scholarly journals Kinetics of protein modification and enzyme inactivation reactions: interpretation of reaction order

1985 ◽  
Vol 231 (2) ◽  
pp. 493-494 ◽  
Author(s):  
E T Rakitzis
Keyword(s):  
Protein Modification ◽  
Reaction Order ◽  
Enzyme Inactivation ◽  
Kinetics Of

scholarly journals Kinetics of protein-modification reactions. Stoichiometry of modification-produced enzyme inactivation: modification of rhodanese by 2,4,6-trinitrobenzenesulphonic acid

1985 ◽  
Vol 230 (1) ◽  
pp. 89-93 ◽  
Author(s):  
E T Rakitzis ◽  
T B Malliopoulou
Keyword(s):  
Protein Modification ◽  
Reaction Medium ◽  
Enzyme Inactivation ◽  
Mathematical Treatment ◽  
Modifying Agent ◽  
Catalytic Function ◽  
Reactive Groups ◽  
Decreasing Ph ◽  
Activity Loss ◽  
Kinetics Of

A mathematical treatment is presented for the dependence of enzyme activity loss on the numbers and reactivities of the groups essential for catalytic function, when enzyme protein modification is carried out by the use of concentrations of protein reactive groups well in excess of that of modifying agent. Experimentally obtained data on the modification of rhodanese (thiosulphate sulphurtransferase, EC 2.8.1.1) by 2,4,6-trinitrobenzenesulphonic acid are presented, and it is shown that, at pH9.00, the fractional concentration of rhodanese groups, or of rhodanese group reactivities, essential for enzyme catalytic function is 0.88; this value is found to decrease with decreasing pH of the reaction medium. The possibility that rhodanese inactivation by 2,4,6-trinitrobenzenesulphonic acid is brought about by modification of groups other than amino groups is ruled out by a comparison of the enzyme-inactivation and protein-modification stoichiometries, for putative reaction models for enzyme and modifying agent.

The effect of electrondonors on the polymerization kinetics of isoprene

1980 ◽  
Vol 45 (12) ◽  
pp. 3338-3346
Author(s):  
Miroslav Kašpar ◽  
Jiří Trekoval
Keyword(s):  
Induction Period ◽  
Ethyl Ether ◽  
Reaction Order ◽  
Propagation Rate ◽  
Reaction Scheme ◽  
Polymerization Kinetics ◽  
Polymerization Rate ◽  
Constant Concentration ◽  
Initial Concentration ◽  
Kinetics Of

The effect of small additions of 1-octene, butyl ethyl ether and triethylamine on the polymerization kinetics of isoprene (2-methyl-1,3-butadiene) in benzene initiated with butyllithium was investigated by employing the GLC analysis. The addition of 1-octane was reflected only in a shorter induction period of the reaction; the effect on the propagation rate was insignificant. With the increasing amount of butyl ethyl ether, the polymerization rate increases linearly, while the reaction order with respect to the concentration of triethylamine is variable and increases from 0.33 to 0.66 with the increasing concentration of the initiator. For a constant concentration of triethylamine, the reaction order with respect to the initial concentration of the initiator was found to vary considerably, reaching even negative values. A reaction scheme was suggested, taking into account the competition between two different solvates of alkyllithium.

Investigating the relationship between tack and degree of conversion in DGEBA-based epoxy resin cured with dicyandiamide and diuron

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ali Kuliaei ◽  
Iraj Amiri Amraei ◽  
Seyed Rasoul Mousavi
Keyword(s):  
Epoxy Resin ◽  
Reaction Order ◽  
Theoretical Data ◽  
Cure Kinetics ◽  
Diglycidyl Ether ◽  
Degree Of Conversion ◽  
Ozawa Method ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Kinetics Of

Abstract The purpose behind this research was to determine the optimum formulation and investigate the cure kinetics of a diglycidyl ether of bisphenol-A (DGEBA)-based epoxy resin cured by dicyandiamide and diuron for use in prepregs. First, all formulations were examined by the tensile test, and then, the specimens with higher mechanical properties were further investigated by viscometry and tack tests. The cure kinetics of the best formulation (based on tack test) in nonisothermal mode was investigated using differential scanning calorimetry at different heating rates. Kissinger and Ozawa method was used for determining the kinetic parameters of the curing process. The activation energy obtained by this method was 71.43 kJ/mol. The heating rate had no significant effect on the reaction order and the total reaction order was approximately constant ( m + n ≅ 2.1 $m+n\cong 2.1$ ). By comparing the experimental data and the theoretical data obtained by Kissinger and Ozawa method, a good agreement was seen between them. By increasing the degree of conversion, the viscosity decreased; as the degree of conversion increased, so did the slope of viscosity. The results of the tack test also indicated that the highest tack could be obtained with 25% progress of curing.

scholarly journals The kinetics of the hydrogen chloride oxidation

2013 ◽  
Vol 78 (12) ◽  
pp. 2115-2130 ◽  
Author(s):  
Martinez Gonzalez ◽  
Tanja Vidakovic-Koch ◽  
Rafael Kuwertz ◽  
Ulrich Kunz ◽  
Thomas Turek ◽  
...  
Keyword(s):  
Kinetic Parameters ◽  
Gas Phase ◽  
Hydrogen Chloride ◽  
Reaction Order ◽  
Membrane Electrode ◽  
Polarization Data ◽  
Rate Determining Step ◽  
Electrode Assemblies ◽  
Apparent Kinetic Parameters ◽  
Kinetics Of

Hydrogen chloride (HCl) oxidation has been investigated on technical membrane electrode assemblies in a cyclone flow cell. Influence of Nafion loading, temperature and hydrogen chloride mole fraction in the gas phase has been studied. The apparent kinetic parameters like reaction order with respect to HCl, Tafel slope and activation energy have been determined from polarization data. The apparent kinetic parameters suggest that the recombination of adsorbed Cl intermediate is the rate determining step.

scholarly journals The Study on the Reaction Order and Kinetics of Total Oxidation Reaction of m-xylene over LaMnO3 Perovskite Catalyst

2018 ◽  
Vol 34 (3) ◽  
Author(s):  
Tran Thi Thu Huyen ◽  
Dang Thi Minh Hue ◽  
Nguyen Thi Tuyet Mai ◽  
Tran Thi Luyen ◽  
Nguyen Thi Lan
Keyword(s):  
Catalytic Activity ◽  
Reaction Order ◽  
Catalytic Properties ◽  
Sol Gel ◽  
Deep Oxidation ◽  
Perovskite Oxide ◽  
Mixed Metal Oxide ◽  
Total Oxidation ◽  
Kinetics Of ◽  
Perovskite Type

Gases of m-xylene is one of the popurlar toxic pollutants in the exhaust gases, it is emitted into the environment from factories and engines because the fuel in the engine does not burn completely. The best solution in order to remove this toxic gases of m-xylene to protect the environment is transforming them completely into CO2 and H2O by catalysts. Perovskite of LaMnO3 is one of the catalysts that was synthesized and studied the catalytic properties in total oxidation of m-xylene in our previous report. Obtained results showed that the LaMnO3 perovskite has good catalytic characterizations such as large surface area and the amount of α-oxygen adsorbed on the catalyst is large too. So, it exhibits a good catalytic activity in total oxidation of m-xylene at relatively low reaction temperature. In present work, the reaction order  and kinetics of this reaction are determined. The obtained results demonstrated that the reaction order value with respect to m-xylene is equal to about 1, to oxygene is proximately equal to 0 and the order of reaction is equal to about 1. Based on reaction order data, it was thought that the pathway of m-xylene oxidation by air oxygen  over LaMnO3 may be followed through which the Langmuir - Hinshelwood mechanism. Keywords Catalyst, perovskite, oxidation, m-xylene, kinetics References [1] Penã M.A and Fierro J.L.G (2001), << Chemical Stuctures and Performance of Perovskite Oxide>>, Chem. Rev, 101, pp 1981-2018. [2] Seiyama T., Yamazoe N. and Eguchi K. (1985), <<Characterization and Activity of some Mixed Metal Oxide Catalysts>>, Ind. Eng. Chem. Prod. Res. Dev., 24, pp. 19-27.[3] [3] Van Santen R. A., Neurock M. (2006), Molecular Heterogeneous catalysis, Wiley – VCH, pp.62-244. [4] Petrovics, Terlecki - Baricevic A., Karanovic Lj., Kirilov - Stefanov P. , Zdujic M., Dondur V., Paneva D., Mitov I., Rakic V. (2008), <<LaMO3 (M = Mg, Ti, Fe) perovskite type oxides : Preparation, Characterization and Catalytic Properties in Methane deep Oxidation>>, Appl. Catal. B, Env., 79, pp. 186-198. [5] Spinicci R., Tofanari A., Faticanti M., Pettiti I. and Porta P. (2001), <<Hexane Total Oxidation on LaMO3 (M = Mn, Co, Fe) perovskite-type oxides>>, J. Mole. Catal., 176, pp. 247-252. [6] Trần Thị Thu Huyền, Nguyễn Thị Minh Hiền, Nguyễn Hữu Phú (2006), <<Study on the preparation of perovskite oxides La1-xSrxMnO3 (x = 0; 0,3; 0,5) by sol - gel citrate method and their catalytic activity for m-xylene toltal oxidation>>, Hội nghị xúc tác và hấp phụ toàn quốc lần thứ IV, Tp. Hồ Chí Minh, Tr. 477-482.[7] Trần Thị Thu Huyền, Nguyễn Thị Minh Hiền, Nguyễn Hữu Phú (2009), <<Nghiên cứu động học của phản ứng oxi hóa hoàn toàn m-xylen trên các xúc tác perovskit LaMnO3 và La0,7A0,3MnO3 (A = Sr, Ca, Mg)>>, Tạp chí Hóa học, T.47 (6A), Tr 132-136.[8] Geoffrey C. Bond, Catherine Louis, David T. Thompson (2006), <<Catalysis by Gold>>, Catalytic Science Series-Vol.6.

Sign in / Sign up

Export Citation Format

Share Document