Crystal structure and kinetic study of dihydrodipicolinate synthase from Mycobacterium tuberculosis

2008 ◽  
Vol 411 (2) ◽  
pp. 351-360 ◽  
Author(s):  
Georgia Kefala ◽  
Genevieve L. Evans ◽  
Michael D. W. Griffin ◽  
Sean R. A. Devenish ◽  
F. Grant Pearce ◽  
...  
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Active Site ◽  
Analytical Ultracentrifugation ◽  
Feedback Inhibition ◽  
Three Dimensional ◽  
Lysine Biosynthesis ◽  
Dimensional Structure ◽  
Dihydrodipicolinate Synthase ◽  
Three Dimensional Structure ◽  
And Function

The three-dimensional structure of the enzyme dihydrodipicolinate synthase (KEGG entry Rv2753c, EC 4.2.1.52) from Mycobacterium tuberculosis (Mtb-DHDPS) was determined and refined at 2.28 Å (1 Å=0.1 nm) resolution. The asymmetric unit of the crystal contains two tetramers, each of which we propose to be the functional enzyme unit. This is supported by analytical ultracentrifugation studies, which show the enzyme to be tetrameric in solution. The structure of each subunit consists of an N-terminal (β/α)8-barrel followed by a C-terminal α-helical domain. The active site comprises residues from two adjacent subunits, across an interface, and is located at the C-terminal side of the (β/α)8-barrel domain. A comparison with the other known DHDPS structures shows that the overall architecture of the active site is largely conserved, albeit the proton relay motif comprising Tyr143, Thr54 and Tyr117 appears to be disrupted. The kinetic parameters of the enzyme are reported: KMASA=0.43±0.02 mM, KMpyruvate=0.17±0.01 mM and Vmax=4.42±0.08 μmol·s−1·mg−1. Interestingly, the Vmax of Mtb-DHDPS is 6-fold higher than the corresponding value for Escherichia coli DHDPS, and the enzyme is insensitive to feedback inhibition by (S)-lysine. This can be explained by the three-dimensional structure, which shows that the (S)-lysine-binding site is not conserved in Mtb-DHDPS, when compared with DHDPS enzymes that are known to be inhibited by (S)-lysine. A selection of metabolites from the aspartate family of amino acids do not inhibit this enzyme. A comprehensive understanding of the structure and function of this important enzyme from the (S)-lysine biosynthesis pathway may provide the key for the design of new antibiotics to combat tuberculosis.

scholarly journals Impact of genetic variation on three dimensional structure and function of proteins

PLoS ONE ◽  
2017 ◽  
Vol 12 (3) ◽  
pp. e0171355 ◽  
Author(s):  
Roshni Bhattacharya ◽  
Peter W. Rose ◽  
Stephen K. Burley ◽  
Andreas Prlić
Keyword(s):  
Genetic Variation ◽  
Three Dimensional ◽  
Structure And Function ◽  
Dimensional Structure ◽  
Three Dimensional Structure ◽  
And Function

scholarly journals Structural Features of a Bacteroidetes-Affiliated Cellulase Linked with a Polysaccharide Utilization Locus

2015 ◽  
Vol 5 (1) ◽  
Author(s):  
A.E. Naas ◽  
A.K. MacKenzie ◽  
B. Dalhus ◽  
V.G.H. Eijsink ◽  
P.B. Pope
Keyword(s):  
Active Site ◽  
Three Dimensional ◽  
Structural Features ◽  
Structure And Function ◽  
Dimensional Structure ◽  
Active Site Cleft ◽  
Polysaccharide Utilization Locus ◽  
And Function ◽  
Rumen Metagenome

Abstract Previous gene-centric analysis of a cow rumen metagenome revealed the first potentially cellulolytic polysaccharide utilization locus, of which the main catalytic enzyme (AC2aCel5A) was identified as a glycoside hydrolase (GH) family 5 endo-cellulase. Here we present the 1.8 Å three-dimensional structure of AC2aCel5A and characterization of its enzymatic activities. The enzyme possesses the archetypical (β/α)8-barrel found throughout the GH5 family and contains the two strictly conserved catalytic glutamates located at the C-terminal ends of β-strands 4 and 7. The enzyme is active on insoluble cellulose and acts exclusively on linear β-(1,4)-linked glucans. Co-crystallization of a catalytically inactive mutant with substrate yielded a 2.4 Å structure showing cellotriose bound in the −3 to −1 subsites. Additional electron density was observed between Trp178 and Trp254, two residues that form a hydrophobic “clamp”, potentially interacting with sugars at the +1 and +2 subsites. The enzyme’s active-site cleft was narrower compared to the closest structural relatives, which in contrast to AC2aCel5A, are also active on xylans, mannans and/or xyloglucans. Interestingly, the structure and function of this enzyme seem adapted to less-substituted substrates such as cellulose, presumably due to the insufficient space to accommodate the side-chains of branched glucans in the active-site cleft.

PREDICTION OF THE THREE-DIMENSIONAL STRUCTURE OF THE ENZYMATIC PART OF T-PA

1987 ◽  
Author(s):  
A Heckel ◽  
K M Hasselbach
Keyword(s):  
Amino Acids ◽  
Amino Acid ◽  
Active Site ◽  
Serine Proteases ◽  
Three Dimensional ◽  
Amino Acid Sequences ◽  
Dimensional Structure ◽  
Salt Bridges ◽  
Three Dimensional Structure ◽  
Insertions And Deletions

Up to now the three-dimensional structure of t-PA or parts of this enzyme is unknown. Using computer graphical methods the spatial structure of the enzymatic part of t-PA is predicted on the hypothesis, the three-dimensional backbone structure of t-PA being similar to that of other serine proteases. The t-PA model was built up in three steps:1) Alignment of the t-PA sequence with other serine proteases. Comparison of enzyme structures available from Brookhaven Protein Data Bank proved elastase as a basis for modeling.2) Exchange of amino acids of elastase differing from the t-PA sequence. The replacement of amino acids was performed such that backbone atoms overlapp completely and side chains superpose as far as possible.3) Modeling of insertions and deletions. To determine the spatial arrangement of insertions and deletions parts of related enzymes such as chymotrypsin or trypsin were used whenever possible. Otherwise additional amino acid sequences were folded to a B-turn at the surface of the proteine, where all insertions or deletions are located. Finally the side chain torsion angles of amino acids were optimised to prevent close contacts of neigh bouring atoms and to improve hydrogen bonds and salt bridges.The resulting model was used to explain binding of arginine 560 of plasminogen to the active site of t-PA. Arginine 560 interacts with Asp 189, Gly 19 3, Ser 19 5 and Ser 214 of t-PA (chymotrypsin numbering). Furthermore interaction of chromo-genic substrate S 2288 with the active site of t-PA was studied. The need for D-configuration of the hydrophobic amino acid at the N-terminus of this tripeptide derivative could be easily explained.

Three-dimensional structure of β-momorcharin at 2.55 Å resolution

1999 ◽  
Vol 55 (6) ◽  
pp. 1144-1151 ◽  
Author(s):  
Yu-Ren Yuan ◽  
Yong-Ning He ◽  
Jian-Ping Xiong ◽  
Zong-Xiang Xia
Keyword(s):  
Active Site ◽  
Structural Model ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Molecular Replacement ◽  
Ribosome Inactivating Protein ◽  
Three Dimensional Structure ◽  
Replacement Method ◽  
Enzymatic Function ◽  
Molecular Replacement Method

β-Momorcharin (Mr ≃ 29 kDa) is a single-chained ribosome-inactivating protein (RIP) with a branched hexasaccharide bound to Asn51. The crystal structure of β-momorcharin has been determined using the molecular-replacement method and refined to 2.55 Å resolution. The final structural model gave an R factor of 17.2% and root-mean-square deviations of 0.016 Å and 1.76° from ideal bond lengths and bond angles, respectively. β-Momorcharin contains nine α-helices, two 310 helices and three β-sheets, and its overall structure is similar to those of other single-chained RIPs. Residues Tyr70, Tyr109, Glu158 and Arg161 are expected to define the active site of β-momorcharin as an rRNA N-glycosidase. The oligosaccharide is linked to the protein through an N-glycosidic bond, β-GlcNAc–(1-N)-Asn51, and stretches from the surface of the N-terminal domain far from the active site, which suggests that it should not play a role in enzymatic function. The oligosaccharide of each β-momorcharin molecule interacts with the protein through hydrogen bonds, although in the crystals most of these are intermolecular interactions with the protein atoms in an adjacent unit cell. This is the first example of an RIP structure which provides information about the three-dimensional structure and binding site of the oligosaccharide in the active chains of RIPs.

scholarly journals 3D Structure of VP1 Structural Protein on Enterovirus A71 Using Swiss-Model

BIOEDUSCIENCE ◽  
2020 ◽  
Vol 4 (1) ◽  
pp. 37-47
Author(s):  
Suprianto ◽  
Made Budiarsa ◽  
Fatmah Dhafir
Keyword(s):  
3D Structure ◽  
Three Dimensional ◽  
Stable Structure ◽  
Target Protein ◽  
Dimensional Structure ◽  
Structural Protein ◽  
Three Dimensional Structure ◽  
Enterovirus A71 ◽  
And Function ◽  
Ramachandran Plots

Background: VP1 structural protein plays a role as a key player in the pathogenesis, has a uniqueness that is interesting enough to be studied by studying the nature and function of structural proteins VP1. This study aims to predict the three-dimensional structure of proteins VP1 on EV-A71. Methods: The target protein is obtained from UniProt server with an access code A0A097EV89using templates 4cey.1.A (PDB ID) were analyzed in silico by homology method using SWISS-MODEL server. Results: Analysis showed the target protein and the template has 95.29% identity and is composed of 297 amino acids with a value of -2.15 QMEAN. Structural protein VP1 in Ramachandran Plots have a stable structure, non-glycine residue in the outlier regions only around 0.34% (A53 ALA) Rated rotamer outliers 1.61%.    Conclusion: The three-dimensional structure model of the protein studied has a stable structure and the information obtained is useful for further research in developing vaccines for diseases caused by EV-A71.  

scholarly journals In silicostructural and functional prediction of African swine fever virus protein-B263R reveals features of a TATA-binding protein

PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e4396 ◽  
Author(s):  
Dickson Kinyanyi ◽  
George Obiero ◽  
George F.O. Obiero ◽  
Peris Amwayi ◽  
Stephen Mwaniki ◽  
...  
Keyword(s):  
African Swine Fever Virus ◽  
Binding Protein ◽  
Three Dimensional ◽  
African Swine Fever ◽  
Tata Binding Protein ◽  
Structure And Function ◽  
Fever Virus ◽  
Dimensional Structure ◽  
Three Dimensional Structure ◽  
And Function

African swine fever virus (ASFV) is the etiological agent of ASF, a fatal hemorrhagic fever that affects domestic pigs. There is currently no vaccine against ASFV, making it a significant threat to the pork industry. The ASFV genome sequence has been published; however, about half of ASFV open reading frames have not been characterized in terms of their structure and function despite being essential for our understanding of ASFV pathogenicity. The present study reports the three-dimensional structure and function of uncharacterized protein, pB263R (NP_042780.1), an open reading frame found in all ASFV strains. Sequence-based profiling and hidden Markov model search methods were used to identify remote pB263R homologs. Iterative Threading ASSEmbly Refinement (I-TASSER) was used to model the three-dimensional structure of pB263R. The posterior probability of fold family assignment was calculated using TM-fold, and biological function was assigned using TM-site, RaptorXBinding, Gene Ontology, and TM-align. Our results suggests that pB263R has the features of a TATA-binding protein and is thus likely to be involved in viral gene transcription.

Sign in / Sign up

Export Citation Format

Share Document