Synthesis of bis[µ-bis(diphenylphosphino)methane]-tri-µ-carbonyl-tricarbonyl-triangulo-trirhodium(1+) perchlorate, [Rh3(CO)3(µ-CO)3(µ-dppm)2]ClO4. An unusual 46-electron cluster possessing the A-frame structure with a bridging Rh(CO)3fragment

1985 ◽  
pp. 1577-1583 ◽  
Author(s):  
Samitha P. Deraniyagala ◽  
Kevin R. Grundy
Keyword(s):  
Frame Structure ◽  
Electron Cluster

Space creation, structural construction and force distribution

2013 ◽  
Vol 4 (1) ◽  
pp. 1-12
Author(s):  
G. Lámer
Keyword(s):  
The Other ◽  
Frame Structure ◽  
Force Distribution ◽  
Independent Components ◽  
Other Hand

Abstract The paper is an overview of issues related to the space creation of a building, possibilities of developing frame structure and connections of force distribution in the construction. In plane the force distribution can be compression, bending and tension. In space “enclosing” a geometric solid means space creation. In space as it is to be expected, the force distribution must be compression, bending and tension in two different directions at the same time. This can be really variant but in the case of surface or surface-like constructions generated by translations (and/or rotations) on one hand, there are some other surfaces, which cannot be generated by translations (and/or rotations), on the other hand, the dimension of the inside “forces” is not two but three (independent components of a two-by-two tensor either in the case of compression tension, or in the case of bending). By this, force distribution is more complicated in space than in plane.

Optimal Sensor Placement Algorithm for Structural Damage Identification

2020 ◽  
Vol 14 (1) ◽  
pp. 69-81
Author(s):  
C.H. Li ◽  
Q.W. Yang
Keyword(s):  
Structural Damage ◽  
Damage Identification ◽  
Sensor Placement ◽  
Optimization Procedure ◽  
Frame Structure ◽  
Truss Structures ◽  
Optimal Sensor Placement ◽  
Structural Damage Identification ◽  
Placement Algorithm ◽  
Sensor Locations

Background: Structural damage identification is a very important subject in the field of civil, mechanical and aerospace engineering according to recent patents. Optimal sensor placement is one of the key problems to be solved in structural damage identification. Methods: This paper presents a simple and convenient algorithm for optimizing sensor locations for structural damage identification. Unlike other algorithms found in the published papers, the optimization procedure of sensor placement is divided into two stages. The first stage is to determine the key parts in the whole structure by their contribution to the global flexibility perturbation. The second stage is to place sensors on the nodes associated with those key parts for monitoring possible damage more efficiently. With the sensor locations determined by the proposed optimization process, structural damage can be readily identified by using the incomplete modes yielded from these optimized sensor measurements. In addition, an Improved Ridge Estimate (IRE) technique is proposed in this study to effectively resist the data errors due to modal truncation and measurement noise. Two truss structures and a frame structure are used as examples to demonstrate the feasibility and efficiency of the presented algorithm. Results: From the numerical results, structural damages can be successfully detected by the proposed method using the partial modes yielded by the optimal measurement with 5% noise level. Conclusion: It has been shown that the proposed method is simple to implement and effective for structural damage identification.

5G New Radio: Waveform, Frame Structure, Multiple Access, and Initial Access

2017 ◽  
Vol 55 (6) ◽  
pp. 64-71 ◽  
Author(s):  
Shao-Yu Lien ◽  
Shin-Lin Shieh ◽  
Yenming Huang ◽  
Borching Su ◽  
Yung-Lin Hsu ◽  
...  
Keyword(s):  
Multiple Access ◽  
Frame Structure ◽  
New Radio

Study on Rational Ratios of Lateral Stiffness for Masonry Building with Frame Structure at First Two Stories

2012 ◽  
Vol 174-177 ◽  
pp. 2012-2015
Author(s):  
Xiao Long Zhou ◽  
Ying Min Li ◽  
Lin Bo Song ◽  
Qian Tan
Keyword(s):  
Seismic Performance ◽  
Time History ◽  
Shear Wall ◽  
Calculation Model ◽  
Frame Structure ◽  
Wall Structure ◽  
Masonry Building ◽  
Lateral Stiffness ◽  
Stiffness Ratio ◽  
Lateral Stiffness Ratio

There are two typical seismic damage characteristics to the masonry building with frame shear wall structure at first two stories, and the lateral stiffness ratio of the third storey to the second storey is one of the key factors mostly affecting the seismic performance of this kind of building. However, some factors are not considered sufficiently in current Chinese seismic codes. According to the theory of performance-based seismic design, the seismic performance of this kind of structure is analyzed in this paper by taking time-history analysis on models which with different storey stiffness ratios. The results show that when the lateral stiffness ratio controlled in a reasonable range, the upper masonry deformation can be ensured in a range of elastic roughly, and the bottom frame can be guaranteed to have sufficient deformation and energy dissipation capacity. Finally, according to the seismic performance characteristics of masonry building with frame shear wall structure at first two stories, especially the characteristics under strong earthquakes, a method of simplified calculation model for the upper masonry is discussed in this paper.

Sign in / Sign up

Export Citation Format

Share Document