scholarly journals A model for the passage of the neurohypophysial hormones and their related proteins through the rat neurohypophysis

1973 ◽  
Vol 136 (4) ◽  
pp. 1053-1058 ◽  
Author(s):  
Graham D. Burford ◽  
Peter Clifford ◽  
C. W. Jones ◽  
Brian T. Pickering
Keyword(s):  
Mathematical Models ◽  
Model Calculation ◽  
Rate Constant ◽  
Rate Constants ◽  
Exponential Process ◽  
Neurohypophysial Hormones ◽  
Releasable Pool ◽  
Readily Releasable Pool ◽  
Intracisternal Injection ◽  
Related Proteins

The change in the radioactivity of vasopressin–neurophysin in the rat neurohypophysis after an intracisternal injection of [35S]cysteine was fitted to several mathematical models. The data fitted best a model in which there is a linear input of radioactive protein into one pool of the neurohypophysis, from which it is either released by an exponential process or transferred to a second pool from which it is released by a second exponential process with a rate constant much lower than the first. This model is compatible with the existence of a ‘readily releasable’ pool first postulated by Sachs et al. (1967). Data for the change in radioactivity of vasopressin also gave a good fit in this model. Calculation of the rate constants suggested that the first pool represented about 2% of the total hormone.

scholarly journals Effects of thimerosal on the transient kinetics of inositol 1,4,5-trisphosphate-induced Ca2+ release from cerebellar microsomes

1997 ◽  
Vol 325 (1) ◽  
pp. 177-182 ◽  
Author(s):  
Mokdad MEZNA ◽  
Francesco MICHELANGELI
Keyword(s):  
Rate Constant ◽  
Rate Constants ◽  
Slow Component ◽  
Kinetic Studies ◽  
Hill Coefficient ◽  
Slow Phase ◽  
Transient Kinetics ◽  
Exponential Process ◽  
Inositol 1,4,5 Trisphosphate ◽  
Two Phases

Thimerosal, a thiol-reactive reagent, has been shown to increase the cytosolic Ca2+ concentration in a variety of cells by sensitizing inositol 1,4,5-trisphosphate (InsP3) receptors. Thimerosal can have both sensitizing (at concentrations of < 2 μM) and inhibitory (at concentrations of > 2 μM) effects on InsP3-induced Ca2+ release (IICR) from cerebellar microsomes. Transient kinetic studies were performed by employing a fluorimetric stopped-flow approach using fluo-3. IICR was found to be a bi-exponential process with a fast and a slow component. At a maximal InsP3 concentration (20 μM), the fast phase had a rate constant of 0.9 s-1 and the slow phase had a rate constant of 0.4 s-1. The amplitudes of the two phases were 60% and 40% respectively. When the rate constants for the two phases were plotted as Hill plots, the processes were found to be non-co-operative in both cases (Hill coefficient of 1.0), thus arguing for a simple mechanism linking InsP3 binding to channel opening. At a submaximal InsP3 concentration (0.2 μM), where the sensitizing effects of thimerosal are most pronounced, thimerosal increased the rate constants of both phases in a sigmoidal fashion, with a Hill coefficient of 4.0, suggesting that several cysteine residues (up to four) need to be modified in order for maximum sensitization to occur. The rate constants remained elevated even at thimerosal concentrations that inhibited IICR. The amplitude or extent of Ca2+ release was, however, elevated to a much greater extent in the slow phase, suggesting that the two phases respond differently. At maximal InsP3 concentrations, thimerosal has no effect upon the rate constants but inhibits the amplitude of Ca2+ release.

Determination of rate constants of redox reactions of second order from current-less potential-time curves by a simplified graphical-numerical method

1983 ◽  
Vol 48 (5) ◽  
pp. 1358-1367 ◽  
Author(s):  
Antonín Tockstein ◽  
František Skopal
Keyword(s):  
Numerical Method ◽  
Explicit Form ◽  
Rate Constant ◽  
Optimization Algorithm ◽  
Rate Constants ◽  
Redox Reactions ◽  
Second Order ◽  
Wide Region ◽  
Recurrent Formula

A method for constructing curves is proposed that are linear in a wide region and from whose slopes it is possible to determine the rate constant, if a parameter, θ, is calculated numerically from a rapidly converging recurrent formula or from its explicit form. The values of rate constants and parameter θ thus simply found are compared with those found by an optimization algorithm on a computer; the deviations do not exceed ±10%.

The Effect of p-Toluidine on the Two-Step Electroreduction of Zn(II) in Water-Methanol and Water-Dimethylformamide

1999 ◽  
Vol 64 (4) ◽  
pp. 585-594 ◽  
Author(s):  
Barbara Marczewska
Keyword(s):  
Electron Transfer ◽  
Binary Mixtures ◽  
Rate Constant ◽  
Rate Constants ◽  
Electrode Surface ◽  
Mercury Electrode ◽  
Forward Rate ◽  
Solvent Molecules ◽  
Activated Complex

The acceleration effect of p-toluidine on the electroreduction of Zn(II) on the mercury electrode surface in binary mixtures water-methanol and water-dimethylformamide is discussed. The obtained apparent and true forward rate constants of Zn(II) reduction indicate that the rate constant of the first electron transfer increases in the presence of p-toluidine. The acceleration effect may probably be accounted for by the concept of the formation on the mercury electrode an activated complex, presumably composed of p-toluidine and solvent molecules.

Radiolysis studies on the corrosion inhibitors 1 -hexyn-3-ol, cinnamonitrile, and 1,3-diethyl-2-thiourea

1995 ◽  
Vol 73 (12) ◽  
pp. 2137-2142 ◽  
Author(s):  
A.J. Elliot ◽  
M.P. Chenier ◽  
D.C. Ouellette
Keyword(s):  
Hydrogen Atom ◽  
Hydroxyl Radical ◽  
Temperature Dependence ◽  
Rate Constant ◽  
Rate Constants ◽  
Corrosion Inhibitors ◽  
Hydrated Electron

In this publication we report: (i) the rate constants for reaction of the hydrated electron with 1-hexyn-3-ol ((8.6 ± 0.3) × 108 dm3 mol−1 s−1 at 18 °C), cinnamonitrile ((2.3 ± 0.2) × 1010 dm3 mol−1 s−1 at 20 °C), and 1,3-diethyl-2-thiourea ((3.5 ± 0.3) × 108 dm3 mol−1 s−1 at 22 °C). For cinnamonitrile and diethylthiourea, the temperature dependence up to 200 °C and 150 °C, respectively, is also reported; (ii) the rate constants for the reaction of the hydroxyl radical with 1-hexyn-3-ol ((5.5 ± 0.5) × 109 dm3 mol−1 s−1 at 20 °C), cinnamonitrile ((9.2 ± 0.3) × 109 dm3 mol−1 s−1 at 21 °C), and diethylthiourea ((8.0 ± 0.8) × 108 dm3 mol−1 s−1 at 22 °C). For cinnamonitrile, the temperature dependence up to 200 °C is also reported; (iii) the rate constant for the hydrogen atom reacting with 1-hexyn-3-ol ((4.3 ± 0.4) × 109 dm3 mol−1 s−1 at 20 °C). Keywords: radiolysis, corrosion inhibitors, rate constants.

DISTRIBUTION OF NEUROSECRETORY GRANULES AMONG THE ANATOMICAL COMPARTMENTS OF THE NEUROSECRETORY PROCESSES OF THE PITUITARY GLAND: A QUANTITATIVE ULTRASTRUCTURAL APPROACH TO HORMONE STORAGE IN THE NEURAL LOBE

1976 ◽  
Vol 68 (2) ◽  
pp. 225-NP ◽  
Author(s):  
J. F. MORRIS
Keyword(s):  
Basement Membrane ◽  
Pituitary Gland ◽  
Neurosecretory Granules ◽  
Neural Lobe ◽  
Releasable Pool ◽  
Readily Releasable Pool ◽  
Rat Pituitary ◽  
Axonal Swellings ◽  
Granule Release

SUMMARY The distribution of neurosecretory granules in various anatomical compartments of neurosecretory axons of the neural lobe of the rat pituitary has been studied. Apart from the most anterior tip of the gland, where granules are largely restricted to undilated axons and a few 'swellings', the proportional compartmental storage of granules is essentially homogeneous for the rest of the gland: 13% of granules are found in undilated axons, 31% in axonal 'endings' (which contain microvesicles and abut the basement membrane) and 55% in axonal 'swellings' (which are devoid of significant numbers of microvesicles). These values indicate that the 'endings' contain a much greater proportion of the total number of granules stored in the neural lobe than would be predicted if the readily releasable pool of hormone were composed of all the granules in the 'endings'. Some further constraint on granule release either physiological or anatomical (e.g. the position of the granule in relation to the plasmalemma of the 'ending') must be operative.

An ICR mass spectrometry study of ion/molecule reactions between ethyl chloride and alkylamines

1991 ◽  
Vol 69 (2) ◽  
pp. 363-367
Author(s):  
Guoying Xu ◽  
Jan A. Herman
Keyword(s):  
Mass Spectrometry ◽  
Key Words ◽  
Rate Constant ◽  
Rate Constants ◽  
Ethyl Chloride ◽  
Ion Molecule Reactions ◽  
Mass Spectrometry Study ◽  
Ethyl Cation

Ion/molecule reactions in mixtures of ethyl chloride with C1–C4 alkylamines were studied by ICR mass spectrometry. Ethyl cation transfer to C1–C4 alkylamines proceeds mainly through diethylchloronium ions with rate constants ~3 × 10−10cm3 s−1. In the case of s-butylamine the corresponding rate constant is 0.5 × 10−10 cm3 s−1. Key words: ICR mass spectrometry, ion/molecule reactions, ethylchloride, methylamine, ethylamine, propylamines, butylamines

Mechanistic studies of aromatic ketone-sensitized photoreduction of bis(acetylacetonato)copper(II)

1983 ◽  
Vol 61 (5) ◽  
pp. 801-808 ◽  
Author(s):  
Yuan L. Chow ◽  
Gonzalo E. Buono-Core ◽  
Bronislaw Marciniak ◽  
Carol Beddard
Keyword(s):  
Rate Constant ◽  
Rate Constants ◽  
Flash Photolysis ◽  
Decay Rates ◽  
Polynuclear Aromatic Hydrocarbons ◽  
Aromatic Ketone ◽  
Quantum Yields ◽  
Triplet States ◽  
Quenching Rate ◽  
Triplet Energy

Bis(acetylacetonato)copper(II), Cu(acac)2, quenches triplet excited states of ketones and polynuclear aromatic hydrocarbons efficiently, but only aromatic ketones with high triplet energy successfully sensitize photoreduction of Cu(acac)2 in alcohols under nitrogen to give derivatives of aeetylacetonatocopper(I), Cu(acac). For the triplet state benzophenone-sensitized photoreduction of Cu(acac)2, the quantum yields of photoreduction (ΦC) and those of benzophenone disappearance (ΦB) were determined in methanol with various concentrations of Cu(acac)2. The values of the quenching rate constant, kq, determined from these two types of monitors on the basis of the proposed mechanism were in good agreement (6.89 ~ 7.35 × 109 M−1 s−1). This value was higher, by a factor of about two, than that obtained from the monitor of the benzophenone triplet decay rates generated by flash photolysis in the presence of Cu(acac)2. The quenching rate constants of various aromatic ketone and hydrocarbon triplet states by Cu(acac)2 were determined by flash photolysis to be in the order of the diffusion rate constant and the quantum yields of these photoreductions were found to be far from unity. Paramagnetic quenching, with contributions of electron exchange and charge transfer, was proposed as a possible quenching mechanism. For a series of aromatic ketone sensitizers with higher triplet energy, this mechanism was used to rationalize the observed high quenching rate constants in contrast to the low quantum yields of photoreduction.

VARIATION IN SIZE OF THE 'READILY RELEASABLE POOL' OF LUTEINIZING HORMONE DURING THE OESTROUS CYCLE OF THE RAT

1979 ◽  
Vol 83 (1) ◽  
pp. 53-59 ◽  
Author(s):  
A. J.-M. C. PICKERING ◽  
G. FINK
Keyword(s):  
Luteinizing Hormone ◽  
Fold Increase ◽  
Pool Size ◽  
Oestrous Cycle ◽  
Apparent Increase ◽  
Storage Pool ◽  
Releasable Pool ◽  
Readily Releasable Pool ◽  
Significant Change

SUMMARY The size of the 'readily releasable pool' of luteinizing hormone at various times of the oestrous cycle has been determined by injecting a supramaximal dose of luteinizing hormone releasing factor (LH-RF) i.v. into rats anaesthetized with sodium pentobarbitone. In an attempt to block replenishment of the 'pool' during release, cycloheximide was administered 30 min before LH-RF. A 20-fold increase in pool size occurred between the morning of dioestrus and the evening of pro-oestrus in the absence of any significant change in total pituitary content of LH. This suggests that increased responsiveness may be brought about by a change in the receptor-release apparatus and/or a transfer of LH from a 'storage pool' which leads to an apparent increase in the proportion of LH available for release.

scholarly journals Impact of uncertainties in inorganic chemical rate constants on tropospheric composition and ozone radiative forcing

2017 ◽  
Author(s):  
Ben Newsome ◽  
Mat Evans
Keyword(s):  
Rate Constant ◽  
Atmospheric Chemistry ◽  
Rate Constants ◽  
Tropospheric Ozone ◽  
Radiative Forcing ◽  
Transport Model ◽  
Surface Ozone ◽  
Photolysis Rates ◽  
The Impact ◽  
Chemical Rate

Abstract. Chemical rate constants determine the composition of the atmosphere and how this composition has changed over time. They are central to our understanding of climate change and air quality degradation. Atmospheric chemistry models, whether online or offline, box, regional or global use these rate constants. Expert panels synthesise laboratory measurements, making recommendations for the rate constants that should be used. This results in very similar or identical rate constants being used by all models. The inherent uncertainties in these recommendations are, in general, therefore ignored. We explore the impact of these uncertainties on the composition of the troposphere using the GEOS-Chem chemistry transport model. Based on the JPL and IUPAC evaluations we assess 50 mainly inorganic rate constants and 10 photolysis rates, through simulations where we increase the rate of the reactions to the 1σ upper value recommended by the expert panels. We assess the impact on 4 standard metrics: annual mean tropospheric ozone burden, surface ozone and tropospheric OH concentrations, and tropospheric methane lifetime. Uncertainty in the rate constants for NO2 + OH    M →  HNO3, OH + CH4 → CH3O2 + H2O and O3 + NO → NO2 + O2 are the three largest source of uncertainty in these metrics. We investigate two methods of assessing these uncertainties, addition in quadrature and a Monte Carlo approach, and conclude they give similar outcomes. Combining the uncertainties across the 60 reactions, gives overall uncertainties on the annual mean tropospheric ozone burden, surface ozone and tropospheric OH concentrations, and tropospheric methane lifetime of 11, 12, 17 and 17 % respectively. These are larger than the spread between models in recent model inter-comparisons. Remote regions such as the tropics, poles, and upper troposphere are most uncertain. This chemical uncertainty is sufficiently large to suggest that rate constant uncertainty should be considered when model results disagree with measurement. Calculations for the pre-industrial allow a tropospheric ozone radiative forcing to be calculated of 0.412 ± 0.062 Wm−2. This uncertainty (15 %) is comparable to the inter-model spread in ozone radiative forcing found in previous model-model inter-comparison studies where the rate constants used in the models are all identical or very similar. Thus the uncertainty of tropospheric ozone radiative forcing should expanded to include this additional source of uncertainty. These rate constant uncertainties are significant and suggest that refinement of supposedly well known chemical rate constants should be considered alongside other improvements to enhance our understanding of atmospheric processes.

Sign in / Sign up

Export Citation Format

Share Document