scholarly journals Mitochondrial-reticular cytostructure in liver cells

1983 ◽  
Vol 214 (3) ◽  
pp. 795-813 ◽  
Author(s):  
J Katz ◽  
P A Wals ◽  
S Golden ◽  
L Raijman
Keyword(s):  
Endoplasmic Reticulum ◽  
High Speed ◽  
Citrate Synthase ◽  
Respiratory Control ◽  
High Salt ◽  
Marker Enzyme ◽  
Salt Medium ◽  
Low Speed ◽  
Low Salt ◽  
Specific Activities

This study examines the structural relationship of mitochondria and the endoplasmic reticulum in liver. Livers of rat and Japanese quail were homogenized and fractionated in media of 0.25 M-sucrose, either 5mM or 50 mM in sodium Hepes [4-(2-hydroxyethyl)-1-piperazine-ethanesulphonic acid], pH 7.4 (2.2 mM or 22 mM in Na respectively), designated here as low- and high-salt media. Three particulate fractions were prepared by sequential centrifugation. A nuclear pellet sedimenting at 300 g was obtained as described by Shore & Tata [(1977) J. Cell Biol. 72, 714-725], and from the resulting supernatant thereof a low-speed pellet (1100-1500 g) and a high-speed pellet (8000-10 000 g) were prepared. In the low-salt medium the yields of mitochondrial matrix enzymes (citrate synthase, glutamate dehydrogenase, ornithine carbamoyltransferase) and their specific activities in the low-speed pellet were over twice those in the high-speed pellet. In the high-salt medium the yield of matrix enzymes was 4-5 times, and the specific activities were up to 3 times, higher in the low-speed pellet than in the high-speed pellet. Oxygen uptake and respiratory control ratio were also much higher in the low-speed pellets in both media. Some 50-65% of the microsomal marker enzyme glucose 6-phosphatase was in the supernatant from the high-speed pellet, and the rest sedimented with the mitochondria. Repeated washing with the high-salt medium removes only a limited amount of reticulum. Washing with salt-free sucrose removes most of the reticulum, but a fraction remains strongly bound to mitochondria. Homogenates from quail and rat liver were fractioned isopycnically on Percoll gradients in either 0.25 M-sucrose or 0.25 M-sucrose/50 mM-sodium Hepes. Up to five particulate bands were separated and assayed. Mitochondria were present in two to three bands and were associated with endoplasmic reticulum. As seen in the phase-contrast microscope the mitochondria prepared in the low-salt medium consist of separate organelles. In the high-salt medium the mitochondria appear as chains of from three to ten organelles not touching each other. On addition of univalent ions at concentrations above 20 mM, the mitochondria aggregate into chains, and at higher ionic strength larger multidimensional aggregates are formed. The dispersion and aggregation of mitochondria are reversible. Negatively stained electron micrographs reveal a branched mitochondrial structure, with mitochondria held together by strands of reticulum.(ABSTRACT TRUNCATED AT 400 WORDS)

scholarly journals Studies on halotolerance in a moderately halophilic bacterium. Effect of betaine on salt resistance of the respiratory system

1968 ◽  
Vol 109 (4) ◽  
pp. 687-691 ◽  
Author(s):  
Dvora Rafaeli-Eshkol ◽  
Y. Avi-Dor
Keyword(s):  
Sodium Chloride ◽  
Respiratory Rate ◽  
Respiratory System ◽  
Chloride Concentration ◽  
Salt Resistance ◽  
High Salt ◽  
Salt Medium ◽  
Sodium Chloride Concentration ◽  
Moderately Halophilic ◽  
Low Salt

The role of betaine as a factor influencing the salt resistance of the respiratory system in resting cells of the moderately halophilic halotolerant bacterium Ba1 was studied. Betaine accelerated succinate oxidation in cells obtained from low-salt medium, and stimulation of the respiratory rate was stronger the higher the sodium chloride concentration in the assay medium. The stimulatory effect also depended on the ratio of betaine concentration to the amount of bacteria present. Accumulation of labelled betaine by the bacterial cells was demonstrated; like the respiratory stimulation, it was favourably influenced by an increase in the sodium chloride concentration of the medium. In cells harvested from a high-salt medium and washed with 2·0m-sodium chloride, betaine caused no increase in the respiratory rate, nor was the already high salt resistance of the respiratory system further improved by the addition of betaine. When, however, these cells lost their salt resistance as a result of washing in the absence of sodium chloride, betaine was able to restore it to its original level. In contrast with respiration in low-salt-grown bacteria, that in high-salt-grown cells was not affected by betaine, even after they were washed in the absence of sodium chloride, when the sodium chloride concentration was optimum.

Survival and reversion of a stable L form in soil

1978 ◽  
Vol 24 (1) ◽  
pp. 50-55 ◽  
Author(s):  
A. H. Horwitz ◽  
L. E. Casida Jr.
Keyword(s):  
High Salt ◽  
Salt Medium ◽  
Bacterial Form ◽  
Original Parent ◽  
Low Salt ◽  
Colonial Morphology

The stable L form of Agromyces ramosus reverted to a bacterial form when incubated in sterilized soil. The cellular and colonial morphology of this bacterial form resembled that of the original parent bacterial form. The two forms differed, however, in that the revertant maintained its bacterial form when transferred onto a low-salt (NaCl) medium but was virtually completely induced into the L-form state on a high-salt medium. The original parent bacterial form was not sensitive to salt. The possibility is discussed that an L-form ↔ bacterial-form cycle for this bacterium might occur naturally in soil. This cycle would be mediated by fluctuations in local salt concentrations in the soil.

Image quality vs data obtainment in biological electron microscopy

1986 ◽  
Vol 44 ◽  
pp. 42-43
Author(s):  
J. E. Johnson
Keyword(s):  
Electron Microscopy ◽  
Endoplasmic Reticulum ◽  
Electron Beam ◽  
Image Quality ◽  
High Speed ◽  
Early Period ◽  
Early Years ◽  
Fluorescent Screen ◽  
Embedding Medium

In the early years of biological electron microscopy, scientists had their hands full attempting to describe the cellular microcosm that was suddenly before them on the fluorescent screen. Mitochondria, Golgi, endoplasmic reticulum, and other myriad organelles were being examined, micrographed, and documented in the literature. A major problem of that early period was the development of methods to cut sections thin enough to study under the electron beam. A microtome designed in 1943 moved the specimen toward a rotary “Cyclone” knife revolving at 12,500 RPM, or 1000 times as fast as an ordinary microtome. It was claimed that no embedding medium was necessary or that soft embedding media could be used. Collecting the sections thus cut sounded a little precarious: “The 0.1 micron sections cut with the high speed knife fly out at a tangent and are dispersed in the air. They may be collected... on... screens held near the knife“.

Do You Name Speedy Objects Faster Than Slow Objects: SPEEDED NAMING OR NAMING SPEED? THE AUTOMATIC EFFECT OF OBJECT SPEED ON PERFORMANCE

2018 ◽  
Author(s):  
Moshe Shay Ben-Haim ◽  
Eran Chajut ◽  
Ran Hassin ◽  
Daniel Algom
Keyword(s):  
High Speed ◽  
Mental Representations ◽  
Reading Aloud ◽  
Naming Task ◽  
Naming Speed ◽  
Low Speed ◽  
Everyday Objects ◽  
Pictures And Words

we test the hypothesis that naming an object depicted in a picture, and reading aloud an object’s name, are affected by the object’s speed. We contend that the mental representations of everyday objects and situations include their speed, and that the latter influences behavior in instantaneous and systematic ways. An important corollary is that high-speed objects are named faster than low-speed objects despite the fact that object speed is irrelevant to the naming task at hand. The results of a series of 7 studies with pictures and words support these predictions.

scholarly journals Splatters and Aerosols Contamination in Dental Aerosol Generating Procedures

2021 ◽  
Vol 11 (4) ◽  
pp. 1914
Author(s):  
Pingping Han ◽  
Honghui Li ◽  
Laurence J. Walsh ◽  
Sašo Ivanovski
Keyword(s):  
Particle Size ◽  
Disease Transmission ◽  
High Speed ◽  
Low Speed ◽  
Dental Procedures ◽  
Dental Equipment ◽  
Produce Contamination ◽  
Fluorescein Dye ◽  
Filter Papers ◽  
Airborne Disease

Dental aerosol-generating procedures produce a large amount of splatters and aerosols that create a major concern for airborne disease transmission, such as COVID-19. This study established a method to visualise splatter and aerosol contamination by common dental instrumentation, namely ultrasonic scaling, air-water spray, high-speed and low-speed handpieces. Mock dental procedures were performed on a mannequin model, containing teeth in a typodont and a phantom head, using irrigation water containing fluorescein dye as a tracer. Filter papers were placed in 10 different locations to collect splatters and aerosols, at distances ranging from 20 to 120 cm from the source. All four types of dental equipment produced contamination from splatters and aerosols. At 120 cm away from the source, the high-speed handpiece generated the greatest amount and size (656 ± 551 μm) of splatter particles, while the triplex syringe generated the largest amount of aerosols (particle size: 1.73 ± 2.23 μm). Of note, the low-speed handpiece produced the least amount and size (260 ± 142 μm) of splatter particles and the least amount of aerosols (particle size: 4.47 ± 5.92 μm) at 120 cm. All four dental AGPs produce contamination from droplets and aerosols, with different patterns of distribution. This simple model provides a method to test various preventive strategies to reduce risks from splatter and aerosols.

Nonlinear transport of rarefied Couette flows from low speed to high speed

2020 ◽  
Vol 32 (11) ◽  
pp. 112021
Author(s):  
Jihui Ou ◽  
Jie Chen
Keyword(s):  
High Speed ◽  
Nonlinear Transport ◽  
Low Speed

scholarly journals Energy Absorption Characteristics of PVC Coarse Aggregate Concrete under Impact Load

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Shi Hu ◽  
Huaming Tang ◽  
Shenyao Han
Keyword(s):  
Compressive Strength ◽  
Energy Absorption ◽  
High Speed ◽  
Coarse Aggregate ◽  
Specific Energy Absorption ◽  
Low Speed ◽  
High Speed Impact ◽  
Aggregate Content ◽  
Dynamic Compressive Strength ◽  
Absorption Characteristics

AbstractIn this paper, polyvinyl chloride (PVC) coarse aggregate with different mixing contents is used to solve the problems of plastic pollution, low energy absorption capacity and poor damage integrity, which provides an important reference for PVC plastic concrete used in the initial support structures of highway tunnels and coal mine roadway. At the same time, the energy absorption characteristics and their relationship under different impact loads are studied, which provides an important reference for predicting the energy absorption characteristics of concrete under other PVC aggregate content or higher impact speed. This study replaced natural coarse aggregate in concrete with different contents and equal volume of well-graded flaky PVC particles obtained by crushing PVC soft board. Also, slump, compression, and splitting strength tests, a free falling low-speed impact test of steel balls and a high-speed impact compression test of split Hopkinson pressure bar (SHPB) were carried out. Results demonstrate that the static and dynamic compressive strength decreases substantially, and the elastic modulus and slump decrease slowly with the increase of the mixing amount of PVC aggregate (0–30%). However, the energy absorption rate under low-speed impact and the specific energy absorption per MPa under high-speed impact increase obviously, indicating that the energy absorption capacity is significantly enhanced. Regardless of the mixing amount of PVC aggregate, greater strain rate can significantly enhance the dynamic compressive strength and the specific energy absorption per MPa. After the uniaxial compression test or the SHPB impact test, the relative integrity of the specimen is positively correlated with the mixing amount of PVC aggregate. In addition, the specimens are seriously damaged with the increase of the impact strain rate. When the PVC aggregate content is 20%, the compressive strength and splitting strength of concrete are 33.8 MPa and 3.26 MPa, respectively, the slump is 165 mm, the energy absorption rate under low-speed impact is 89.5%, the dynamic compressive strength under 0.65 Mpa impact air pressure is 58.77 mpa, and the specific energy absorption value per MPa is 13.33, which meets the requirements of shotcrete used in tunnel, roadway support and other impact loads. There is a linear relationship between the energy absorption characteristics under low-speed impact and high-speed impact. The greater the impact pressure, the larger the slope of the fitting straight line. The slope and intercept of the fitting line also show a good linear relationship with the increase of impact pressure. The conclusions can be used to predict the energy absorption characteristics under different PVC aggregate content or higher-speed impact pressure, which can provide important reference for safer, more economical, and environmental protection engineering structure design.

scholarly journals Analytical subcellular fractionation of needle-biopsy specimens from human liver

1978 ◽  
Vol 174 (2) ◽  
pp. 435-446 ◽  
Author(s):  
T J Peters ◽  
C A Seymour
Keyword(s):  
Endoplasmic Reticulum ◽  
Plasma Membrane ◽  
Density Gradient ◽  
Needle Biopsy ◽  
Human Liver ◽  
Resolving Power ◽  
Equilibrium Density ◽  
Marker Enzyme ◽  
Acid Hydrolases ◽  
Biopsy Specimens

1. Fragments (2-20 mg wet wt.) of closed needle-biopsy specimens from human liver were disrupted in iso-osmotic sucrose and subjected to low-speed centrifugation. The supernatant was layered on a linear sucrose-density gradient in the Beaufay small-volume automatic zonal rotor. The following organelles, with equilibrium densities (g/ml) and principal marker enzyme shown in parentheses, were resolved: plasma membrane (1.12-1.14; 5′-nucleotidase); lysosomes (1.15-1.20; N-acetyl-beta-glucosaminidase); mitochondria (1.20; malate dehydrogenase); endoplasmic reticulum (1.17-1.21; neutral alpha-glucosidase); peroxisomes (1.22-1.24; catalase). 2. The distribution of particulate alkaline phosphatase and, to a lesser degree, leucine 2-naphthylamidase followed that of 5′-nucleotidase. gamma-Glutamyltransferase was associated with membranes of significantly higher equilibrium density than was 5′-nucleotidase. 3. The distribution of 12 acid hydrolases was determined in the density-gradient fractions. beta-Glucosidase had a predominantly cytosolic localization, but the other enzymes showed a broad distribution of activity throughout the gradient. Evidence was presented for two populations of lysosomes with equilibrium densities of 1.15 and 1.20 g/ml, but containing differing amounts of each enzyme. Further evidence of lysosomal heterogeneity was demonstrated by studying the distribution of isoenzymes of hexosaminidase and of acid phosphatase. 4. The resolving power of the centrifugation procedure can be further enhanced with membrane perturbants. Digitonin (0.12 mM) selectively disrupted lysosomes, markedly increased the equilibrium density of plasma-membrane components and lowered the density of the endoplasmic reticulum, but did not affect the mitochondria or peroxisomes. Pyrophosphate (15 mM) selectively lowered the equilibrium density of the endoplasmic reticulum.

Sign in / Sign up

Export Citation Format

Share Document