disjunctive ligand exchange reaction: implications for dynamic trace metal ion speciation

2019 ◽  
Vol 21 (1) ◽  
pp. 89-103
Author(s):  
Laura T. Rea ◽  
Yi Xu ◽  
Nathan E. Boland
Keyword(s):  
Trace Metal ◽  
Exchange Reaction ◽  
Ligand Exchange ◽  
Metal Ion ◽  
Multidentate Ligands ◽  
Kinetic Behavior ◽  
Exchange Reactions ◽  
Ligand Exchange Reaction ◽  
Calcium Affinity ◽  
Kinetics Of

Differences in the calcium affinity of exchanging multidentate ligands affect the kinetic behavior of disjunctive ligand exchange reactions.

Efficient Preconcentration of Cu2+, Zn2+ and Fe3+ with an Agarose-Schiff Base Sorbent

2007 ◽  
Vol 72 (7) ◽  
pp. 908-916 ◽  
Author(s):  
Payman Hashemi ◽  
Hatam Hassanvand ◽  
Hossain Naeimi
Keyword(s):  
Schiff Base ◽  
Metal Ions ◽  
Metal Ion ◽  
Good Accuracy ◽  
Kinetic Studies ◽  
Sample Volume ◽  
Effects Of Ph ◽  
Glass Column ◽  
High Concentrations ◽  
Ph Range

Sorption and preconcentration of Cu2+, Zn2+ and Fe3+ on a salen-type Schiff base, 2,2'- [ethane-1,2-diylbis(nitrilomethylidyne)]bis(2-methylphenol), chemically immobilized on a highly crosslinked agarose support, were studied. Kinetic studies showed higher sorption rates of Cu2+ and Fe3+ in comparison with Zn2+. Half-times (t1/2) of 31, 106 and 58 s were obtained for sorption of Cu2+, Zn2+ and Fe3+ by the sorbent, respectively. Effects of pH, eluent concentration and volume, ionic strength, buffer concentration, sample volume and interferences on the recovery of the metal ions were investigated. A 5-ml portion of 0.4 M HCl solution was sufficient for quantitative elution of the metal ions from 0.5 ml of the sorbent packed in a 6.5 mm i.d. glass column. Quantitative recoveries were obtained in a pH range 5.5-6.5 for all the analytes. The volumes to be concentrated exceeding 500 ml, ionic strengths as high as 0.5 mol l-1, and acetate buffer concentrations up to 0.3 mol l-1 for Zn2+ and 0.4 mol l-1 for Cu2+ and Fe3+ did not have any significant effect on the recoveries. The system tolerated relatively high concentrations of diverse ions. Preconcentration factors up to 100 and detection limits of 0.31, 0.16 and 1.73 μg l-1 were obtained for Cu2+, Zn2+ and Fe3+, respectively, for their determination by a flame AAS instrument. The method was successfully applied to the metal ion determinations in several river water samples with good accuracy.

Preparation of Functionalized Diorganomagnesium Reagents in Toluene via Bromine or Iodine/Magnesium-Exchange Reactions

Synthesis ◽  
2021 ◽  
Author(s):  
Alexandre Desaintjean ◽  
Fanny Danton ◽  
Paul Knochel
Keyword(s):  
Exchange Reaction ◽  
Nitro Group ◽  
General Formula ◽  
Functional Groups ◽  
Exchange Reactions ◽  
Acyl Chlorides ◽  
Aryl Iodides ◽  
Highly Sensitive ◽  
Wide Range ◽  
Magnesium Exchange

A wide range of polyfunctionalized di(hetero)aryl- and dialkenyl-magnesium reagents were prepared in toluene within 10 to 120 min between −78 °C and 25 °C via an I/Mg- or Br/Mg-exchange reaction using reagents of the general formula R2Mg (R = sBu, Mes). Highly sensitive functional groups, such as a triazene or a nitro group, were tolerated in these exchange reactions, enabling the synthesis of various functionalized (hetero)arenes and alkenes derivatives after quenching with several electrophiles including allyl bromides, acyl chlorides, aldehydes, ketones, and aryl iodides.

THEORETICAL STUDIES ON THE COUPLING INTERACTIONS AND SELF-EXCHANGE REACTION MECHANISMS IN THE COMPLEXES OF NO WITH ONH AND NOH

2008 ◽  
Vol 07 (03) ◽  
pp. 435-446 ◽  
Author(s):  
PING LI ◽  
XIAOYAN XIE ◽  
YUXIANG BU ◽  
WEIHUA WANG ◽  
NANA WANG ◽  
...  
Keyword(s):  
Electron Transfer ◽  
Exchange Reaction ◽  
Reaction Mechanisms ◽  
Natural Bond Orbital ◽  
Theoretical Studies ◽  
Exchange Reactions ◽  
Electron Transfer Mechanism ◽  
Proton Coupled Electron Transfer ◽  
Planar Geometries ◽  
Transfer Mechanisms

The coupling interactions and self-exchange reaction mechanisms between NO and ONH (NOH) have been systematically investigated at the B3LYP/6-311++G** level of theory. All the equilibrium complexes are characterized by the intermolecular H-bonds and co-planar geometries. The cisoid NOH/ON species is the most stable one among all the complexes considered due to the formation of an N – N bond. Moreover, all the cisoid complexes are found to be more stable than the corresponding transoid ones. The origin of the blueshifts occurring in the selected complexes has been explored, employing the natural bond orbital (NBO) calculations. Additionally, the proton transfer mechanisms for the self-exchange reactions have been proposed, i.e. they can proceed via the three-center proton-coupled electron transfer or five-center cyclic proton-coupled electron transfer mechanism.

scholarly journals Effects of lead chloride on human erythrocyte membranes and on kinetic anion sulphate and glutathione concentrations

2012 ◽  
Vol 17 (4) ◽  
Author(s):  
Tiziana Gugliotta ◽  
Grazia Luca ◽  
Pietro Romano ◽  
Caterina Rigano ◽  
Adriana Scuteri ◽  
...  
Keyword(s):  
Human Erythrocyte ◽  
Redox State ◽  
Subsequent Development ◽  
Lead Chloride ◽  
Erythrocyte Membranes ◽  
Average Lifetime ◽  
Erythrocyte Concentration ◽  
Human Erythrocyte Membranes ◽  
High Concentrations ◽  
Oxidative Effect

AbstractOur study concerns the effects of exposure to lead chloride on the morphology, K+ efflux, SO4 − influx and GSH levels of the human erythrocyte. Blood was collected in heparinized tubes and washed three times. The cells were suspended at 3% hematocrit and incubated for 1 h at 25°C in a medium containing increasing concentrations of lead chloride (0, 0.3, 0.5 and 1 μM). After incubation, the suspensions were centrifuged and the erythrocyte pellets were divided into three aliquots for testing. The results show: an increase in the permeability of erythrocytes treated with lead chloride with consequent damage and cellular death, especially in the presence of high concentrations; an increase in potassium ion efflux; alterations in the morphology and membrane structure of the red blood cells; and a decrease in sulphate uptake, due either to the oxidative effect of this compound on the band 3 protein, which loses its biological valence as a carrier of sulphate ions, or to a decrease in the ATP erythrocyte concentration. In conclusion, the exposure of erythrocytes to Pb2+ ions leads to a reduction in the average lifetime of the erythrocytes and the subsequent development of anemia. These data are discussed in terms of the possible effect of lead on the reduction-oxidation systems of the cell. Oxidant agents, such as lead, are known to cross-link integral membrane proteins, leading to K/Cl-cotransport. The increased K+ efflux affects the altered redox state.

Genetically Engineered Pores as Metal Ion Biosensors

1993 ◽  
Vol 330 ◽  
Author(s):  
John Kasianowicz ◽  
Barbara Walker ◽  
Musti Krishnasastry ◽  
Hagan Bayley
Keyword(s):  
Response Time ◽  
Lipid Bilayers ◽  
Metal Ion ◽  
Dynamic Range ◽  
Divalent Cations ◽  
High Sensitivity ◽  
Genetically Engineered ◽  
Great Promise ◽  
Lipid Bilayer Membranes ◽  
Time Dynamic

ABSTRACTWe are adapting proteins that form pores in lipid bilayers for use as components of biosensors. Specifically, we have produced genetically engineered variants of the α hemolysin (αHL) fromStaphylococcusaureus with properties that are sensitive to low concentrations of divalent cations. For example, the pore-forming activity of one mutant (αHL-H5: residues 130–134 inclusive replaced with histidine) is inhibited by Zn2+at concentrations as low as 1 μM, as judged by the reduction in its ability to lyse rabbit red blood cells and to increase the conductance of planar lipid bilayer membranes. When αHL-H5 is added to the aqueous phase bathing one side of a planar membrane, the subsequent addition of 100 μM Zn2+to either side blocks the pores that form. This result suggests that at least part of the mutated region lines the channel lumen. Ca2+and Mg2+do not block the channel and therefore the H5 mutation confers a degree of analyte specificity to the αHL pore. The results suggest that genetically engineered pores have great promise for the rapid and sensitive detection of metal cations and we discuss the merits and potential limitations for their use in this application. Specifically, we examine the issues of selectivity, sensitivity, response time, dynamic range and longevity. Some of these properties are interdependent. For example, the goals of high sensitivity and rapid response time can be in conflict.

Properties of the mammalian and yeast metal-ion transporters DCT1 and Smf1p expressed in Xenopus laevis oocytes

2001 ◽  
Vol 204 (6) ◽  
pp. 1053-1061 ◽  
Author(s):  
A. Sacher ◽  
A. Cohen ◽  
N. Nelson
Keyword(s):  
Xenopus Laevis ◽  
Metal Ions ◽  
Metal Ion ◽  
Divalent Cations ◽  
Ion Uptake ◽  
Xenopus Laevis Oocytes ◽  
Ion Transporters ◽  
Divalent Metal Ions ◽  
Transport Pathway ◽  
Metal Ion Uptake

Transition metals are essential for many metabolic processes, and their homeostasis is crucial for life. Metal-ion transporters play a major role in maintaining the correct concentrations of the various metal ions in living cells. Little is known about the transport mechanism of metal ions by eukaryotic cells. Some insight has been gained from studies of the mammalian transporter DCT1 and the yeast transporter Smf1p by following the uptake of various metal ions and from electrophysiological experiments using Xenopus laevis oocytes injected with RNA copies (c-RNA) of the genes for these transporters. Both transporters catalyze the proton-dependent uptake of divalent cations accompanied by a ‘slippage’ phenomenon of different monovalent cations unique to each transporter. Here, we further characterize the transport activity of DCT1 and Smf1p, their substrate specificity and their transport properties. We observed that Zn(2+) is not transported through the membrane of Xenopus laevis oocytes by either transporter, even though it inhibits the transport of the other metal ions and enables protons to ‘slip’ through the DCT1 transporter. A special construct (Smf1p-s) was made to enhance Smf1p activity in oocytes to enable electrophysiological studies of Smf1p-s-expressing cells. 54Mn(2+) uptake by Smf1p-s was measured at various holding potentials. In the absence of Na(+) and at pH 5.5, metal-ion uptake was not affected by changes in negative holding potentials. Elevating the pH of the medium to 6.5 caused metal-ion uptake to be influenced by the holding potential: ion uptake increased when the potential was lowered. Na(+) inhibited metal-ion uptake in accordance with the elevation of the holding potential. A novel clutch mechanism of ion slippage that operates via continuously variable stoichiometry between the driving-force pathway (H(+)) and the transport pathway (divalent metal ions) is proposed. The possible physiological advantages of proton slippage through DCT1 and of Na(+) slippage through Smf1p are discussed.

An all-in-one approach for synthesis and functionalization of nano colloidal gold with acetylacetone

2021 ◽  
Author(s):  
Li Zhang ◽  
Hongcen Zheng ◽  
Yonghai Gan ◽  
Bingdang Wu ◽  
Zhihao Chen ◽  
...  
Keyword(s):  
Exchange Reaction ◽  
Ligand Exchange ◽  
Fold Increase ◽  
Charge Transfer Complexes ◽  
Photochemical Property ◽  
Exchange Reactions ◽  
Ligand Exchange Reaction ◽  
Enhanced Photoluminescence ◽  
Good Imaging ◽  
Imaging Probes

Abstract Controllable synthesis, proper dispersion, and feasible functionalization are crucial requirements for the application of nanomaterials in many scenarios. Here, we report an all-in-one approach for the synthesis and functionalization of gold nanoparticles (AuNPs) with the simplest β-diketone, acetylacetone (AcAc). With this approach, the particle size of the resultant AuNPs was tunable by simply adjusting the light intensity or AcAc dosage. Moreover, owing to the capping role of AcAc, the resultant AuNPs could be stably dispersed in water for a year without obvious change in morphology and photochemical property. Formation of ligand to metal charge transfer complexes was found to play an important role in the redox conversion of Au with AcAc. Meanwhile, the moderate complexation ability enables the surface AcAc on the AuNPs to undergo ligand exchange reactions. With the aid of Ag+, the AuNPs underwent ligand exchange reaction with glutathione and exhibited enhanced photoluminescence (PL) with a maximum of 22-fold increase in PL intensity. The PL response was linear to the concentration of glutathione in the range of 0~500 μM. Such a ligand exchange reaction makes the obtained AuNPs being good imaging probes. To the best of our knowledge, this is the first work on illustrating the roles of AcAc as a multifunctional ligand in fabrication of NPs, which sheds new light on the surface modulation in synthesis of nanomaterials.

scholarly journals Regioselective Synthesis of 5-Propyl-2-((trityloxy)methyl)thiophene-3-carbaldehyde

Molbank ◽  
10.3390/m1289 ◽  
2021 ◽  
Vol 2021 (4) ◽  
pp. M1289
Author(s):  
Sukanta Bar
Keyword(s):  
Exchange Reaction ◽  
Regioselective Synthesis ◽  
Exchange Reactions ◽  
Halogen Exchange

5-propyl-2-((trityloxy)methyl)thiophene-3-carbaldehyde was synthesized by using the concept of chemo- and regioselective Br/Li exchange reaction from 3-bromo-5-propyl-2-((trityloxy)methyl)thiophene. This is a five-step protocol starting from thiophene with an overall yield of 33%. These lithium/halogen exchange reactions were carried out at −78 °C to rt over the period of 1 to 18 h depending on the reactivity of electrophiles.

Sign in / Sign up

Export Citation Format

Share Document