scholarly journals Crack morphologies in drying suspension drops

Soft Matter ◽  
2021 ◽  
Vol 17 (39) ◽  
pp. 8832-8837
Author(s):  
Philippe Bourrianne ◽  
Paul Lilin ◽  
Guillaume Sintès ◽  
Traian Nîrca ◽  
Gareth H. McKinley ◽  
...  
Keyword(s):  
Initial Concentration ◽  
Aqueous Suspensions ◽  
Solid Deposit ◽  
Crack Morphology ◽  
Complex Crack ◽  
Suspension Drops

Drops of aqueous suspensions of nanoparticles placed on a substrate form a solid deposit as they dry. The initial concentration of particles governs both the shape of the deposit and the complex crack morphology.

Applicability of electrodialysis to the separation of sodium acetate from synthetic alkaline hardwood extract

TAPPI Journal ◽  
2015 ◽  
Vol 14 (11) ◽  
pp. 695-708 ◽  
Author(s):  
RAVIKANT PATIL ◽  
CHI TRUONG ◽  
JOSEPH GENCO ◽  
HEMANT PENDSE ◽  
ADRIAAN VAN HEININGEN
Keyword(s):  
Current Density ◽  
Sodium Sulfate ◽  
Sodium Acetate ◽  
Separation Efficiency ◽  
Feed Concentration ◽  
Initial Concentration ◽  
White Liquor ◽  
Complete Extraction ◽  
Electro Osmosis ◽  
Preliminary Separation

Our objective was to develop a process for recovering acetyl groups from industrial northeast hardwood chips. Extraction experiments showed that the white liquor charge of 6% effective alkali at 50°C and liquor-to-wood ratio of 4:1 leads to the complete extraction of acetyl groups from industrial hardwood chips. Electrodialysis was assessed as a technique for separating and concentrating sodium acetate from synthetic hardwood extract. Preliminary separation experiments using dilute sodium acetate showed that the sodium acetate can be concentrated up to approximately 24% by weight from an initial concentration of about 2% by weight. The effects of current density, feed concentration, electro-osmosis, and osmosis on the separation of sodium acetate were evaluated. Finally, selectivity experiments were performed to study the effect of various components of the white liquor on the separation of sodium acetate. Fully oxidized synthetic white liquor was used in selectivity experiments to avoid deleterious effects of Na2S. Selectivity experiments using synthetic oxidized white liquor showed a significant decrease in the separation efficiency due to the presence of sodium hydroxide, sodium carbonate, and sodium sulfate in the synthetic extract.

Photo-catalytic degradation of gaseous pollutants in paper mills of southern China

TAPPI Journal ◽  
2018 ◽  
Vol 17 (03) ◽  
pp. 167-178 ◽  
Author(s):  
Xin Tong ◽  
Jiao Li ◽  
Jun Ma ◽  
Xiaoquan Chen ◽  
Wenhao Shen
Keyword(s):  
Degradation Rate ◽  
Southern China ◽  
Catalytic Degradation ◽  
Pulp And Paper ◽  
Gaseous Pollutants ◽  
Pulp And Paper Mills ◽  
Paper Mills ◽  
Initial Concentration ◽  
First Order ◽  
First Order Kinetics

Studies were undertaken to evaluate gaseous pollutants in workplace air within pulp and paper mills and to consider the effectiveness of photo-catalytic treatment of this air. Ambient air at 30 sampling sites in five pulp and paper mills of southern China were sampled and analyzed. The results revealed that formaldehyde and various benzene-based molecules were the main gaseous pollutants at these five mills. A photo-catalytic reactor system with titanium dioxide (TiO2) was developed and evaluated for degradation of formaldehyde, benzene and their mixtures. The experimental results demonstrated that both formaldehyde and benzene in their pure forms could be completely photo-catalytic degraded, though the degradation of benzene was much more difficult than that for formaldehyde. Study of the photo-catalytic degradation kinetics revealed that the degradation rate of formaldehyde increased with initial concentration fitting a first-order kinetics reaction. In contrast, the degradation rate of benzene had no relationship with initial concentration and degradation did not conform to first-order kinetics. The photo-catalytic degradation of formaldehyde-benzene mixtures indicated that formaldehyde behaved differently than when treated in its pure form. The degradation time was two times longer and the kinetics did not reflect a first-order reaction. The degradation of benzene was similar in both pure form and when mixed with formaldehyde.

Photocatalytic degradation of methylene blue from aqueous solutions using nanopillars-TiO2 thin films: Batch reactor studies

2018 ◽  
Vol 18 (3) ◽  
pp. 81-91 ◽  
Author(s):  
C. Lalhriatpuia
Keyword(s):  
Thin Films ◽  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Organic Carbon ◽  
Photocatalytic Degradation ◽  
Batch Reactor ◽  
Tio2 Thin Films ◽  
Initial Concentration ◽  
Bet Specific Surface Area ◽  
Interfering Ions

Nanopillars-TiO2 thin films was obtained on a borosilicate glass substrate with (S1) and without (S2) polyethylene glycol as template. The photocatalytic behaviour of S1 and S2 thin films was assessed inthe degradation of methylene blue (MB) dye from aqueous solution under batch reactor operations. The thin films were characterized by the SEM, XRD, FTIR and AFM analytical methods. BET specific surface area and pore sizes were also obtained. The XRD data confirmed that the TiO2 particles are in its anatase mineral phase. The SEM and AFM images indicated the catalyst is composed with nanosized pillars of TiO2, evenly distributed on the surface of the substrate. The BET specific surface area and pore sizes of S1 and S2 catalyst were found to be 5.217 and 1.420 m2/g and 7.77 and 4.16 nm respectively. The photocatalytic degradation of MB was well studied at wide range of physico-chemical parameters. The effect of solution pH (pH 4.0 to 10.0) and MB initial concentration (1.0 to 10.0 mg/L) was extensively studied and the effect of several interfering ions, i.e., cadmium nitrate, copper sulfate, zinc chloride, sodium chloride, sodium nitrate, sodium nitrite, glycine, oxalic acid and EDTA in the photocatalytic degradation of MB was demonstrated. The maximum percent removal of MB was observed at pH 8.0 beyond which it started decreasing and a low initial concentration of the pollutant highly favoured the photocatalytic degradation using thin films and the presence of several interfering ions diminished the photocatalytic activity of thin films to some extent. The overall photocatalytic activity was in the order: S2 > S1 > UV. The photocatalytic degradation of MB was followed the pseudo-first-order rate kinetics. The mineralization of MB was studied with total organic carbon measurement using the TOC (total organic carbon) analysis.

Coagulation-condensation structure formation in aqueous suspensions of mixtures of sulfur and gypsum

2013 ◽  
Vol 0 (1) ◽  
pp. 122
Author(s):  
K. Toshtay ◽  
Kuanyshbek Mussabekov ◽  
S. Kumargaliyeva ◽  
С. Turganbay ◽  
Inal Bakhytkyzy
Keyword(s):  
Structure Formation ◽  
Aqueous Suspensions ◽  
Condensation Structure

Comparative Bio-sorption of Cadmium and Nickel Ions from Aqueous Solution onto Fibers of Date Palm using Fluidized Bed Column

2019 ◽  
Vol 70 (5) ◽  
pp. 1507-1512
Author(s):  
Baker M. Abod ◽  
Ramy Mohamed Jebir Al-Alawy ◽  
Firas Hashim Kamar ◽  
Gheorghe Nechifor
Keyword(s):  
Aqueous Solution ◽  
Heavy Metal ◽  
Metal Ions ◽  
Fluidized Bed ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Date Palm ◽  
Operating Conditions ◽  
Initial Concentration ◽  
Bed Height

The aim of this study is to use the dry fibers of date palm as low-cost biosorbent for the removal of Cd(II), and Ni(II) ions from aqueous solution by fluidized bed column. The effects of many operating conditions such as superficial velocity, static bed height, and initial concentration on the removal efficiency of metal ions were investigated. FTIR analyses clarified that hydroxyl, amine and carboxyl groups could be very effective for bio-sorption of these heavy metal ions. SEM images showed that dry fibers of date palm have a high porosity and that metal ions can be trapped and sorbed into pores. The results show that a bed height of 6 cm, velocity of 1.1Umf and initial concentration for each heavy metal ions of 50 mg/L are most feasible and give high removal efficiency. The fluidized bed reactor was modeled using ideal plug flow and this model was solved numerically by utilizing the MATLAB software for fitting the measured breakthrough results. The breakthrough curves for metal ions gave the order of bio-sorption capacity as follow: Cd(II)]Ni(II).

Carbon tetrachloride biodegradation in a fixed-biofilm reactor and its kinetic study

1998 ◽  
Vol 38 (8-9) ◽  
pp. 155-162 ◽  
Author(s):  
G. Jin ◽  
A. J. Englande
Keyword(s):  
Carbon Tetrachloride ◽  
Continuous Flow ◽  
Model Comparison ◽  
Biofilm Reactor ◽  
Pseudomonas Cepacia ◽  
Initial Concentration ◽  
Biphasic Model ◽  
Providencia Stuartii ◽  
Kinetics Of ◽  
Fixed Biofilm

Kinetics of Carbon Tetrachloride biodegradation are evaluated in a continuous-flow fixed-biofilm reactor with controlled initial redox potential. The column was seeded with a mixed culture of indigenous microorganisms Pseudomonas cepacia and Providencia stuartii. The fixed biofilm reactor exhibited 98%–99.9% biodegradation of CT introduced into the reactor at an initial concentration of about 200 μg/l for retention times of 1 to 4 days respectively. Four models were employed to evaluate the kinetics of CT biodegradation. These included: Eckenfelder (1989), Arvin (1991), Bouwer and McCarty (1985) and a biphasic model. Comparison of calculated results with observed results between these models agreed very closely to each other (0.968 < R2 < 0.999). Predicted performance was best described by the model of Bouwer and McCarty (1985). However, the biphasic and Eckenfelder models provided excellent correlations and were much simpler to apply. The biphasic model yielded very good correlations of the data for all detention times evaluated; whereas, the Eckenfelder model effected comparable results only at the longer retention times studied.

Use of Nanopillars-TiO2 Thin Films in the Photocatalytic Degradation of Bromophenol Blue from Aqueous Solution

2018 ◽  
Vol 6 (1) ◽  
pp. 22-30
Author(s):  
C. Lalhriatpuia ◽  
◽  
Thanhming liana ◽  
K. Vanlaldinpuia
Keyword(s):  
Thin Films ◽  
Aqueous Solution ◽  
Photocatalytic Activity ◽  
Photocatalytic Degradation ◽  
Batch Reactor ◽  
Bromophenol Blue ◽  
Tio2 Thin Films ◽  
Initial Concentration ◽  
Bet Specific Surface Area ◽  
Interfering Ions

The photocatalytic activity of Nanopillars-TiO2 thin films was assessed in the degradation of Bromophenol blue (BPB) dye from aqueous solution under batch reactor operations. The thin films were characterized by the XRD, SEM and AFM analytical methods. BET specific surface area and pore sizes were also obtained. The XRD data showed anatase phase of TiO2 particles with average particle size of 25.4 and 21.9 nm, for S1 and S2 catalysts respectively. The SEM and AFM images indicated the catalyst composed with Nanosized pillars of TiO2, evenly distributed on the surface of the substrate. The average height of the pillars was found to be 180 and 40 nm respectively for the S1 and S2 catalyst. The BET specific surface area and pore sizes of S1 and S2 catalyst were found to be 5.217 and 1.420 m2/g and 7.77 and 4.16 nm respectively. The photocatalytic degradation of BPB using the UV light was studied at wide range of physico-chemical parametric studies to determine the mechanism of degradation as well as the practical applicability of the technique. The batch reactor operations were conducted at varied pH (pH 4.0 to 10.0), BPB initial concentration (1.0 to 20.0 mg/L) and presence of several interfering ions, i.e., cadmium nitrate, copper sulfate, zinc chloride, sodium chloride, sodium nitrate, sodium nitrite, glycine, oxalic acid and EDTA in the photocatalytic degradation of BPB. The maximum percent removal of BPB was observed at pH 6.0 and a low initial concentration of the pollutant highly favours the photocatalytic degradation using thin films. The presence of several interfering ions suppressed the photocatalytic activity of thin films to some extent. The time dependence photocatalytic degradation of BPB was demonstrated with the pseudo-first-order rate kinetics. Study was further extended with total organic carbon measurement using the TOC (Total Organic Carbon) analysis. This demonstrated an apparent mineralization of BPB from aqueous solutions.

Sign in / Sign up

Export Citation Format

Share Document