Preparing high purity λ-Ti3O5 and Li/λ-Ti3O5 as a high performance electromagnetic wave absorber

2021 ◽  
Author(s):  
xiankai fu ◽  
Wanqi Chen ◽  
Xiaowen Hao ◽  
Zhimin Zhang ◽  
Ruolan Tang ◽  
...  
Keyword(s):  
Electromagnetic Wave ◽  
Microwave Absorption ◽  
High Purity ◽  
High Performance ◽  
Room Temperature

This paper reports a new candidate material λ-Ti3O5 for microwave absorption. λ-Ti3O5 has been proposed to be metastable and has emerged at room temperature only in the form of nanocrystals....

The production of high performance YBa2Cu3O7 using nitrogen dioxide

1990 ◽  
Vol 5 (1) ◽  
pp. 22-26 ◽  
Author(s):  
Kevin J. Leary ◽  
Howard W. Jacobson ◽  
Nancy F. Levoy ◽  
Richard A. Lapalomento ◽  
Thomas R. Askew ◽  
...  
Keyword(s):  
Nitrogen Dioxide ◽  
High Purity ◽  
High Performance ◽  
Room Temperature ◽  
Experimental Results ◽  
Energy Dispersive ◽  
Slow Cooling ◽  
X Ray

Energy Dispersive X-ray Spectroscopy (EDS) was used to show that the elemental homogeneity of YBa2Cu3O7 powders can be improved substantially by heating the powder in a nitrogen dioxide-containing atmosphere (e.g., 950°C), followed by annealing in oxygen at 950°C, and slow-cooling to room temperature. The improved homogeneity results in a substantially larger flux exclusion signal for the NO2-treated powder, as measured by both ac and dc techniques. The experimental results suggest a mechanism which involves the formation of a small amount of molten Ba(NO3)2, which acts as a flux that dissolves the constituents and reprecipitates them as high purity YBa2Cu3O7.

High Performance Optoelectronic Devices Based on Bright Perovskite Nanocrystals Synthesized at Room Temperature

2018 ◽  
Author(s):  
Sotirios Christodoulou ◽  
Francesco Di Stasio ◽  
Santanu Pradhan ◽  
Inigo Ramiro ◽  
Yu Bi ◽  
...  
Keyword(s):  
High Performance ◽  
Room Temperature ◽  
Optoelectronic Devices ◽  
Perovskite Nanocrystals

Star-shaped arylacetylene resins derived from silicon

2020 ◽  
Vol 40 (8) ◽  
pp. 676-684
Author(s):  
Niping Dai ◽  
Junkun Tang ◽  
Manping Ma ◽  
Xiaotian Liu ◽  
Chuan Li ◽  
...  
Keyword(s):  
High Performance ◽  
Room Temperature ◽  
Mechanical Test ◽  
Flexural Modulus ◽  
Mechanical Analysis ◽  
Reinforced Composites ◽  
Scanning Calorimetry ◽  
Chemical Structures ◽  
Structures And Properties ◽  
High Performance Resin

AbstractStar-shaped arylacetylene resins, tris(3-ethynyl-phenylethynyl)methylsilane, tris(3-ethynyl-phenylethynyl) phenylsilane, and tris (3-ethynyl-phenylethynyl) silane (TEPHS), were synthesized through Grignard reaction between 1,3-diethynylbenzene and three types of trichlorinated silanes. The chemical structures and properties of the resins were characterized by means of nuclear magnetic resonance, fourier-transform infrared spectroscopy, Haake torque rheomoter, differential scanning calorimetry, dynamic mechanical analysis, mechanical test, and thermogravimetric analysis. The results show that the melt viscosity at 120 °C is lower than 150 mPa⋅s, and the processing windows are as wide as 60 °C for the resins. The resins cure at the temperature as low as 150 °C. The good processabilities make the resins to be suitable for resin transfer molding. The cured resins exhibit high flexural modulus and excellent heat-resistance. The flexural modulus of the cured TEPHS at room temperature arrives at as high as 10.9 GPa. Its temperature of 5% weight loss (Td5) is up to 697 °C in nitrogen. The resins show the potential for application in fiber-reinforced composites as high-performance resin in the field of aviation and aerospace.

scholarly journals Lateral PbS Photovoltaic Devices for High Performance Infrared and Terahertz Photodetectors

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1692
Author(s):  
Emmanuel K. Ampadu ◽  
Jungdong Kim ◽  
Eunsoon Oh
Keyword(s):  
High Performance ◽  
Room Temperature ◽  
Photovoltaic Device ◽  
Photovoltaic Devices ◽  
Temperature Spectrum ◽  
Terahertz Region ◽  
Room Temperature Spectrum ◽  
Ftir Spectrometer ◽  
Titanium Substrates ◽  
Deposition Conditions

We fabricated a lateral photovoltaic device for use as infrared to terahertz (THz) detectors by chemically depositing PbS films on titanium substrates. We discussed the material properties of PbS films grown on glass with varying deposition conditions. PbS was deposited on Ti substrates and by taking advantage of the Ti/PbS Schottky junction, we discussed the photocurrent transients as well as the room temperature spectrum response measured by Fourier transform infrared (FTIR) spectrometer. Our photovoltaic PbS device operates at room temperature for wavelength ranges up to 50 µm, which is in the terahertz region, making the device highly applicable in many fields.

ZnS nanowall coated Ni composites: facile preparation and enhanced electromagnetic wave absorption

RSC Advances ◽  
2014 ◽  
Vol 4 (105) ◽  
pp. 61219-61225 ◽  
Author(s):  
Biao Zhao ◽  
Gang Shao ◽  
Bingbing Fan ◽  
Wanyu Zhao ◽  
Yajun Xie ◽  
...  
Keyword(s):  
Electromagnetic Wave ◽  
Microwave Absorption ◽  
Absorption Properties ◽  
Microwave Absorption Properties ◽  
Electromagnetic Wave Absorption ◽  
Wave Absorption ◽  
Facile Preparation

The microwave absorption properties of ultrathin ZnS wall-coated Ni composites were superior to those of Ni microspheres and ZnS particles.

A novel metal–organic framework derived carbon nanoflower with effective electromagnetic microwave absorption and high-performance electrochemical energy storage properties

2021 ◽  
Author(s):  
Liwei Zhu ◽  
Ning Liu ◽  
Xincheng Lv ◽  
Ziqiu Zhang ◽  
Liangmin Yu ◽  
...  
Keyword(s):  
Energy Storage ◽  
Microwave Absorption ◽  
High Performance ◽  
Metal Organic Framework ◽  
Electrochemical Energy Storage ◽  
Carbon Nanomaterial ◽  
Energy Storage Properties ◽  
Metal Organic ◽  
Storage Properties ◽  
Electrochemical Energy

A novel carbon nanomaterial with unique morphology was prepared and proven to be an effective material for EMWA and electrochemical energy storage.

Sign in / Sign up

Export Citation Format

Share Document